ITExamDump 에서 출시한 제품 LSI인증L50-502시험덤프는 고득점으로 시험을 통과한 많은 분들이 검증한 완벽한 시험공부자료입니다. IT업계에 몇십년간 종사한 전문가들의 경험과 노하우로 제작된LSI인증L50-502덤프는 실제 시험문제에 대비하여 시험유형과 똑같은 유형의 문제가 포함되어있습니다.시험 불합격시 불합격성적표로 덤프비용환불신청을 약속드리기에 아무런 우려없이 덤프를 구매하여 공부하시면 됩니다.
ITExamDump의 LSI 인증 L50-502시험덤프공부자료는 pdf버전과 소프트웨어버전 두가지 버전으로 제공되는데 LSI 인증 L50-502실제시험예상문제가 포함되어있습니다.덤프의 예상문제는 LSI 인증 L50-502실제시험의 대부분 문제를 적중하여 높은 통과율과 점유율을 자랑하고 있습니다. ITExamDump의 LSI 인증 L50-502덤프를 선택하시면 IT자격증 취득에 더할것 없는 힘이 될것입니다.
다른 사이트에서도LSI L50-502인증시험관련 자료를 보셨다고 믿습니다.하지만 우리 ITExamDump의 자료는 차원이 다른 완벽한 자료입니다.100%통과 율은 물론ITExamDump을 선택으로 여러분의 직장생활에 더 낳은 개변을 가져다 드리며 ,또한ITExamDump를 선택으로 여러분은 이미 충분한 시험준비를 하였습니다.우리는 여러분이 한번에 통과하게 도와주고 또 일년무료 업데이트서비스도 드립니다.
여러분이 어떤 업계에서 어떤 일을 하든지 모두 항상 업그레이되는 자신을 원할 것입니다.,it업계에서도 이러합니다.모두 자기자신의 업그레이는 물론 자기만의 공간이 있기를 바랍니다.전문적인 IT인사들은 모두 아시다싶이LSI L50-502인증시험이 여러분의 이러한 요구를 만족시켜드립니다.그리고 우리 ITExamDump는 이러한 꿈을 이루어드립니다.
ITExamDump에서 제공하는 제품들은 품질이 아주 좋으며 또 업뎃속도도 아주 빠릅니다 만약 우리가제공하는LSI L50-502인증시험관련 덤프를 구매하신다면LSI L50-502시험은 손쉽게 성공적으로 패스하실 수 있습니다.
시험 번호/코드: L50-502
시험 이름: LSI (LSI SVM5 Solutions Architect)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 114 문항
업데이트: 2013-11-17
수많은LSI인증 L50-502시험공부자료중에서ITExamDump의LSI인증 L50-502덤프가 가장 출중한 원인은 무엇일가요? ITExamDump의LSI인증 L50-502덤프는 실제시험문제의 출제방향을 연구하여 IT전문가로 되어있는 덤프제작팀이 만든 최신버전 덤프입니다. ITExamDump의LSI인증 L50-502덤프가 있으면 힘든LSI인증 L50-502시험이 쉬어져서 자격증을 제일 빠른 시간내에 취득할수 있습니다.제일 어려운 시험을 제일 간단한 방법으로 패스하는 방법은ITExamDump의LSI인증 L50-502덤프로 시험준비 공부를 하는것입니다.
우리 ITExamDump사이트에서 제공되는LSI인증L50-502시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보면 우리ITExamDump에 믿음이 갈 것입니다. 우리ITExamDump의 제품을 구매하신다고 하면 우리는 최선을 다하여 여러분들한테 최고의 버전을 제공함으로 한번에LSI인증L50-502시험을 패스하도록 하겠습니다. IT시험이라고 모두 무조건 외우고 장악하고 많은 시간을 투자해야만 된다는 사상을 깨게 될 것입니다.
L50-502 덤프무료샘플다운로드하기: http://www.itexamdump.com/L50-502.html
NO.1 You have a disaster recovery scenario where newly created SVM Views will be presented to an ESX
server or ESX cluster at a secondary site. To avoid importing the views as new volumes, which ESX
advanced setting should be enabled?
A. port retry
B. resignature
C. device reset
D. LUN reset
Answer: B
LSI시험문제 L50-502 L50-502
NO.2 A customer is using SVM to provide five volumes to a Windows 2008 server. These volumes have
been converted to dynamic disks and striped using the OS. Which consideration should be met if the
customer would like to use PiTs and views to access this data from another server?
A. The data cannot be accessed from another host.
B. multiMigrate should be used to migrate the data to a single volume.
C. A consistency group should be defined for the five volumes.
D. The standard agent must be used to access the view.
Answer: C
LSI pdf L50-502 L50-502 L50-502 dumps
NO.3 Which storage arrays can be migrated under SVM 5 control.?
A. SAS storage array
B. iSCSI storage array
C. FC storage array
D. Infiniband storage array
Answer: C
LSI L50-502자료 L50-502 L50-502 dumps L50-502 dumps
NO.4 Your customer is looking for a high availability solution for company-critical data with an RPO of 0.
Periodically the customer would like to verify the integrity of replicated data. You configure two SVM
domains on two sites and use synchronous multiMirror between the two sites. What are two methods to
verify the data? (Choose two.)
A. Create a PiT on the synchronous multiMirror group, create a view on the second synchronous mirror
job PiT and assign it to a host.
B. Use multiCopy for one of the synchronous multiMirror jobs and then assign the destination volume to a
host.
C. Create a PiT on the second synchronous multiMirror job, create a view for that PiT and assign it to a
host.
D. Create a PiT on the first synchronous multiMirror job, create a view for that PiT and assign it to a host.
Answer: A,C
LSI L50-502 L50-502 pdf L50-502 L50-502
NO.5 A customer would like to implement SVM into their current storage environment and has asked you to
provide a detailed overview of both the SVM and DPM architectures. Where would you suggest that they
locate the required information?
A. Host Compatibility Matrix
B. Deployment Guide for SVM 4
C. SVM User Guide
D. Configuration Knowledge Base for SVM 5
Answer: C
LSI L50-502 L50-502기출문제 L50-502자료 L50-502 L50-502
NO.6 You are implementing zoning for an SVM 5 environment. Which rule should you observe when zoning
servers with DPMs?
A. There should be no more than four paths per DPM to any one server.
B. There should be no more than two paths per DPM to any one server.
C. All servers and DPM front-end ports should reside in the same zone.
D. The servers should be zoned directly with the storage controllers.
Answer: B
LSI덤프 L50-502자격증 L50-502덤프 L50-502기출문제 L50-502
NO.7 A retailer with a SQL database must pull statistics from a production database but would like to do so
without interfering with production work. The statistics are required by three different departments. Which
two methods could be used to do this? (Choose two.)
A. Use multiMigrate on the database volume with one job and assign the destination volume to the three
hosts.
B. Use multiMirror asynchronous on the database volume with three jobs and assign the jobs to the three
hosts.
C. Use multiView on the database volume to create a PiT; create three views for that PiT and assign it to
the three hosts.
D. Use multiCopy on the database volume with three jobs and assign each destination volume to the
three hosts.
Answer: C,D
LSI L50-502 L50-502
NO.8 A customer has an environment that includes existing VMware disks that must be imported into SVM.
VMware marks a signature on the volumes which identifies the controller WWNN and LUN ID. Which
statement describes what you need to take into account when migrating the VMware disks under SVM
control?
A. VMware will not resignature automatically.
B. VMware will present the same LUN ID after importing.
C. VMware will modify the DPM WWNN to match the array WWNN.
D. VMware resignaturing must be set correctly.
Answer: D
LSI L50-502인증 L50-502기출문제 L50-502 pdf
NO.9 You are deploying ESX servers with SVM. You have followed the recommended best practice and
have designed your front-end SAN to have redundant fabrics and allowed for both HBA initiator ports to
see both DPMs. You have created SVM volumes and have presented them to your ESX servers. After
performing an HBA rescan from an ESX server, how many paths should be available to each LUN?
A. 2
B. 4
C. 8
D. 16
Answer: B
LSI L50-502인증 L50-502 L50-502덤프
NO.10 Your customer would like to consolidate multiple storage arrays which are currently under-utilized. The
SAN is not currently managed by SVM. The customer desires the minimal impact to their applications.
Which two statements describe the process to consolidate the arrays under SVM? (Choose two.)
A. Import existing LUNs into SVM pools.
B. Use multiMigrate to move the volumes to the desired array.
C. Use asynchronous mirror to move the volumes to the desired array.
D. Use multiMigrate to move the volumes to the desired array and remove SVM.
Answer: A,B
LSI시험문제 L50-502 dump L50-502자격증 L50-502
NO.11 Your customer has recently begun using hourly PiTs for rapid application recovery. The desire is to
implement a data retention plan where each hourly PiT is kept on disk until 8:00 PM. Four weeks?worth
the customer would like to keep a daily snapshot copy of the data for seven days. Also the customer
wants to keep four weeks worth of weekly views on a secondary, low cost array. The solution should
minimize disk utilization on the primary array. Which three tasks would you implement to accomplish this
goal? (Choose three.)
A. Create a multiCopy of the application data and keep seven copies.
B. Create a View on the most recent PiT each night at 8:00 PM and retain for seven days.
C. Create a multiCopy of the Sunday View to the second array and keep four copies.
D. Purge PiTs on the source volume at 8:00 PM to keep seven PiTs.
E. Use multiMigrate to move the Sunday View to the second array and keep four copies.
Answer: B,C,D
LSI L50-502덤프 L50-502 L50-502기출문제 L50-502 dump
NO.12 You are trying to determine the optimal solution to meet the data recovery needs of a customer. What
will provide your customer with the smallest recovery time objective and array failure protection?
A. asynchronous multiMirror
B. multiView
C. multiCopy
D. synchronous multiMirror
Answer: D
LSI L50-502 pdf L50-502 pdf L50-502 dump L50-502덤프
NO.13 A customer has an AIX high availability cluster multiprocessing (HACMP) environment and would like to
use SVM to provide additional storage to the cluster. Which consideration must be met to access the new
volumes?
A. The AIX light agent must be installed on all nodes.
B. The new volumes must be imported into a volume group.
C. The LSI failover driver must be installed on all nodes.
D. The MPIO driver must be disabled on all nodes.
Answer: A
LSI L50-502자료 L50-502 L50-502 L50-502 L50-502
NO.14 Your customer wants to run backups at any time of the day, using snapshots of production data, leaving
production systems fully online and available during backups. Which SVM application would be used to
achieve their online backup requirement?
A. multiMigrate
B. multiMirror
C. multiView
D. SVM volume management
Answer: C
LSI L50-502 L50-502자료 L50-502기출문제 L50-502
NO.15 A financial institution has an Oracle application that is critical to its business. Which three factors will
enable you to assess how to provide high availability and recovery? (Choose three.)
A. application recovery time objective
B. application recovery point objective
C. distance between data centers
D. number of network adapters
E. distance between servers
Answer: A,B,C
LSI자료 L50-502 L50-502 dumps L50-502 L50-502자료
ITexamdump의 70-342덤프의 VCE테스트프로그램과 HP2-B100덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP2-T23시험에 대비한 고품질 덤프와 74-324시험 최신버전덤프를 제공해드립니다. 최고품질 70-323시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기