2014년 4월 18일 금요일

Microsoft 70-412 덤프

ITExamDump는Microsoft인증70-412시험에 대하여 가이드를 해줄 수 있는 사이트입니다. ITExamDump는 여러분의 전업지식을 업그레이드시켜줄 수 잇고 또한 한번에Microsoft인증70-412시험을 패스하도록 도와주는 사이트입니다. ITExamDump제공하는 자료들은 모두 it업계전문가들이 자신의 지식과 끈임없은 경헌등으로 만들어낸 퍼펙트 자료들입니다. 품질은 정확도 모두 보장되는 문제집입니다.Microsoft인증70-412시험은 여러분이 it지식을 한층 업할수 잇는 시험이며 우리 또한 일년무료 업데이트서비스를 제공합니다.

ITExamDump 에서 제공해드리는 Microsoft인증70-412시험덤프자료를 구입하시면 퍼펙트한 구매후 서비스를 약속드립니다. ITExamDump에서 제공해드리는 덤프는 IT업계 유명인사들이 자신들의 노하우와 경험을 토대로 하여 실제 출제되는 시험문제를 연구하여 제작한 최고품질의 덤프자료입니다. Microsoft인증70-412시험은ITExamDump 표Microsoft인증70-412덤프자료로 시험준비를 하시면 시험패스는 아주 간단하게 할수 있습니다. 구매하기전 PDF버전 무료샘플을 다운받아 공부하세요.

ITExamDump 에서 출시한Microsoft인증70-412 덤프는Microsoft인증70-412 실제시험의 출제범위와 출제유형을 대비하여 제작된 최신버전 덤프입니다. 시험문제가 바뀌면 제일 빠른 시일내에 덤프를 업데이트 하도록 최선을 다하고 있으며 1년 무료 업데이트서비스를 제공해드립니다. 1년 무료 업데이트서비스를 제공해드리기에 시험시간을 늦추어도 시험성적에 아무런 페를 끼치지 않습니다. ITExamDump에 믿음을 느낄수 있도록 구매사이트마다 무료샘플 다운가능기능을 설치하였습니다.무료샘플을 체험해보시고ITExamDump을 선택해주세요.

ITExamDump에는Microsoft 70-412인증시험의 특별한 합습가이드가 있습니다. 여러분은 많은 시간과 돈을 들이지 않으셔도 많은 IT관련지식을 배우실수 있습니다.그리고 빠른 시일 내에 여러분의 IT지식을 인증 받으실 있습니다. ITExamDump인증자료들은 우리의 전문가들이 자기만의 지식과 몇 년간의 경험으로 준비중인 분들을 위하여 만들었습니다.

ITExamDump는 IT인증자격증시험에 대비한 덤프공부가이드를 제공해드리는 사이트인데 여러분의 자격증 취득의 꿈을 이루어드릴수 있습니다. Microsoft인증 70-412시험을 등록하신 분들은 바로ITExamDump의Microsoft인증 70-412덤프를 데려가 주세요. 단기간에 시험패스의 기적을 가져다드리는것을 약속합니다.

시험 번호/코드: 70-412
시험 이름: Microsoft (Configuring Advanced Windows Server 2012 Services)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 254 문항
업데이트: 2014-04-17

70-412 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-412.html

NO.1 Note: This question is part of a series of questions that use the same or similar answer choices.
An
answer choice may be correct for more than one question in the series. Each question is
independent of
the other questions in this series. Information and details provided in a question apply only to that
question. Your network contains an Active Directory domain named contoso.com. The domain
contains
two member servers named Server1 and Server2. All servers run Windows Server 2012. Server1
and
Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a
failover
cluster named Cluster1. You add two additional nodes in Cluster1. You have a folder named Folder1
on
Server1 that hosts application data. Folder1 is a folder target in a Distributed File System (DFS)
namespace. You need to provide highly available access to Folder1. The solution must support DFS
Replication to Folder1. What should you configure?
A. the cluster quorum settings
B. Affinity
Single
C. live migration
D. the preferred owner
E. quick migration
F. the Scale-Out File Server
G. Affinity
None
H. the possible owner
I. the Handling priority
J. the host priority
K. a file server for general use
L. the failover settings
Answer: K

Microsoft   70-412   70-412   70-412 pdf

NO.2 Your network contains an Active Directory domain named contoso.com. The domain contains
two
servers named Server1 and Server2 that run Windows Server 2012. Server1 has the DHCP Server
server role installed. Server2 has the Hyper-V server role installed. Server2 has an IP address of
192.168.10.50. Server1 has a scope named Scope1 for the 192.168.10.0/24 network. You plan to
deploy
20 virtual machines on Server2 that will be connected to the external network. The MAC addresses
for the
virtual machines will begin with 00-15-5D-83-03. You need to configure Server1 to offer the virtual
machines IP addresses from 192.168.10.200 to 192.168.10.219. Physical computers on the network
must
be offered IP addresses outside this range. You want to achieve this goal by using the minimum
amount
of administrative effort. What should you do from the DHCP console?
A. Delete Scope1 and create two new scopes.
B. Configure Allow filters and Deny filters.
C. Create a policy.
D. Create reservations.
Answer: C

Microsoft   70-412   70-412   70-412덤프

NO.3 You have a datacenter that contains six servers. Each server has the Hyper-V server role
installed and
runs Windows Server 2012. The servers are configured as shown in the following table.
Host4 and Host5 are part of a cluster named Cluster1. Cluster1 hosts a virtual machine named VM1.
You
need to move VM1 to another Hyper-V host. The solution must minimize the downtime of VM1. To
which
server and by which method should you move VM1?
A. to Host6 by using a storage migration
B. to Host2 by using a live migration
C. to Host3 by using a storage migration
D. to Host1 by using a quick migration
Answer: C

Microsoft   70-412   70-412   70-412덤프   70-412 dump

NO.4 Note: This question is part of a series of questions that use the same or similar answer choices.
An
answer choice may be correct for more than one question in the series. Each question is
independent of
the other questions in this series. Information and details provided in a question apply only to that
question. Your network contains an Active Directory domain named contoso.com. The domain
contains
two member servers named Server1 and Server2. All servers run Windows Server 2012. Server1
and
Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a
failover
cluster named Cluster1. You add two additional nodes to Cluster1. You need to ensure that Cluster1
stops
running if three nodes fail. What should you configure?
A. the possible owner
B. a file server for general use
C. live migration
D. the Handling priority
E. the preferred owner
F. the cluster quorum settings
G. the host priority
H. the Scale-Out File Server
I. the failover settings
J. Affinity
Single
K. Affinity
None
L. quick migration
Answer: F

Microsoft자료   70-412 dump   70-412   70-412 pdf   70-412최신덤프

NO.5 Your network contains an Active Directory domain named contoso.com. A previous
administrator
implemented a Proof of Concept installation of Active Directory Rights Management Services (AD
RMS).
After the proof of concept was complete, the Active Directory Rights Management Services server
role
was removed. You attempt to deploy AD RMS. During the configuration of AD RMS, you receive an
error
message indicating that an existing AD RMS Service Connection Point (SCP) was found. You need to
remove the existing AD RMS SCP . Which tool should you use?
A. ADSI Edit
B. Active Directory Users and Computers
C. Active Directory Domains and Trusts
D. Active Directory Sites and Services
E. Services
F. Authorization Manager
G. TPM Management
H. Certification Authority
Answer: AD

Microsoft   70-412   70-412기출문제   70-412시험문제

ITexamdump의 M2040-723덤프의 VCE테스트프로그램과 M2020-623덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 642-980시험에 대비한 고품질 덤프와 70-342시험 최신버전덤프를 제공해드립니다. 최고품질 VDCD510시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/70-412.html

댓글 없음:

댓글 쓰기