우리ITExamDump에는 아주 엘리트 한 전문가들로 구성된 팀입니다 그들은 끈임 없는 연구와 자기자신만의 지식으로 많은 IT관연 덤프자료를 만들어 냄으로 여러분의 꿈을 이루어드립니다, 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는SAP C_TSCM42_64시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다. ITExamDump덤프들은 모두 보장하는 덤프들이며 여러분은 과감히 ITExamDump의 덤프를 장바구니에 넣으세요. ITExamDump에서 여러분의 꿈을 이루어 드립니다.
근 몇년간IT산업이 전례없이 신속히 발전하여 IT업계에 종사하는 분들이 여느때보다 많습니다. 경쟁이 이와같이 치열한 환경속에서 누구도 대체할수 없는 자기만의 자리를 찾으려면 IT인증자격증취득은 무조건 해야 하는것이 아닌가 싶습니다. SAP인증 C_TSCM42_64시험은 IT인증시험중 가장 인기있는 시험입니다. ITExamDump에서는 여러분이SAP인증 C_TSCM42_64시험을 한방에 패스하도록 실제시험문제에 대비한SAP인증 C_TSCM42_64덤프를 발췌하여 저렴한 가격에 제공해드립니다.시험패스 못할시 덤프비용은 환불처리 해드리기에 고객님께 아무런 페를 끼치지 않을것입니다.
ITExamDump는 여러분이SAP 인증C_TSCM42_64인증시험 패스와 추후사업에 모두 도움이 되겠습니다. ITExamDump제품을 선택함으로 여러분은 시간도 절약하고 돈도 절약하는 일석이조의 득을 얻을수 있습니다. 또한 구매후 일년무료 업데이트 버전을 받을수 있는 기회를 얻을수 있습니다. SAP 인증C_TSCM42_64 인증시험패스는 아주 어렵습니다. 자기에 맞는 현명한 학습자료 선택은 성공의 지름길을 내딛는 첫발입니다. 퍼펙트한 자료만이 시험에서 성공할수 있습니다. ITExamDump시험문제와 답이야 말로 퍼펙트한 자료이죠. ITExamDump SAP 인증C_TSCM42_64인증시험자료는 100% 패스보장을 드립니다.
ITExamDump의 SAP인증 C_TSCM42_64덤프는 다른 덤프판매 사이트보다 저렴한 가격으로 여러분들께 가볍게 다가갑니다. SAP인증 C_TSCM42_64덤프는 기출문제와 예상문제로 되어있어 시험패스는 시간문제뿐입니다.
우리ITExamDump에는 아주 엘리트한 전문가들로 구성된 팀입니다. 우리는 아주 정확하게 또한 아주 신속히SAP C_TSCM42_64관한 자료를 제공하며, 업데이트될경우 또한 아주 빠르게 뉴버전을 여러분한테 보내드립니다. ITExamDump는 관련업계에서도 우리만의 브랜드이미지를 지니고 있으며 많은 고객들의 찬사를 받았습니다. 현재SAP C_TSCM42_64인증시험패스는 아주 어렵습니다, 하지만 ITExamDump의 자료로 충분히 시험 패스할 수 있습니다.
시험 번호/코드: C_TSCM42_64
시험 이름: SAP (SAP Certified Application Associate - Production - Planning & Manufacturing with SAP ERP 6.0 EHP4)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 80 문항
업데이트: 2014-03-18
C_TSCM42_64 덤프무료샘플다운로드하기: http://www.itexamdump.com/C_TSCM42_64.html
NO.1 The master data for an in-house production process is to be set up in the SAP ECC system. To
do this, you should create a suitable routing that plans for five operations in an initial sequence
(10,20, 30, 40, 50). There should be an option of relocating operations 30 and 40 to a second
sequence on other work centers if there are capacity bottlenecks. What sequence type would you
use to create the second sequence in the system?
A. Substitute sequence
B. Alternative sequence
C. Parallel sequence
D. Standard sequence
Answer: B
SAP dump C_TSCM42_64 C_TSCM42_64
NO.2 The user you advise requests that you make it possible for the user to produce materials for
stock,for customer orders, projects, orders and cost centers with production orders.
Where can you make settings to ensure these options?
A. Serial number profile.
B. Settlement profile.
C. Valuation variant.
D. Production scheduling profile.
Answer: B
SAP C_TSCM42_64최신덤프 C_TSCM42_64 dumps C_TSCM42_64 pdf C_TSCM42_64자료 C_TSCM42_64인증
NO.3 In your company planning strategies are used in the SAP-ECC demand management that are
based on consumption. Which of the following statements about consumption is true? (Choose
two.)
A. A consumption situation is dynamic and is always restructured with the planning run.
B. Consumption can also take place between order reservations and planned independent
requirements, depending on the strategy.
C. Consumption always takes place on the material level between the planned independent
requirements and the planned orders.
D. The consumption parameters (consumption mode and consumption interval) can be set in the
material master or in the MRP group.
Answer: B,D
SAP C_TSCM42_64시험문제 C_TSCM42_64자료 C_TSCM42_64 C_TSCM42_64인증
NO.4 The company that you advise does not want to manage certain value-intensive materials in
the warehouse stock. Instead, the user wishes to control material provision in such a way that these
materials are procured directly for the production and/or process order. How can you fulfill this
request? (Choose two.)
A. Using the special procurement key subcontracting in the material master for the component
B. Using the special procurement key direct procurement/external procurement in the material
master for the component
C. Using the item type non-stock item in the bill of material for the material in question
D. Using the procurement type external procurement in the material master for the component
E. Controlling the material in question as a co-product
Answer: B,C
SAP최신덤프 C_TSCM42_64 C_TSCM42_64자격증
NO.5 An enterprise based in the USA produces an end product that is used with the unit of
measure"pound" (LB). The material is now to be marketed in the EU. A prerequisite for this is that
the material can be sold with the unit kilogram (KG).
Which of the following solutions does SAP ECC offer?
A. In the basic data customizing, you create a unit of measure group that converts pounds to
kilograms. You then assign this to the material master on basic data view 1.
B. You create a new material with a reference to the original material and assign the metric unit of
measure to the new material master.
C. In the material master, you create a conversion factor for converting pounds to kilograms on
basic data view 1.
D. There is no need to take any action. There is a general conversion in the central customizing of
units of measurements, so that automatic conversion of pounds to kilograms takes place.
Answer: D
SAP덤프 C_TSCM42_64 C_TSCM42_64시험문제
NO.6 Which of the following activities is necessary for the capacity availability check to be carried
out automatically when a production order is released?
A. Activate the availability check and assign a checking rule to the work center for the operation to
be checked.
B. Activate the availability check and assign the check control to the plant.
C. Activate the availability check and assign an overall profile in check control for the business
function order release.
D. Activate the availability check and assign an availability checking group to the material master
for the product to be produced.
Answer: C
SAP dump C_TSCM42_64 dump C_TSCM42_64 C_TSCM42_64
NO.7 Which one of the following scheduling types cannot be assigned as default to an order type
(production order)?
A. Midpoint
B. Forward
C. Only capacity requirements
D. Backward
Answer: A
SAP자료 C_TSCM42_64 C_TSCM42_64 dump C_TSCM42_64최신덤프 C_TSCM42_64자료
NO.8 Which of the following requirements for a manufacturing plant can be supported by using
process
manufacturing? (Choose three.)
A. Master recipe-based manufacturing.
B. Material requirements planning for production resources.
C. Manufacturing without orders.
D. Variable calculation of material quantities (product output, material usage).
E. Manufacturing in charge quantities.
Answer: A,D,E
SAP C_TSCM42_64시험문제 C_TSCM42_64자료 C_TSCM42_64
NO.9 In the SAP ECC system, a material is produced with the help of production orders. Though
originally used for rate-based planning only, the planning table is to be used to plan this material.
On the initial screen of the planning table, you select this material and then receive a message
informing you that you cannot use the planning table for this material.
Which one of the following reasons for this message applies?
A. The series production indicator has not been set.
B. There is no valid production version for this material.
C. There are no planned orders or production orders present.
D. There are no requirements present.
Answer: B
SAP dump C_TSCM42_64 C_TSCM42_64 C_TSCM42_64 pdf
NO.10 A customer has been using planning strategies 30 (production by lots) and 10 (anonymous
maketo-stock production) in SAP ECC. The customer wishes to move in part to planning strategy 40
(planning with final assembly). The issue of consumption has an effect here for the first time.
Which properties apply for consumption with planning strategy 40? (Choose two.)
A. Consumption can lead to an increase of the originally planned overall production quantity.
B. Consumption can result in the subsequent specification and adjustment of planning elements in
terms of quantity and date, by means of customer orders that arrive.
C. Consumption can reduce the originally planned production quantity.
D. Consumption creates a static and binding assignment, between the planned independent
requirements recorded in advance and the customer requirements that arrive, for the entire
procurement process.
Answer: A,B
SAP덤프 C_TSCM42_64 C_TSCM42_64
ITexamdump의 000-400덤프의 VCE테스트프로그램과 C-HANATEC131덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 700-101시험에 대비한 고품질 덤프와 00M-654시험 최신버전덤프를 제공해드립니다. 최고품질 70-467시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기