ITExamDump는 여러분의 시간을 절약해드릴 뿐만 아니라 여러분들이 안심하고 응시하여 순조로이 패스할수 있도록 도와주는 사이트입니다. ITExamDump는 믿을 수 있는 사이트입니다. IT업계에서는 이미 많이 알려 져있습니다. 그리고 여러분에 신뢰를 드리기 위하여Oracle 1Z0-478관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있게 제공합니다. 아주 만족할 것이라고 믿습니다. 우리는ITExamDump제품에 대하여 아주 자신이 있습니다. 우리Oracle 1Z0-478도 여러분의 무용지물이 아닌 아주 중요한 자료가 되리라 믿습니다. 여러분께서는 아주 순조로이 시험을 패스하실 수 있을 것입니다. ITExamDump선택은 틀림없을 것이며 여러분의 만족할만한 제품만을 제공할것입니다.
IT인증시험을 쉽게 취득하는 지름길은ITExamDump에 있습니다. ITExamDump의Oracle인증 1Z0-569덤프로 시험준비를 시작하면 성공에 가까워집니다. Oracle인증 1Z0-569덤프는 최신 시험문제 출제방향에 대비하여 제작된 예상문제와 기출문제의 모음자료입니다. Oracle인증 1Z0-569덤프는 시험을 통과한 IT업계종사자분들이 검증해주신 세련된 공부자료입니다. ITExamDump의Oracle인증 1Z0-569덤프를 공부하여 자격증을 땁시다.
ITExamDump의Oracle인증1Z0-569자료는 제일 적중률 높고 전면적인 덤프임으로 여러분은 100%한번에 응시로 패스하실 수 있습니다. 그리고 우리는 덤프를 구매 시 일년무료 업뎃을 제공합니다. 여러분은 먼저 우리 ITExamDump사이트에서 제공되는Oracle인증1Z0-569시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다.
시험 이름: Oracle SOA Suite 11g Essentials
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 1Z0-478덤프
100% 합격율 보장
Q&A: 75 문항 1Z0-478덤프자료
업데이트: 2014-05-13
1Z0-478덤프: >>펼쳐보기
시험 이름: Exalogic Elastic Cloud X2-2 Essentials
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 1Z0-569자격증시험
100% 합격율 보장
Q&A: 113 문항 1Z0-569교육
업데이트: 2014-05-13
1Z0-569자격증시험: >>펼쳐보기
ITExamDump는 여러분의 꿈을 이루어줄 뿐만 아니라 일년무료 업뎃서비스도 따릅니다. ITExamDump에서 제공하는 덤프로 여러분은 1000%시험을 패스하실수 있고Oracle 1Z0-569자격증을 취득하실 수 있습니다.지금 바로 사이트에서Oracle 1Z0-569덤프데모 즉 덤프의 일부 문제와 답을 다운 받으셔서 체험하실 수 있습니다.
우리ITExamDump에서는 각종IT시험에 관심있는분들을 위하여, 여러 가지 인증시험자료를 제공하는 사이트입니다. 우리ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공할수록 도와주는 사이트입니다. 우리의 파워는 아주 대단하답니다. 여러분은 우리ITExamDump 사이트에서 제공하는Oracle 1Z0-569관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해봄으로 우리에 믿음이 생기게 될 것입니다.
1Z0-478 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-478.html
NO.1 In your solution, a web service client needs to invoke a series of three web services in support
of a single transaction. The third web service needs the identity of the original web service client.
Which statement describes how the identity is made available by Oracle Web Services Manager
(OWSM)?
A. The transaction manager accesses an internal table that maintains credentials used to invoke
each individual web service in the chain.
B. Each web service in the chain does its own authentication so the third web service handles its
own identity checking.
C. OWSM sets the user in the Java Authentication and Authorization (JAAS) Subject when the first
web service successfully authenticates, and the Java Subject is used by subsequent web services to
access the identity.
D. OWSM stores a SAML token from the first web service invocation in a database table, and that
table is accessed by subsequent web services in the chain to retrieve identity.
Answer: D
Oracle IT자격증 1Z0-478 기출문제 1Z0-478 자격증자료 1Z0-478 시험후기
Explanation:
Oracle Web Services Manager is a component of the Oracle Enterprise Manager Fusion Middleware
Control, a run-time framework that provides centralized management and governance of Oracle
SOA Suite environments and applications. You create and configureOracle Web Services Manager
policies in Oracle Enterprise Manager, and those policies are persisted in a policy store (a database
is recommended). Oracle Web Services Manager lets you define policies against an LDAP directory
and generate standard security tokens (such as SAML tokens) to propagate identities across multiple
Web services used in a single transaction.
NO.2 Identify two features of Oracle BAM.
A. Enterprise Manager's monitoring capabilities are central to Oracle BAM's ability to monitor
performance indicators.
B. You can analyze and present Information from activities spanning multiple systems and
applications.
C. Rich browser-based dashboards provide visibility into current values of key performance
indicators (KPIs).
D. There is a built-in trouble ticket system to track assignment and completion of corrective actions.
Answer: A,C
Oracle 덤프자료 1Z0-478 dumps 1Z0-478 IT시험덤프 1Z0-478 인증 1Z0-478 자료
Explanation:
Note: *Oracle Business Activity Monitoring (Oracle BAM) gives business executives the ability to
monitor their business services and processes in the enterprise, to correlate KPIs down to the actual
business process themselves, and most important, to change business processes quickly or to take
corrective action if the business environment changes.
NO.3 When more than one policy is attached to a policy subject, the combination of policies needs
to be valid. Which statement is true about the valid combination of policies for a policy subject?
A. Only one MTOM policy can be attached to a policy subject.
B. More than one Reliable Messaging policy can be attached to a policy subject.
C. Both a Reliable Messaging policy and a WS-Addressing policy cannot be attached to the same
policy subject.
D. Only one security policy can be attached to a policy subject.
Answer: A
Oracle IT덤프 1Z0-478 시험문제 1Z0-478 인증덤프 1Z0-478 후기 1Z0-478 기출문제
Explanation:
Note:
*Within a SOA composite application, you must attach the Oracle WS-MTOM policy to service and
reference binding components to receive and send MTOM (MIME binary) attachments within
Oracle SOA Suite.
*Message Transmission Optimization Mechanism (MTOM)
Ensures that attachments are in MTOM format. This format enables binary data to be sent to and
from web services. This reduces the transmission size on the wire.
*ReliabilityPolicy
Supports the WS-Reliable Messaging protocol. This guarantees the end-to-end delivery of
messages.
* Addressing Policy Verifies that simple object access protocol (SOAP) messages include
WS-Addressing headers in conformance with the WS-Addressing specification. Transport-level data
is included in the XML message rather than relying on the network-level transport to convey this
information.
NO.4 Composite X invokes an outbound DB adapter to write data to a database table. You have
configured JCA at the binding component as follows:
<property name = "jca.retry.count" type = "xs:int" many = "false" override = "may" > 2</property>
<property name = "jca.retry.interval" type = "xs:int" many = "false" override = "may" > 2</property>
You have also modeled a modeled a fault policy to retry the invocation three times in case of
remoteFault as follows:
<retryCount>3<retryCount>
<retryInterval>3<retryInterval>
Which result describes what happens when the database that is being accessed by the above
binding component goes down?
A. The invocation is retrieved for a total of two times every two seconds. Fault policy retries are
ignored.
B. The invocation is retried for a total of six times every three seconds.
C. The invocation is retried for a total of six times every two seconds.
D. The fault policy retries occur within the JCA retries. So two JCA retries are executed two seconds
apart. Within each JCA retry, three fault policy retries are executed three seconds apart.
E. The JCA retries occur within the fault policy retries. So three fault policy retries are executed
three seconds apart. Within each fault policy retry, two JCA retries are executed two seconds apart.
Answer: E
Oracle pdf 1Z0-478 시험 1Z0-478 최신덤프
Explanation:
Note: *Global retries for any error handling are returned to the BPEL Receive activity instance, for
example, or, more generally, to the point at which the transaction started. Such a retry could occur
if there was an error such as a temporary database fault. The default retry count is by default
indefinite, or specified in the jca.retry.count property.
*Properties you can specify in the composite.xml file include:
/jca.retry.count
Specifies the maximum number of retries before rejection. Again, specifying this value is a pre-
requisite to specifying the other property values.
/jca.retry.interval
Specifies the time interval between retries (measured in seconds.)
*A remoteFault is also thrown inside an activity. It is thrown because the invocation fails. For
example, a SOAP fault is returned by the remote service.
NO.5 Which two approaches are valid when using dynamic partner links in a BPEL process?
A. A WSDL file, which contains multiple services that use the same portType, is available at design
time, but the decision to determine which service is used can only be made at runtime.
B. When the BPEL process is designed, the endpoint URL of the WSDL file is known but the services
and port types are not known.
C. When the BPEL process is designed, the services and port types of the WSDL file are known but
the endpoint URI is not known.
D. A WSDL file, which contains multiple services that use different portTypes, is available at design
time, but the decision to determine which server us used can only be made at runtime.
Answer: A,C
Oracle 시험 1Z0-478 시험문제 1Z0-478 응시료 1Z0-478 시험정보 1Z0-478 IT자격증
Explanation:
A (not D):How To Create a Dynamic Partner Link at Design Time for Use at Runtime
To create a dynamic partner link at design time for use at runtime:
etc
C (not B):The BPEL specification mandates that only the partner endpoint reference (EPR) can be
changed dynamically. In BPEL terms, only the partnerRole of a partner link element can have a new
value assigned. The myRole value doesn't change after the BPEL has been deployed.
Note: *Dynamic Partner Links and Dynamic Addressing During the design-time of an application,
you may need to configure certain services whose endpoints (addresses) are not known beforehand,
or it may be necessary to change an endpoint reference while the application is running. The
Dynamic Partner link feature allows you to dynamically assign an endpoint reference to the partner
link. This means that you can use onepartner link for subsequent calls to different web-services
(provided that the services use the same interface). *For successful deployment of the process, a
partner link should be completely defined. When you deploy the project, the WSDL file for the
partner link should contain and define both the abstract and the concrete information for the
partner link, including address and port, though later the concrete information can be changed
independently from the WSDL file.
NO.6 Identify two correct descriptions of Oracle Web Services Manager (OWSM).
A. It enables you to externalize web services security from the applications youbuild.
B. It manages policies in a distributed policy manager that serves as a single policy enforcement
point.
C. Use security and management events, captured by OWSM agents, are displayed using Oracle
BAM.
D. It supplies predefined security policies that enable declarative security and management
definition.
E. It uses Oracle Event Processing (OEP) to determine when security violations have occurred.
Answer: B,C
Oracle 자격증 1Z0-478 1Z0-478 응시료 1Z0-478 자료
Explanation:
Note: *Oracle WSM allows companies to (1) centrally define and store declarative policies applied
to the multiple web services making up a SOA infrastructure, (2) locally enforce security and
management policies through configurable agents, and (3) monitor runtime security events such as
failed authentication or authorization.
*Oracle Web Services Manager offers a comprehensive and easy-to-use solution for policy
management and security of service infrastructure. It provides visibility and control of the policies
through a centralized administration interface offered by Oracle Enterprise Manager.
NO.7 Which two features are provided by decision tables?
A. Sets of input data can be bucketed and reviewed for gaps.
B. Data sets can be reviewed for conflicts.
C. Data can be used for only one rule evaluation.
D. A rule evaluation can be used only to enter new output data.
Answer: A,B
Oracle PDF 1Z0-478 응시료 1Z0-478 자격증신청 1Z0-478 시험일정 1Z0-478 자료
Explanation:
After you create a Decision Table there are operations that you may want to perform on the
Decision Table, including the following:
(A)Find and fix gaps in a Decision Table (B)Finding and resolving conflicts between rules in a
Decision Table Compact or split cells in a Decision Table Merge a condition or split a condition in a
Decision Table
A: *Compact the Decision Table
In this step you compact the rules to merge from eighteen rules to nine rules. This automatically
eliminates the rules that are not needed and preserves the no gap, no conflict properties for the
Decision Table.
*The Conditions area in a Decision Table includes one or more condition rows. Each condition row
has a condition expression and, for each rule, a condition cell. A condition expression is an
expression that you build in Rules Designer. The condition expression is often a fact property or a
function result, but it can be any expression that has a type that can be associated with a bucketset.
B:A Decision Table displays multiple related rules in a single spreadsheet-style view. In Rules
Designer a Decision Table presents a collection of related business rules with condition rows, rules,
and actions presented in a tabular form that is easy to understand. Business users can compare cells
and their values at a glance and can use Decision Table rule analysis features by clicking icons and
selecting values in Rules Designer to help identify and correct conflicting or missing cases.
NO.8 You expand a business rule component that a colleague added to the BPEL process. You see an
Assign element named Facts_To_Rule_Service.
Which statement is true bout this Assign element?
A. It was added automatically based on entries that your colleague made in the dialog box that
approved when the business rule component was added to the BPEL model.
B. Your colleague manually added this Assign element after adding the business rule component to
the BPEL Model.
C. This Assign element was automatically added when your colleague manually addedthe
corresponding Rule_Service_To_Facts assign to the BPEL model.
D. You can delete this Assign because it was created for documentation purposes only.
Answer: A
Oracle 1Z0-478 응시료 1Z0-478 최신덤프 1Z0-478 자격증시험
Explanation:
Note: *Facts_To_Rule_Service: Assigns the facts to a variable.
댓글 없음:
댓글 쓰기