Network Appliance 인증 NS0-163 덤프

Network Appliance 인증 NS0-163시험에 도전해보려고 결정하셨다면 ITExamDump덤프공부가이드를추천해드립니다. ITExamDump덤프는 고객님께서 필요한것이 무엇인지 너무나도 잘 알고 있답니다. ITExamDump의 Network Appliance 인증 NS0-163덤프는Network Appliance 인증 NS0-163시험을 쉽게 만듭니다.

ITExamDump는 고객님의 IT자격증취득의 작은 소원을 이루어지게 도워드리는 IT인증시험덤프를 제공해드리는 전문적인 사이트입니다. ITExamDump 표 Network Appliance인증NS0-163시험덤프가 있으면 인증시험걱정을 버리셔도 됩니다. ITExamDump 표 Network Appliance인증NS0-163덤프는 시험출제 예상문제를 정리해둔 실제시험문제에 가장 가까운 시험준비공부자료로서 공을 들이지않고도 시험패스가 가능합니다.

시험 번호/코드: NS0-163
시험 이름: Network Appliance (Network Appliance Data Protection Solutions)

Network Appliance인증 NS0-163시험은 중요한 IT인증자격증을 취득하는 필수시험과목입니다Network Appliance인증 NS0-163시험을 통과해야만 자격증 취득이 가능합니다.자격증을 많이 취득하면 자신의 경쟁율을 높여 다른능력자에 의해 대체되는 일은 면할수 있습니다.ITExamDump에서는Network Appliance 인증NS0-163시험대비덤프를 출시하여 여러분이 IT업계에서 더 높은 자리에 오르도록 도움드립니다. 편한 덤프공부로 멋진 IT전문가의 꿈을 이루세요.

ITExamDump에서 최고최신버전의Network Appliance인증NS0-163시험덤프 즉 문제와 답을 받으실 수 있습니다. 빨리 소지한다면 좋겠죠. 그래야 여러분은 빨리 한번에Network Appliance인증NS0-163시험을 패스하실 수 있습니다.Network Appliance인증NS0-163관련 최고의 자료는 현재까지는ITExamDump덤프가 최고라고 자신 있습니다.

NS0-163 덤프무료샘플다운로드하기: http://www.itexamdump.com/NS0-163.html

NO.1 Which two choices are used to configure a semi-synchronous SnapMirror relationship? (Choose two.)
A. throttle
B. visibility interval
C. outstanding=3s in DOT 7.2
D. using option semi-sync in DOT 7.3 and higher
Answer: CD

Network Appliance   NS0-163최신덤프   NS0-163 dump   NS0-163

NO.2 A snapshot is a frozen, read-only image of the entire Data ONTAP active file system that reflects the
state of the ____________ at the time the snapshot was created.
A. qtrees
B. volume
C. directory
D. storage system
Answer: B

Network Appliance   NS0-163   NS0-163시험문제

NO.3 The SnapVault secondary system allows you to keep a separate schedule of Snapshot copies from
your primary system.
A. True
B. False
Answer: A

Network Appliance인증   NS0-163   NS0-163   NS0-163

NO.4 Data ONTAP uses inodes in an active file system to reference ___________.
A. qtrees
B. disk blocks
C. file segments
D. Snapshot copies
Answer: B

Network Appliance   NS0-163   NS0-163   NS0-163기출문제   NS0-163

NO.5 Which is true of the SnapVault backup of NetApp storage system?
A. The file is the basic unit for SnapVault backup destination.
B. The qtree is the basic unit for SnapVault backup destination.
C. The volume is the basic unit of SnapVault backup destination.
D. The directory is the basic unit for SnapVault backup destination.
Answer: B

Network Appliance   NS0-163자료   NS0-163   NS0-163 pdf

NO.6 Which action will cause a currently in-sync SnapMirror relationship to fall out of sync?
A. Running snapmirror update on the source storage system
B. Running snapmirror release on the source storage system
C. Modifying the /etc/snapmirror.conf file for the relationship on the source storage system
D. Modifying the /etc/snapmirror.conf file for the relationship on the destination storage system
Answer: D

Network Appliance최신덤프   NS0-163덤프   NS0-163 dump

NO.7 The ONTAP SnapVault primary license on the target storage system is required for Open System
SnapVault.
A. True
B. False
Answer: B

Network Appliance   NS0-163   NS0-163시험문제   NS0-163최신덤프

NO.8 Which OSSV tool would you use to perform an OSSV unattended installation?
A. msipackage
B. svunattendossv
C. svconfigpackager
D. unattendpackager
Answer: C

Network Appliance pdf   NS0-163   NS0-163인증   NS0-163   NS0-163덤프

NO.9 Which three /etc/snapmirror.conf entries will support synchronous or semi-synchronous SnapMirror?
(Choose three.)
A. FilerA:source_vol FilerB:destination_vol - sync
B. FilerA:source_vol FilerB:destination_vol - 0-55/5 * * *
C. FilerA:source_vol FilerB:destination_vol outstanding=3s sync
D. FilerA:source_vol FilerB:destination_vol visibility_interval=1hr, outstanding=3ms, cksum=crc32 sync
Answer: ACD

Network Appliance시험문제   NS0-163 dump   NS0-163   NS0-163   NS0-163

NO.10 Which statement applies to the Open Systems SnapVault Free Space Estimator utility?
A. This utility run automatically after each transfer.
B. This utility must be enabled on the secondary storage system.
C. This utility determines if there is sufficient disk space available on the primary to perform an OSSV
transfer.
D. This utility determines if there is sufficient disk space available on the secondary to perform an OSSV
transfer.
Answer: C

Network Appliance시험문제   NS0-163시험문제   NS0-163덤프

NO.11 Which system is recommended as a secondary system for SnapVault?
A. IS1200
B. DataFort
C. NearStore VTL
D. FAS with NearStore license
Answer: D

Network Appliance   NS0-163   NS0-163 dump

NO.12 Which Data ONTAP option sets system-wide throttling for all transfers?
A. options transfer.wide.enable
B. options transfer.throttle.enable
C. options replication.wide.enable
D. options replication.throttle.enable
Answer: D

Network Appliance인증   NS0-163자료   NS0-163

NO.13 Which command creates a new SyncMirror aggregate, letting Data ONTAP select the disk drives?
A. aggr create aggrX -d 12
B. aggr create aggrX -m 12
C. aggr mirror aggrX -m 12
D. aggr mirror aggrX -n 12
Answer: B

Network Appliance   NS0-163 pdf   NS0-163   NS0-163

NO.14 What is the correct format for the scheduling component of a SnapVault schedule?
A. YYYY-MM-DD
B. crontab format
C. cnt[@day_list][@hour_list]
D. List of dates in ISO Date format
Answer: C

Network Appliance   NS0-163 dump   NS0-163   NS0-163 dump   NS0-163 dumps

NO.15 A NearStore license increases the amount of concurrent replication streams.
A. True
B. False
Answer: A

Network Appliance인증   NS0-163   NS0-163기출문제   NS0-163

NO.16 Which command or procedure would you use to undo a volume SnapRestore operation?
A. snap restore -r <vol/snapshotname> vol <path_and_vol_name>
B. snap revert -s <vol/snapshotname> vol <path_and_vol_name>
C. snap restore undo vol <path_and_vol_name>
D. You cannot undo a SnapRestore operation at the volume level.
Answer: D

Network Appliance시험문제   NS0-163   NS0-163 dump

NO.17 Assume fabric-attached MetroCluster using hardware disk ownership. If the local node has its FC HBA
connected to switch bank 1, it owns the disks connected to switch bank ___.
A. 1
B. 2
C. 3
D. 4
Answer: B

Network Appliance   NS0-163   NS0-163

NO.18 Before enabling an active/active configuration, you should verify and compare the configuration of the
nodes. Which tool can perform this task?
A. cf-config-check.cgi script
B. cf status command on both nodes
C. clustercheck script
D. Release Comparison Tool
Answer: A

Network Appliance   NS0-163자격증   NS0-163시험문제   NS0-163   NS0-163기출문제   NS0-163

NO.19 Which option will allow a storage system to SnapMirror from this source system?
A. snapmirror.access <destination_filer>
B. snapmirror.destination <destination_filer>
C. options snapmirror.allow host = <destination_filer>
D. options snapmirror.access host = <destination_filer>
Answer: D

Network Appliance   NS0-163자료   NS0-163

NO.20 The snapvault snap sched -x command is used to ____________.
A. schedule full backups
B. cancel scheduled backups
C. schedule baseline transfer
D. schedule incremental backups
Answer: D

Network Appliance최신덤프   NS0-163 dump   NS0-163 dump   NS0-163   NS0-163

우리사이트가 다른 덤프사이트보다 우수한 점은 바로 자료들이 모두 전면적이고 적중률과 정확입니다. 때문에 우리ITExamDump를 선택함으로Network Appliance인증NS0-163시험준비에는 최고의 자료입니다. 여러분이 성공을 위한 최고의 자료입니다.