CompTIA PD1-001인증덤프가 ITExamDump전문가들의 끈임 없는 노력 하에 최고의 버전으로 출시되었습니다. 여러분의 꿈을 이루어드리려고 말이죠. IT업계에서 자기만의 자리를 잡고 싶다면CompTIA PD1-001인증시험이 아주 좋은 자격증입니다. 만약CompTIA PD1-001인증시험 자격증이 있다면 일에서도 많은 변화가 있을 것입니다, 연봉상승은 물론, 자기자신만의 공간도 넓어집니다.
ITExamDump의 덤프선택으로CompTIA PD1-001인증시험에 응시한다는 것 즉 성공과 멀지 않았습니다. 여러분의 성공을 빕니다.
ITExamDump에서 출시한 CompTIA인증 PD1-001덤프는CompTIA인증 PD1-001시험에 대비하여 IT전문가들이 제작한 최신버전 공부자료로서 시험패스율이 100%입니다.ITExamDump는 고품질 CompTIA인증 PD1-001덤프를 가장 친근한 가격으로 미래의 IT전문가들께 제공해드립니다. ITExamDump의 소원대로 멋진 IT전문가도 거듭나세요.
한번에CompTIA인증PD1-001시험을 패스하고 싶으시다면 완전 페펙트한 준비가 필요합니다. 완벽한 관연 지식터득은 물론입니다. 우리ITExamDump의 자료들은 여러분의 이런 시험준비에 많은 도움이 될 것입니다.
시험 번호/코드: PD1-001
시험 이름: CompTIA (CompTIA PDI+ Beta Exam)
PD1-001 덤프무료샘플다운로드하기: http://www.itexamdump.com/PD1-001.html
NO.1 A customer has installed a new computer on their network. They can print to the printer but the option
for duplex printing is not available. All other computers have the option. Which of the following is the
cause of the problem?
A.The new computer is printing to the wrong IP address.
B.The new computer is using the wrong protocol.
C.The driver port is not setup correctly.
D.The option has not been selected on the driver.
Answer: D
CompTIA PD1-001 PD1-001기출문제 PD1-001최신덤프 PD1-001
NO.2 Which of the following is the purpose of a torque limiter in a roller?
A.To reduce wear and tear on rollers.
B.To provide resistance but still allow some slippage.
C.To limit the amount of movement by media.
D.To make it easier to replace rollers.
Answer: B
CompTIA인증 PD1-001 PD1-001자료
NO.3 The polygon mirror is located in which of the following components?
A.Developer unit
B.Scanner unit
C.Fuser unit
D.Laser unit
Answer: D
CompTIA인증 PD1-001자격증 PD1-001 PD1-001인증 PD1-001 PD1-001
NO.4 Which of the following is a reason black toner is used in color printers?
A.It decreases the print speed in color laser printers.
B.It prevents moir patterns when printing color photographs.
C.It reduces the cost per page when printing gray scale documents.
D.It makes the color toner resistant to smudging when wet.
Answer: C
CompTIA최신덤프 PD1-001 dumps PD1-001 PD1-001 PD1-001
NO.5 Using the CMYK color model, the color purple is produced by combining cyan and which other color?
A.Green
B.Magenta
C.Yellow
D.Black
Answer: B
CompTIA기출문제 PD1-001 PD1-001 dump PD1-001 PD1-001
NO.6 The customer has a dedicated ink jet fax machine that is used to send and receive faxes only from the
corporate office. The user complains of streaks on the received faxes while the internal self-prints are fine.
Which of the following should a technician recommend?
A.Clean the scanner glass on the distant machine.
B.Clean the scanner glass on the local machine.
C.Clean the printer head on the local machine.
D.Call the telephone company to increase the line signal level.
Answer: A
CompTIA dumps PD1-001 PD1-001
NO.7 How many CCDs are located in a single pass duplex ADF?
A.One
B.2
C.3
D.4
Answer: B
CompTIA PD1-001 PD1-001 PD1-001인증 PD1-001
NO.8 Which of the following components is part of the ink dispersion system?
A.Print Heads
B.Cleaning heads
C.Pickup Roller
D.Charge Assembly
Answer: A
CompTIA PD1-001 dump PD1-001
NO.9 Which of the following stages in the laser print process attracts toner to the latent image on the
photoconductor?
A.Writing
B.Fusing
C.Development
D.Transfer
Answer: C
CompTIA덤프 PD1-001 PD1-001최신덤프
NO.10 Which of the following utilities could be used to determine a subnet mask?
A.PING
B.NSLOOKUP
C.TRACERT
D.IPCONFIG
Answer: D
CompTIA PD1-001 PD1-001
NO.11 During the photoconductor preparation step, residual charge can be removed by which of the
following? (Select TWO).
A.Pressure
B.Oil
C.Light
D.Gravity
E.Electrical Charge
Answer: CE
CompTIA PD1-001 PD1-001덤프
NO.12 In which of the following sections of an MFP would a technician find a Xenon Lamp?
A.The paper feed section
B.The fuser section
C.The scanner section
D.The transfer section
Answer: C
CompTIA PD1-001 PD1-001최신덤프 PD1-001기출문제 PD1-001최신덤프
NO.13 The proper safety guidelines for handling any device specific consumables can be found in which of
the following documentation?
A.Material Safety Data Sheets
B.Installation Guides
C.Consumer Reports
D.Devices Parts Catalog
Answer: A
CompTIA PD1-001 PD1-001 PD1-001
NO.14 An encoder sensor typically detects:
A.paper position.
B.shaft rotation.
C.magnetic flux.
D.laser beam strength.
Answer: B
CompTIA PD1-001 PD1-001자료 PD1-001 PD1-001 pdf
NO.15 Which of the following would be the BEST process for the technician to follow when beginning to
diagnose a unit at a customers site?
A.Check the printers error log, and then inform the primary user what the issue is.
B.Go directly to the printer and investigate any issues that are found.
C.Investigate the printers status, then ask the primary user to write down what they think is wrong.
D.Gather information from the primary user, and then evaluate the printers condition.
Answer: D
CompTIA인증 PD1-001인증 PD1-001 dump PD1-001 PD1-001인증
NO.16 When is it advisable to dump the waste toner from a technicians service vacuum?
A.When it is full.
B.It is not recommended.
C.Before performing preventative maintenance.
D.After each call.
Answer: B
CompTIA PD1-001 PD1-001 pdf PD1-001
NO.17 A customer is concerned about excessive media jamming in their device. Which of the following is the
FIRST thing a technician should check?
A.Media feed rollers
B.Cassette drawers
C.Fusing section
D.Device log data
Answer: D
CompTIA덤프 PD1-001인증 PD1-001덤프 PD1-001 dumps PD1-001
NO.18 A polygon mirror is part of which of the following assemblies?
A.Laser unit
B.Developer unit
C.Charge assembly
D.Fuser assembly
Answer: A
CompTIA PD1-001 PD1-001 dumps PD1-001 PD1-001자료
NO.19 Which of the following functions is associated with the developer unit?
A.Supplies toner to the photoconductor
B.Charges the surface of the photoconductor
C.Writes the latent image on the photoconductor
D.Cleans the photoconductor
Answer: A
CompTIA PD1-001시험문제 PD1-001기출문제 PD1-001최신덤프
NO.20 A technician is troubleshooting a network connectivity issue on a MFD and would like to eliminate the
possibility of another device on the network having the same IP address. The technician should:
A.disconnect the MFD and ping the IP address.
B.disconnect the MFD and ping the subnet mask.
C.disconnect the MFD and ping the loopback address.
D.run the ipconfig command from the command prompt.
Answer: A
CompTIA최신덤프 PD1-001 PD1-001 PD1-001 PD1-001최신덤프 PD1-001인증
빨리 ITExamDump 덤프를 장바구니에 넣으시죠. 그러면 100프로 자신감으로 응시하셔서 한번에 안전하게 패스하실 수 있습니다. 단 한번으로CompTIA PD1-001인증시험을 패스한다…… 여러분은 절대 후회할 일 없습니다.
댓글 없음:
댓글 쓰기