ITExamDump의 Network Appliance인증 NS0-502덤프를 구매하여 공부한지 일주일만에 바로 시험을 보았는데 고득점으로 시험을 패스했습니다.이는ITExamDump의 Network Appliance인증 NS0-502덤프를 구매한 분이 전해온 희소식입니다. 다른 자료 필요없이 단지 저희Network Appliance인증 NS0-502덤프로 이렇게 어려운 시험을 일주일만에 패스하고 자격증을 취득할수 있습니다.덤프가격도 다른 사이트보다 만만하여 부담없이 덤프마련이 가능합니다.구매전 무료샘플을 다운받아 보시면 믿음을 느낄것입니다.
IT업계의 치열한 경쟁속에 살아 남으려면 자신의 능력을 증명하여야 합니다. 국제승인을 받는 IT인증자격증을 많이 취득하시면 취직이든 승진이든 이직이든 모든 면에서 이득을 볼수 있습니다. 최근 Network Appliance인증 NS0-502시험에 도전하는 분이 많은데 ITExamDump에서 Network Appliance인증 NS0-502시험에 대비한 가장 최신버전 덤프공부가이드를 제공해드립니다.
ITExamDump 안에는 아주 거대한IT업계엘리트들로 이루어진 그룹이 있습니다. 그들은 모두 관련업계예서 권위가 있는 전문가들이고 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어냅니다. ITExamDump의 문제와 답은 정확도가 아주 높으며 한번에 패스할수 있는 100%로의 보장도를 자랑하며 그리고 또 일년무료 업데이트를 제공합니다.
만약 여러분은Network Appliance NS0-502인증시험취득으로 이 치열한 IT업계경쟁 속에서 자기만의 자리를 잡고, 스펙을 쌓고, 전문적인 지식을 높이고 싶으십니까? 하지만Network Appliance NS0-502패스는 쉬운 일은 아닙니다.Network Appliance NS0-502패스는 여러분이 IT업계에 한발작 더 가까워졌다는 뜻이죠. 하지만 이렇게 중요한 시험이라고 많은 시간과 정력을 낭비할필요는 없습니다. ITExamDump의 완벽한 자료만으로도 가능합니다. ITExamDump의 덤프들은 모두 전문적으로 IT관련인증시험에 대하여 연구하여 만들어진것이기 때문입니다.
시험 번호/코드: NS0-502
시험 이름: Network Appliance (NetApp Certified Implementation Engineer-SAN and Virtualization)
ITExamDump덤프공부가이드는 업계에서 높은 인지도를 자랑하고 있습니다. ITExamDump제품은 업데이트가 가장 빠르고 적중율이 가장 높아 업계의 다른 IT공부자료 사이트보다 출중합니다. ITExamDump의Network Appliance인증 NS0-502덤프는 이해하기 쉽고 모든Network Appliance인증 NS0-502시험유형이 모두 포함되어 있어 덤프만 잘 이해하고 공부하시면 시험패스는 문제없습니다.
NS0-502 덤프무료샘플다운로드하기: http://www.itexamdump.com/NS0-502.html
NO.1 Which three protocols can be used for communications between a host running SnapDrive for
Windows and the NetApp Storage Controllers? (Choose three.)
A. http:
B. https:
C. ftp:
D. RPC
E. ssh
Answer: ABD
Network Appliance NS0-502 dumps NS0-502기출문제
NO.2 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for an
Emulex LP1xxxx/LPe1xxxx HBA?
A. EMutil
B. SANutil
C. hbainfo
D. SANsurfer
E. HBAnywhere
Answer: E
Network Appliance pdf NS0-502시험문제 NS0-502 NS0-502자료
NO.3 Click the Exhibit button.
Given the information provided in the diagram, what is the appropriate FC topology?
A. point-to-point
B. switched fabric
C. arbitrated loop
D. ring
Answer: B
Network Appliance자료 NS0-502 NS0-502 dumps
NO.4 A company has a Fibre Channel environment and wants to connect a new host in a remote data
center using 50/125um OM2 multi-mode fiber cable and needs to support 2 Gb speeds.
What is the maximum distance of the cable run supported in this situation?
A. 50/125um OM2 multi-mode fiber cable supports up to 500 meters at 2 Gb.
B. 50/125um OM2 multi-mode fiber cable supports up to 10000 meters at 2 Gb.
C. 50/125um OM2 multi-mode fiber cable supports up to 150 meters at 2 Gb.
D. 50/125um OM2 multi-mode fiber cable supports up to 300 meters at 2 Gb.
Answer: D
Network Appliance NS0-502 NS0-502 dump NS0-502
NO.5 What are three relevant perfstat counters to check for unaligned I/O that do not fall on the WAFL
boundary? (Choose three.)
A. wp.partial_write
B. vvol_read.io_valid
C. read/write_align_histo.XX
D. read/write_partial_blocks.XX
E. xinode content misses
Answer: ACD
Network Appliance기출문제 NS0-502 NS0-502 NS0-502 dumps NS0-502자료 NS0-502 dumps
NO.6 A 200-GB LUN is created in an empty 500-GB volume with the volume guarantee option set to Volume.
LUN reservation is enabled and the fractional reserve is set to 100 and scheduled snapshots are
disabled.
Directly after LUN creation, what is the maximum free space available in the volume?
A. 200 GB
B. 300 GB
C. 400 GB
D. 500 GB
Answer: B
Network Appliance기출문제 NS0-502 NS0-502 dumps
NO.7 Any newly installed system with Data ONTAP 7.3.1 supports which cfmode?
A. dual_fabric only
B. single_image
C. partner
D. mixed
Answer: B
Network Appliance인증 NS0-502 NS0-502인증
NO.8 Which FC SAN topology provides the best performance and scalability?
A. cascade
B. core-edge
C. full mesh
D. partial mesh
Answer: B
Network Appliance dump NS0-502 NS0-502 NS0-502
NO.9 Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. full mesh
B. core-edge
C. full cascade
D. partial mesh
Answer: B
Network Appliance dumps NS0-502 dump NS0-502 NS0-502 pdf NS0-502
NO.10 Zoning by World Wide Port Name (WWPN) is deployed and a host HBA is replaced.
Which zone change needs to be made?
A. No changes are necessary.
B. The zone configuration should be changed to include the port to which the HBA is connected.
C. The zone configuration should be changed to include the WWPN of the new HBA; the old WWPN will
be automatically dropped.
D. The zone configuration should be changed to include the WWPN of the new HBA and to remove the
WWPN of the old HBA.
Answer: D
Network Appliance NS0-502시험문제 NS0-502자격증 NS0-502 NS0-502
NO.11 Click the Exhibit button.
In the diagram shown, a portset is created on controller 1 with the command: controller1>portset create -f
ntapportset 0b. This portset is bound to the igroup with all the initiators in it.
How many paths can host 1 see to a LUN on controller 1?
A. six paths
B. four paths
C. eight paths
D. two paths
Answer: D
Network Appliance NS0-502 NS0-502 NS0-502최신덤프
NO.12 Click the Exhibit button.
You see the following error on the storage controller's console or messages file.
What is the most likely cause for this error?
A. portal group misconfiguration
B. iSCSI CHAP misconfiguration
C. iSNS misconfiguration
D. IPsec misconfiguration
Answer: B
Network Appliance덤프 NS0-502덤프 NS0-502 dump
NO.13 Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. core-edge
B. full mesh
C. partial mesh
D. partial cascade
Answer: C
Network Appliance인증 NS0-502최신덤프 NS0-502인증
NO.14 Which utility on Windows 2003 and Windows 2008 can be used to collect information about firmware
and driver versions for an Emulex LP1xxxx/LPe1xxx HBA?
A. EMutil
B. SANutil
C. fcp config
D. SANsurfer
E. HBAnywhere
Answer: E
Network Appliance NS0-502인증 NS0-502자료 NS0-502기출문제
NO.15 A customer has a four-node SUN cluster configuration. Each node has two, dual-ported HBAs.
What is the minimum number of igroups that need to be created to map a LUN to the cluster?
A. 1
B. 2
C. 4
D. 8
Answer: A
Network Appliance NS0-502 NS0-502 NS0-502기출문제
NO.16 A 100-GB thinly provisioned LUN is allocated to a Windows host. 100 GB of data is written into the
LUN. The current capacity utilization on the disk array as well as the host is 100%. 50 GB of data is
deleted from the LUN. Space reclaimer has NOT been run.
What is the current capacity utilization on both the host and the disk array?
A. 50% on the host, 100% on the disk array
B. 100% on the host, 50% on the disk array
C. 50% on the host, 50% on the disk array
D. 100% on the host, 100% on the disk array
Answer: A
Network Appliance NS0-502시험문제 NS0-502최신덤프 NS0-502자격증
NO.17 An organization currently has a NetApp Fibre Channel block-based solution. With limited budget and
resources, they want to create a new disaster recovery site that utilizes a NetApp solution.
What would the optimal solution include?
A. SnapMover and Fibre Channel at the disaster recovery site for all hosts
B. SnapMirror and iSCSI at the disaster recovery site for all hosts
C. Fibre Channel at both locations using ftp to replicate storage
D. MetroCluster and NAS
Answer: B
Network Appliance NS0-502 NS0-502기출문제 NS0-502 NS0-502덤프
NO.18 What would you use to share a data LUN among multiple servers where each server has simultaneous
write access?
A. host-based BootBIOS
B. host-based multipathing
C. host-based volume manager
D. host-based clustered file system
Answer: D
Network Appliance기출문제 NS0-502 NS0-502 NS0-502덤프 NS0-502 NS0-502
NO.19 Click the Exhibit Button
The table highlights the space management policy that is defined for a particular flexvol, acmevol.
Based on the information provided in the table, which action will the storage controller take when it runs
out of space in the volume?
A. It will try deleting Snapshot copies first to reclaim space before trying to grow the volume.
B. It will grow the volume before deleting Snapshot copies.
C. It will only try deleting Snapshot copies to reclaim space and will not grow the volume.
D. It is irrelevant since fractional_reserve is 0%.
Answer: C
Network Appliance최신덤프 NS0-502 NS0-502 NS0-502 NS0-502자료 NS0-502
NO.20 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for a
Qlogic QLAxxx/QLExxxx HBA?
A. EMutil
B. SANutil
C. cfgadmin
D. SANsurfer
E. HBAnywhere
Answer: D
Network Appliance NS0-502 NS0-502자료
ITExamDump의 완벽한 Network Appliance인증 NS0-502덤프는 고객님이Network Appliance인증 NS0-502시험을 패스하는 지름길입니다. 시간과 돈을 적게 들이는 반면 효과는 십점만점에 십점입니다. ITExamDump의 Network Appliance인증 NS0-502덤프를 선택하시면 고객님께서 원하시는 시험점수를 받아 자격증을 쉽게 취득할수 있습니다.
댓글 없음:
댓글 쓰기