만약 아직도Microsoft 70-664시험패스를 위하여 고군분투하고 있다면 바로 우리 ITExamDump를 선택함으로 여러분의 고민을 날려버릴 수 잇습니다, 우리 ITExamDump에서는 최고의 최신의 덤프자료를 제공 합으로 여러분을 도와Microsoft 70-664인증자격증을 쉽게 취득할 수 있게 해드립니다. 만약Microsoft 70-664인증시험으로 한층 업그레이드된 자신을 만나고 싶다면 우리ITExamDump선택을 후회하지 않을 것입니다, 우리ITExamDump과의 만남으로 여러분은 한번에 아주 간편하게Microsoft 70-664시험을 패스하실 수 있으며,Microsoft 70-664자격증으로 완벽한 스펙을 쌓으실 수 있습니다,
최근 IT 업종에 종사하는 분들이 점점 늘어가는 추세하에 경쟁이 점점 치열해지고 있습니다. IT인증시험은 국제에서 인정받는 효력있는 자격증을 취득하는 과정으로서 널리 알려져 있습니다. ITExamDump의 Microsoft인증 70-664덤프는IT인증시험의 한 과목인 Microsoft인증 70-664시험에 대비하여 만들어진 시험전 공부자료인데 높은 시험적중율과 친근한 가격으로 많은 사랑을 받고 있습니다.
ITExamDump에는Microsoft 70-664인증시험의 특별한 합습가이드가 있습니다. 여러분은 많은 시간과 돈을 들이지 않으셔도 많은 IT관련지식을 배우실수 있습니다.그리고 빠른 시일 내에 여러분의 IT지식을 인증 받으실 있습니다. ITExamDump인증자료들은 우리의 전문가들이 자기만의 지식과 몇 년간의 경험으로 준비중인 분들을 위하여 만들었습니다.
시험 번호/코드: 70-664
시험 이름: Microsoft (TS: Microsoft Lync Server 2010, Configuring)
Microsoft인증 70-664시험을 패스하고 싶다면ITExamDump에서 출시한Microsoft인증 70-664덤프가 필수이겠죠. Microsoft인증 70-664시험을 통과하여 원하는 자격증을 취득하시면 회사에서 자기만의 위치를 단단하게 하여 인정을 받을수 있습니다.이 점이 바로 많은 IT인사들이Microsoft인증 70-664시험에 도전하는 원인이 아닐가 싶습니다. ITExamDump에서 출시한Microsoft인증 70-664덤프 실제시험의 거의 모든 문제를 커버하고 있어 최고의 인기와 사랑을 받고 있습니다. 어느사이트의Microsoft인증 70-664공부자료도ITExamDump제품을 대체할수 없습니다.학원등록 필요없이 다른 공부자료 필요없이 덤프에 있는 문제만 완벽하게 공부하신다면Microsoft인증 70-664시험패스가 어렵지 않고 자격증취득이 쉬워집니다.
ITExamDump에서 Microsoft인증 70-664덤프를 구입하시면 퍼펙트한 구매후 서비스를 제공해드립니다. Microsoft인증 70-664덤프가 업데이트되면 업데이트된 최신버전을 무료로 서비스로 드립니다. 시험에서 불합격성적표를 받으시면 덤프구매시 지불한 덤프비용은 환불해드립니다.
IT업계에서 자신만의 위치를 찾으려면 자격증을 많이 취득하는것이 큰 도움이 될것입니다. Microsoft 인증 70-664시험은 아주 유용한 시험입니다. Microsoft 인증70-664시험출제경향을 퍼펙트하게 연구하여ITExamDump에서는Microsoft 인증70-664시험대비덤프를 출시하였습니다. ITExamDump에서 제공해드리는Microsoft 인증70-664시험덤프는 시장에서 판매하고 있는Microsoft 인증70-664덤프중 가장 최신버전덤프로서 덤프에 있는 문제만 공부하시면 시험통과가 쉬워집니다.
Microsoft 인증 70-664시험대비덤프를 찾고 계시다면ITExamDump가 제일 좋은 선택입니다.저희ITExamDump에서는 여라가지 IT자격증시험에 대비하여 모든 과목의 시험대비 자료를 발췌하였습니다. ITExamDump에서 시험대비덤프자료를 구입하시면 시험불합격시 덤프비용환불신청이 가능하고 덤프 1년 무료 업데이트서비스도 가능합니다. ITExamDump를 선택하시면 후회하지 않을것입니다.
70-664 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-664.html
NO.1 You deploy a Lync Server 2010 pool and a hardware load balancer.
You plan to provide load balancing for dial-in conferencing.
You need to identify which TCP ports must be redirected on the hardware load balancer.
Which TCP ports should you identify?
A. 80 and 443
B. 5060 and 5061
C. 5072 and 5073
D. 8056 and 8057
Answer: C
Microsoft자료 70-664 dump 70-664 70-664
NO.2 Your network has Lync Server 2010 deployed.
You deploy a Mediation Server, and then you configure a voice route that uses a SIP trunk.
You create a test user named User1.
You enable Enterprise Voice for User1.
You need to verify that when User1 initiates calls to external telephone numbers, the calls are routed
through the SIP trunk.
What should you run?
A. From the Lync server, run the Test-CSMCXPushNotification cmdlet.
B. From the Lync server, run the New-CsExUmContact cmdlet.
C. From the Lync server, use the Lync Logging Tool and analyze the trace with Snooper
D. From the Lync server, use the Lync Control Panel to test voice routing in the Voice Routing tab
Answer: D
Microsoft dump 70-664자료 70-664 pdf 70-664자격증
NO.3 Your network has Lync Server 2010 deployed.
You deploy dial-in conferencing.
You need to provide the dial-in conferencing information to all the users on the network.
What should you run?
A. lcscmd /server /action:broadcastmessage
B. ocsumutil /ou:users
C. the New-CsAnnouncement cmdlet
D. the Set-CsPinSendCAWelcomeMail cmdlet
Answer: D
Microsoft 70-664 70-664
NO.4 Your network has a Lync Server 2010 infrastructure that contains three servers. The servers are
configured as shown in the following table.
Server2 and Server3 are in a Mediation pool.
You plan to temporarily remove Server2 from the network.
You need to prevent new voice calls from being routed to Server2.
The solution must not disconnect calls in progress.
What should you do?
A. From the Lync Server 2010 Control Panel, modify the status of Server2.
B. From the Lync Server 2010 Control Panel, modify the Voice Routing settings.
C. From the Lync Server 2010 Topology Builder, edit the properties of the PSTN gateway.
D. From the Lync Server 2010 Topology Builder, edit the properties of the Mediation pool.
Answer: A
Microsoft 70-664최신덤프 70-664 dumps 70-664자격증
NO.5 Your network has a Lync Server 2010 infrastructure that uses Enterprise Voice.
You need to enable call park for Enterprise Voice users.
You configure a call park number range.
What should you do next?
A. From the Lync Server 2010 Control Panel, edit the Voice Policy.
B. From the Lync Server 2010 Topology Builder, edit the Site settings.
C. From the Lync Management Shell, run the Set-CsCpsConfiguration cmdlet.
D. From the Lync Management Shell, run the Set-CsVoiceConfiguration cmdlet.
Answer: C
Microsoft자료 70-664 70-664 pdf 70-664
NO.6 Your network has a Lync Server 2010 infrastructure that has a bandwidth policy.
You need to override the bandwidth policy for a user named User1.
What should you do first.?
A. Create a Dial Plan.
B. Create a Voice Policy.
C. Create a Client Policy.
D. Create a Conferencing Policy.
Answer: B
Microsoft기출문제 70-664 70-664 70-664
NO.7 Your network has Lync Server 2010 deployed.
You configure Call Admission Control.
You need to enable Call Admission Control.
Which cmdlet should you run?
A. Set-CsBandwidthPolicyServiceConfiguration.
B. Set-CsMediaConfiguration.
C. Set-CsNetworkConfiguration.
D. Set-CsNetworkInterSitePolicy.
Answer: C
Microsoft시험문제 70-664 70-664 70-664
NO.8 Your network has Lync Server 2010 deployed.
You need to ensure that when users on the PSTN receive calls from users in your organization, the calls
display the telephone number +14255551212.
What should you do?
A. From the Lync Server Management Shell, run the Set-CsVoicePolicy cmdlet.
B. From the Lync Server Management Shell, run the Set-CsCpsConfiguration cmdlet.
C. From Lync Server 2010 Control Panel, edit the Route settings.
D. From Lync Server 2010 Control Panel, create a workflow for a Response Group.
Answer: C
Microsoft pdf 70-664 70-664 70-664시험문제 70-664 70-664시험문제
NO.9 Your company has a telephone number range of (425) 555-1200 to (425) 555-1299.
The country code is 1. The network has Lync Server 2010 deployed.
You need to create a normalization rule for four-digit extension dialing that normalizes extensions to E.164
format.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Set the translation rule to +1425555$1.
B. Set the translation rule to +142555512$1.
C. Set the translation pattern to match
댓글 없음:
댓글 쓰기