ITExamDump 안에는 아주 거대한IT업계엘리트들로 이루어진 그룹이 있습니다. 그들은 모두 관련업계예서 권위가 있는 전문가들이고 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어냅니다. ITExamDump의 문제와 답은 정확도가 아주 높으며 한번에 패스할수 있는 100%로의 보장도를 자랑하며 그리고 또 일년무료 업데이트를 제공합니다.
ITExamDump의 Network Appliance인증NS0-163시험대비덤프는 실제시험문제 출제경향을 충분히 연구하여 제작한 완벽한 결과물입니다.실제시험문제가 바뀌면 덤프를 제일 빠른 시일내에 업데이트하도록 하기에 한번 구매하시면 1년동안 항상 가장 최신의Network Appliance인증NS0-163시험덤프자료를 제공받을수 있습니다.
ITExamDump는 오래된 IT인증시험덤프를 제공해드리는 전문적인 사이트입니다. ITExamDump의 Network Appliance인증 NS0-163덤프는 업계에서 널리 알려진 최고품질의Network Appliance인증 NS0-163시험대비자료입니다. Network Appliance인증 NS0-163덤프는 최신 시험문제의 시험범위를 커버하고 최신 시험문제유형을 포함하고 있어 시험패스율이 거의 100%입니다. ITExamDump의Network Appliance인증 NS0-163덤프를 구매하시면 밝은 미래가 보입니다.
시험 번호/코드: NS0-163
시험 이름: Network Appliance (Network Appliance Data Protection Solutions)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 154 문항
업데이트: 2014-04-24
우리ITExamDump의 덤프는 여러분이Network Appliance NS0-163인증시험응시에 도움이 되시라고 제공되는 것입니다, 우라ITExamDump에서 제공되는 학습가이드에는Network Appliance NS0-163인증시험관연 정보기술로 여러분이 이 분야의 지식 장악에 많은 도움이 될 것이며 또한 아주 정확한Network Appliance NS0-163시험문제와 답으로 여러분은 한번에 안전하게 시험을 패스하실 수 있습니다,Network Appliance NS0-163인증시험을 아주 높은 점수로 패스할 것을 보장해 드립니다,
ITExamDump의Network Appliance인증 NS0-163시험대비 덤프는 가격이 착한데 비하면 품질이 너무 좋은 시험전 공부자료입니다. 시험문제적중율이 높아 패스율이 100%에 이르고 있습니다.다른 IT자격증에 관심이 있는 분들은 온라인서비스에 문의하여 덤프유무와 적중율등을 확인할수 있습니다. Network Appliance인증 NS0-163덤프로 어려운 시험을 정복하여 IT업계 정상에 오릅시다.
지금21세기 IT업계가 주목 받고 있는 시대에 그 경쟁 또한 상상할만하죠, 당연히 it업계 중Network Appliance NS0-163인증시험도 아주 인기가 많은 시험입니다. 응시자는 매일매일 많아지고 있으며, 패스하는 분들은 관련it업계에서 많은 지식과 내공을 지닌 분들뿐입니다.
지금 같은 경쟁력이 심각한 상황에서Network Appliance NS0-163시험자격증만 소지한다면 연봉상승 등 일상생활에서 많은 도움이 될 것입니다.Network Appliance NS0-163시험자격증 소지자들의 연봉은 당연히Network Appliance NS0-163시험자격증이 없는 분들보다 높습니다. 하지만 문제는Network Appliance NS0-163시험패스하기가 너무 힘듭니다. ITExamDump는 여러분의 연봉상승을 도와 드리겠습니다.
NS0-163 덤프무료샘플다운로드하기: http://www.itexamdump.com/NS0-163.html
NO.1 Which statement applies to the Open Systems SnapVault Free Space Estimator utility?
A. This utility run automatically after each transfer.
B. This utility must be enabled on the secondary storage system.
C. This utility determines if there is sufficient disk space available on the primary to perform an OSSV
transfer.
D. This utility determines if there is sufficient disk space available on the secondary to perform an OSSV
transfer.
Answer: C
Network Appliance NS0-163 NS0-163
NO.2 Which command creates a new SyncMirror aggregate, letting Data ONTAP select the disk drives?
A. aggr create aggrX -d 12
B. aggr create aggrX -m 12
C. aggr mirror aggrX -m 12
D. aggr mirror aggrX -n 12
Answer: B
Network Appliance NS0-163 NS0-163 NS0-163인증
NO.3 Which option will allow a storage system to SnapMirror from this source system?
A. snapmirror.access <destination_filer>
B. snapmirror.destination <destination_filer>
C. options snapmirror.allow host = <destination_filer>
D. options snapmirror.access host = <destination_filer>
Answer: D
Network Appliance NS0-163 NS0-163 NS0-163 pdf
NO.4 Before enabling an active/active configuration, you should verify and compare the configuration of the
nodes. Which tool can perform this task?
A. cf-config-check.cgi script
B. cf status command on both nodes
C. clustercheck script
D. Release Comparison Tool
Answer: A
Network Appliance인증 NS0-163시험문제 NS0-163 dump NS0-163 dump
NO.5 The snapvault snap sched -x command is used to ____________.
A. schedule full backups
B. cancel scheduled backups
C. schedule baseline transfer
D. schedule incremental backups
Answer: D
Network Appliance시험문제 NS0-163 NS0-163자료 NS0-163인증 NS0-163
NO.6 Assume fabric-attached MetroCluster using hardware disk ownership. If the local node has its FC HBA
connected to switch bank 1, it owns the disks connected to switch bank ___.
A. 1
B. 2
C. 3
D. 4
Answer: B
Network Appliance dumps NS0-163시험문제 NS0-163 NS0-163
NO.7 Data ONTAP uses inodes in an active file system to reference ___________.
A. qtrees
B. disk blocks
C. file segments
D. Snapshot copies
Answer: B
Network Appliance덤프 NS0-163자격증 NS0-163
NO.8 Which three /etc/snapmirror.conf entries will support synchronous or semi-synchronous SnapMirror?
(Choose three.)
A. FilerA:source_vol FilerB:destination_vol - sync
B. FilerA:source_vol FilerB:destination_vol - 0-55/5 * * *
C. FilerA:source_vol FilerB:destination_vol outstanding=3s sync
D. FilerA:source_vol FilerB:destination_vol visibility_interval=1hr, outstanding=3ms, cksum=crc32 sync
Answer: ACD
Network Appliance덤프 NS0-163 NS0-163자격증 NS0-163인증 NS0-163
NO.9 Which system is recommended as a secondary system for SnapVault?
A. IS1200
B. DataFort
C. NearStore VTL
D. FAS with NearStore license
Answer: D
Network Appliance자료 NS0-163 NS0-163
NO.10 The SnapVault secondary system allows you to keep a separate schedule of Snapshot copies from
your primary system.
A. True
B. False
Answer: A
Network Appliance자격증 NS0-163 NS0-163 NS0-163
NO.11 Which is true of the SnapVault backup of NetApp storage system?
A. The file is the basic unit for SnapVault backup destination.
B. The qtree is the basic unit for SnapVault backup destination.
C. The volume is the basic unit of SnapVault backup destination.
D. The directory is the basic unit for SnapVault backup destination.
Answer: B
Network Appliance최신덤프 NS0-163 NS0-163 pdf NS0-163덤프
NO.12 Which action will cause a currently in-sync SnapMirror relationship to fall out of sync?
A. Running snapmirror update on the source storage system
B. Running snapmirror release on the source storage system
C. Modifying the /etc/snapmirror.conf file for the relationship on the source storage system
D. Modifying the /etc/snapmirror.conf file for the relationship on the destination storage system
Answer: D
Network Appliance NS0-163덤프 NS0-163자격증 NS0-163인증
NO.13 A snapshot is a frozen, read-only image of the entire Data ONTAP active file system that reflects the
state of the ____________ at the time the snapshot was created.
A. qtrees
B. volume
C. directory
D. storage system
Answer: B
Network Appliance dump NS0-163최신덤프 NS0-163자료 NS0-163 NS0-163자격증 NS0-163
NO.14 The ONTAP SnapVault primary license on the target storage system is required for Open System
SnapVault.
A. True
B. False
Answer: B
Network Appliance인증 NS0-163덤프 NS0-163자격증
NO.15 Which two choices are used to configure a semi-synchronous SnapMirror relationship? (Choose two.)
A. throttle
B. visibility interval
C. outstanding=3s in DOT 7.2
D. using option semi-sync in DOT 7.3 and higher
Answer: CD
Network Appliance자격증 NS0-163 pdf NS0-163 dumps NS0-163덤프 NS0-163
NO.16 Which OSSV tool would you use to perform an OSSV unattended installation?
A. msipackage
B. svunattendossv
C. svconfigpackager
D. unattendpackager
Answer: C
Network Appliance자격증 NS0-163 dump NS0-163최신덤프 NS0-163인증 NS0-163기출문제
NO.17 A NearStore license increases the amount of concurrent replication streams.
A. True
B. False
Answer: A
Network Appliance NS0-163 dumps NS0-163 dumps NS0-163 NS0-163 dumps
NO.18 What is the correct format for the scheduling component of a SnapVault schedule?
A. YYYY-MM-DD
B. crontab format
C. cnt[@day_list][@hour_list]
D. List of dates in ISO Date format
Answer: C
Network Appliance NS0-163 NS0-163 NS0-163
NO.19 Which Data ONTAP option sets system-wide throttling for all transfers?
A. options transfer.wide.enable
B. options transfer.throttle.enable
C. options replication.wide.enable
D. options replication.throttle.enable
Answer: D
Network Appliance NS0-163 dump NS0-163 NS0-163 NS0-163시험문제
NO.20 Which command or procedure would you use to undo a volume SnapRestore operation?
A. snap restore -r <vol/snapshotname> vol <path_and_vol_name>
B. snap revert -s <vol/snapshotname> vol <path_and_vol_name>
C. snap restore undo vol <path_and_vol_name>
D. You cannot undo a SnapRestore operation at the volume level.
Answer: D
Network Appliance자료 NS0-163자격증 NS0-163최신덤프
ITexamdump의 98-373덤프의 VCE테스트프로그램과 000-540덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 MB2-702시험에 대비한 고품질 덤프와 MB6-886시험 최신버전덤프를 제공해드립니다. 최고품질 70-481시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기