발달한 네트웨크 시대에 인터넷에 검색하면 많은IBM인증 A2090-550시험공부자료가 검색되어 어느 자료로 시험준비를 해야 할지 망서이게 됩니다. 이 글을 보는 순간 다른 공부자료는 잊고ITExamDump의IBM인증 A2090-550시험준비 덤프를 주목하세요. 최강 IT전문가팀이 가장 최근의IBM인증 A2090-550 실제시험 문제를 연구하여 만든IBM인증 A2090-550덤프는 기출문제와 예상문제의 모음 공부자료입니다. ITExamDump의IBM인증 A2090-550덤프만 공부하면 시험패스의 높은 산을 넘을수 있습니다.
만약 아직도 우리를 선택할지에 대하여 망설이고 있다면. 우선은 우리 사이트에서 ITExamDump가 제공하는 무료인 일부 문제와 답을 다운하여 체험해보시고 결정을 내리시길 바랍니다.그러면 우리의 덤프에 믿음이;갈 것이고,우리 또한 우리의 문제와 답들은 무조건 100%통과 율로 아주 고득점으로IBM인증A2090-550험을 패스하실 수 있습니다,
IBM 인증 A2090-550시험대비덤프를 찾고 계시다면ITExamDump가 제일 좋은 선택입니다.저희ITExamDump에서는 여라가지 IT자격증시험에 대비하여 모든 과목의 시험대비 자료를 발췌하였습니다. ITExamDump에서 시험대비덤프자료를 구입하시면 시험불합격시 덤프비용환불신청이 가능하고 덤프 1년 무료 업데이트서비스도 가능합니다. ITExamDump를 선택하시면 후회하지 않을것입니다.
시험 번호/코드: A2090-550
시험 이름: IBM (Assessment: IBM solidDB and IBM solidDB Universal Cache)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 122 문항
업데이트: 2014-03-19
ITExamDump선택으로IBM A2090-550시험을 패스하도록 도와드리겠습니다. 우선 우리ITExamDump 사이트에서IBM A2090-550관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump에서 제공하는IBM A2090-550덤프로 시험 준비하세요. 만약 시험에서 떨어진다면 덤프전액환불을 약속 드립니다.
IBM인증 A2090-550시험은 멋진 IT전문가로 거듭나는 길에서 반드시 넘어야할 높은 산입니다. IBM인증 A2090-550시험문제패스가 어렵다한들ITExamDump덤프만 있으면 패스도 간단한 일로 변경됩니다. ITExamDump의IBM인증 A2090-550덤프는 100%시험패스율을 보장합니다. IBM인증 A2090-550시험문제가 업데이트되면IBM인증 A2090-550덤프도 바로 업데이트하여 무료 업데이트서비스를 제공해드리기에 덤프유효기간을 연장해는것으로 됩니다.
ITExamDump 에서 출시한 제품 IBM인증A2090-550시험덤프는 고득점으로 시험을 통과한 많은 분들이 검증한 완벽한 시험공부자료입니다. IT업계에 몇십년간 종사한 전문가들의 경험과 노하우로 제작된IBM인증A2090-550덤프는 실제 시험문제에 대비하여 시험유형과 똑같은 유형의 문제가 포함되어있습니다.시험 불합격시 불합격성적표로 덤프비용환불신청을 약속드리기에 아무런 우려없이 덤프를 구매하여 공부하시면 됩니다.
IBM인증A2090-550시험덤프의 문제와 답은 모두 우리의 엘리트들이 자신의 지식과 몇 년간의 경험으로 완벽하게 만들어낸 최고의 문제집입니다. 전문적으로IBM인증A2090-550시험을 응시하는 분들을 위하여 만들었습니다. 여러분이 다른 사이트에서도IBM인증A2090-550시험 관련덤프자료를 보셨을 것입니다 하지만 우리ITExamDump의 자료만의 최고의 전문가들이 만들어낸 제일 전면적이고 또 최신 업데이트일 것입니다.IBM인증A2090-550시험을 응시하고 싶으시다면 ITExamDump자료만의 최고의 선택입니다.
A2090-550 덤프무료샘플다운로드하기: http://www.itexamdump.com/A2090-550.html
NO.1 To set the transaction log retention space size for solidDB Universal Cache in the
solidDB
configuration file (solid.ini), which parameter is used?
A. [LogReader]
MaxLogSize
B. [Com]
ReadBufSize
C. [Hotstandby]
MaxMemLogSize
D. [indexFile]
CacheSize
Answer: A
IBM A2090-550최신덤프 A2090-550 A2090-550자료
NO.2 How many different installations of solidDB binaries can exist on the same host?
A. one
B. as many as can fit
C. one per release of solidDB
D. one per version of solidDB
Answer: B
IBM기출문제 A2090-550 A2090-550
NO.3 Click the Exhibit button.
In the exhibit, what does the attached replication diagram show?
A. All subscriptions are Mirroring Continuous.
B. The subscription FERO_BERW is Inactive.
C. The subscription FERO_BERW is Mirroring Continuous.
D. All subscriptions are using bidirectional Mirroring Continuous.
Answer: C
IBM A2090-550시험문제 A2090-550 A2090-550
NO.4 It is possible when using solsql to run scripts either interactively or nested within
another script.
Which special character is used to identify that you want to execute a script file?
A. &
B. @
C. #
D. !
Answer: B
IBM A2090-550 A2090-550 pdf A2090-550 A2090-550기출문제 A2090-550
NO.5 You have setup solidDB Universal Cache such that you have a table DBA.ORG in the
solidDB
front-end, being mirrored to a back-end database. After some time, you notice that the
subscription is Inactive and you try to start Mirroring (Continuous). The subscription state
remains
Inactive and the Event Log shows that the structure of table DBA.ORG has changed. What is
the
recommended course of action?
A. In solidDB, drop the ORG table and recreate it; then restart the subscription.
B. In the backend database, drop the ORG table and recreate it; then restart the subscription.
C. In solidDB, change the table definition to what it was previously; then restart the
subscription.
D. In the Management Console, use the 'Update table definition' option, for the source in the
Table
Mappings area; then restart the subscription.
Answer: D
IBM A2090-550 A2090-550 A2090-550 pdf A2090-550자료
NO.6 When setting the [HotStandby]SafenessLevel = Auto, which two statements are true
about
transaction durability and HotStandby safeness level? (Choose two.)
A. SafenessLevel switches to 1-safe when using [Logging]DurabilityLevel = 1(Relaxed).
B. SafenessLevel switches to 2-safe when using [Loggng]DurabilityLevel = 2(Adaptive).
C. SafenessLevel switches to 1-safe when using [Logging]DurabilityLevel = 3(Strict).
D. SafenessLevel switches to 2-safe when using [Logging]DurabiltyLevel = 4(Custom).
E. SafenessLevel switches to 1-safe when using [Logging]DurabiltyLevel = 2(Adaptive).
Answer: A,B
IBM pdf A2090-550 A2090-550기출문제 A2090-550자료 A2090-550자격증
NO.7 What are two possible conflict resolution methods between solidDB and a back-end
database?
(Choose two.)
A. Source wins
B. Reference
C. Trigger
D. UserExit
E. Alert user
Answer: A,D
IBM A2090-550 dumps A2090-550 pdf A2090-550기출문제 A2090-550인증
NO.8 Which software components must be installed to deploy IBM solidDB Universal Cache
and provide
access to data residing in an IBM DB2 database?
A. IBM solidDB, IBM InfoSphere CDC for solidDB, IBM DB2, IBM InfoSphere CDC for DB2,
IBM
InfoSphere CDC Access Server, and IBM InfoSphere CDC Management Console
B. IBM solidDB, IBM DB2, IBM Universal Cache for DB2,IBM InfoSphere CDC Replication
Center,
and IBM InfoSphere CDC Management Console
C. IBM solidDB, IBM InfoSphere CDC for solidDB, IBM DB2, IBM InfoSphere CDC Access
Server,
and IBM InfoSphere CDC Management Console
D. IBM solidDB, IBM InfoSphere CDC for solidDB, IBM DB2, IBM InfoSphere CDC for DB2,
IBM
InfoSphere CDC Replication Center, and IBM InfoSphere CDC Management Console
Answer: A
IBM A2090-550 dump A2090-550자격증 A2090-550기출문제 A2090-550
NO.9 A solidDB disk-based database instance has been optimally running for six months and
starts to
experience major degradation in performance. Upon executing an overall DB status report
using ADMIN
COMMAND "status", it is noted that the value for index writes after last merge is at
20945876. Why would this be a probable cause of the performance degradation?
A. A large value for this counter signifies that the creation of indices, after a large batch insert
process, has been halted leading to excessive memory usage which can cause serious
performance issues.
B. A large value for this counter signifies that a large number of transactions are being
checkpointed which can cause serious performance issues.
C. A large value for this counter signifies that the multi-versioning storage tree is not being
flushed
to disk due to a long running transaction which can cause serious performance issues.
D. A large value for this counter signifies that a transaction performing a merge-join is
utilizing a
large amount of memory causing potential process paging/swapping leading to serious
performance issues.
Answer: C
IBM A2090-550자격증 A2090-550
NO.10 What are two possible reasons for high latency between a solidDB in-memory cache
and a back-end
database? (Choose two.)
A. Insufficient network bandwidth for the volume of transactions that are being processed.
B. The network connection between the solidDB in-memory cache and the back-end
database is
down.
C. There is database lock contention on the target database.
D. The CDC instances are stopped.
E. Table mappings are not configured properly.
Answer: A,C
IBM자격증 A2090-550최신덤프 A2090-550인증
NO.11 After completing the upgrade of the Primary server while performing a cold HSB-
incompatible
upgrade, what is the correct sequence of steps to upgrade to the Secondary server?
A. Upgrade both servers; start and verify that the upgraded Primary server is in a PRIMARY
ALONE state; start the Secondary server and verify that it is in a SECONDARY ACTIVE
state;
perform a 'hsb connect' command to resynchronize the servers and restore to normal
operation.
B. Upgrade both servers; start and verify that the upgrade Primary server is in a PRIMARY
ALONE state; start the Secondary server and verify that it is in a SECONDARY ACTIVE
state;
perform a 'hsb netcopy' command followed by 'hsb connect' to resynchronize the servers and
restore to normal operation.
C. Upgrade both servers; start and verify that the upgraded Primary server is in a PRIMARY
ACTIVE state; start the Secondary server and verify that it is in a SECONDARY ALONE
state;
perform a 'hsb connect' command to resynchronize the servers and restore to normal
operation.
D. Upgrade both servers; start and verify that the upgraded Primary server is in a PRIMARY
ALONE state; start the Secondary server and verify that it is in a SECONDARY ALONE
state;
perform a 'hsb netcopy' command followed by 'hsb connect' to resynchronize the servers and
restore to normal operation.
Answer: D
IBM A2090-550시험문제 A2090-550 A2090-550 A2090-550 A2090-550
NO.12 Which statement regarding IBM solidDB Netbackup is true?
A. One IBM solidDB Netbackup Server can only serve one backup source server.
B. The command ADMIN COMMAND 'netbackup' is supported within the [Srv]At
configuration
parameter.
C. NetBackup copies logical database consisting of multiple files to one flat file to the
NetBackupDirectory by default.
D. If the specified remote directory does not exist, it is not created automatically by the
solidDB
Netbackup Server.
Answer: C
IBM A2090-550 A2090-550최신덤프
NO.13 What are two effective ways to increase the throughput of replication between the
solidDB in-
memory cache and a back-end database? (Choose two.)
A. Add a summarization column to the source.
B. Use multiple subscriptions instead of just one.
C. Update the mirror_commit_after_max_transactions parameter to a higher value.
D. Ensure that the conflict resolution mechanism is set to "source".
E. Use only the Mirror (Continuous) form of replication.
Answer: B,C
IBM A2090-550 A2090-550최신덤프 A2090-550 dumps A2090-550
NO.14 To set up solidDB in a standalone, HotStandby or Universal Cache configuration,
where can the
configuration be performed?
A. The configuration is performed from the command line using the solid command with
suitable
option settings and values.
B. The configuration needs to be set in a solid.ini file.
C. The configurations can be set up by using the solsql tool and the operating system
services file.
D. The standalone configuration is set in the solid.ini file while the HotStandby and Universal
Cache configuration is set using the sqlcon tool.
Answer: B
IBM자격증 A2090-550최신덤프 A2090-550자격증
NO.15 What is the correct setup topology when deploying IBM solidDB Universal Cache in
conjunction
with IBM solidDB High Availability (HotStandby) functionality?
A. CDC for solidDB instances are running on both the Primary node and on the Secondary
node,
each CDC instance locally connecting to one solidDB server.
B. CDC for solidDB instance is running on the back-end node, remotely connecting to both
Primary and Secondary solidDB servers.
C. CDC for solidDB instance is running on the back-end node, remotely connecting to the
Primary
server. Connection to the Secondary server is managed using Advanced Replication.
D. CDC for solidDB instance is running on the Primary node, locally connecting to the
Primary
server. Connection to the Secondary server is managed by transparent failover.
Answer: B
IBM시험문제 A2090-550최신덤프 A2090-550인증
NO.16 To administer a HotStandby database you need which privilege?
A. Sys_Sync_Admin_Role
B. Sys_Console_Role
C. Sys_Hotstandby_Role
D. Sys_Replication_Role
Answer: B
IBM pdf A2090-550인증 A2090-550
NO.17 What are two methods for generating a trace file containing database statement
executions
occurring in the solidDB server? (Choose two.)
A. Enable SQL tracing within the solidDB server.
B. Enable ODBC tracing within the solidDB ODBC driver.
C. Enable ODBC tracing within the ODBC Driver Manager.
D. Enable JDBC tracing within the solidDB JDBC driver.
E. Enable JDBC tracing within the JDBC Driver Manager.
Answer: A,C
IBM기출문제 A2090-550인증 A2090-550 A2090-550자격증
NO.18 To execute the admin command "status", what is the correct syntax?
A. solsql -e "COMMAND 'status' " "tcp 1313" dba dba
B. solsql -f "ADMIN STATUS 'status' " "tcp 1313" dba dba
C. solcon "status" "tcp 1313" dba dba
D. solcon -e "status" "tcp 1313" dba dba
Answer: D
IBM A2090-550 A2090-550기출문제 A2090-550
NO.19 Which two are directly visible in solidDB server-side SQL Tracing? (Choose two.)
A. longest lasting statements in duration order
B. timestamps of statement preparation
C. timestamps of individual fetch operations
D. timestamps of individual rpc_session operations.
E. list of statements currently under execution
Answer: B,C
IBM기출문제 A2090-550 A2090-550최신덤프 A2090-550 A2090-550기출문제
NO.20 To execute the HotStandby administrative commands, which type of access privilege
would be
needed?
A. SYS_ADMIN_SYNC_ROLE
B. SYNC_ADMIN_ROLE
C. ADMIN_CONSOLE_ROLE
D. SYS_CONSOLE_ROLE
Answer: D
IBM dump A2090-550덤프 A2090-550기출문제 A2090-550덤프
ITexamdump의 700-104덤프의 VCE테스트프로그램과 00M-620덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 C4040-124시험에 대비한 고품질 덤프와 CD0-001시험 최신버전덤프를 제공해드립니다. 최고품질 C4120-783시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기