많은 시간과 돈이 필요 없습니다. 30분이란 특별학습가이드로 여러분은HP HP0-J66인증시험을 한번에 통과할 수 있습니다, ITExamDump에서HP HP0-J66시험자료의 문제와 답이 실제시험의 문제와 답과 아주 비슷한 덤프만 제공합니다.
HP인증 HP0-J66시험을 패스하는 지름길은ITExamDump에서 연구제작한 HP 인증HP0-J66시험대비 덤프를 마련하여 충분한 시험준비를 하는것입니다. 덤프는 HP 인증HP0-J66시험의 모든 범위가 포함되어 있어 시험적중율이 높습니다. HP 인증HP0-J66시험패는 바로 눈앞에 있습니다. 링크를 클릭하시고ITExamDump의HP 인증HP0-J66시험대비 덤프를 장바구니에 담고 결제마친후 덤프를 받아 공부하는것입니다.
ITExamDump에서 제공해드리는 HP인증 HP0-J66덤프는 가장 출중한HP인증 HP0-J66시험전 공부자료입니다. 덤프품질은 수많은 IT인사들로부터 검증받았습니다. HP인증 HP0-J66덤프뿐만아니라 ITExamDump에서는 모든 IT인증시험에 대비한 덤프를 제공해드립니다. IT인증자격증을 취득하려는 분들은ITExamDump에 관심을 가져보세요. 구매의향이 있으시면 할인도 가능합니다. 고득점으로 패스하시면 지인분들께 추천도 해주실거죠?
시험 번호/코드: HP0-J66
시험 이름: HP (HP Storage Migration)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 75 문항
업데이트: 2014-02-26
HP HP0-J66인증시험을 패스하려면 시험대비자료선택은 필수입니다. 우리ITExamDump에서는 빠른 시일 내에HP HP0-J66관련 자료를 제공할 수 있습니다. ITExamDump의 전문가들은 모두 경험도 많고, 그들이 연구자료는 실제시험의 문제와 답과 거이 일치합니다. ITExamDump 는 인증시험에 참가하는 분들한테 편리를 제공하는 사이트이며,여러분들이 시험패스에 도움을 줄 수 있는 사이트입니다.
HP인증 HP0-J66시험패스 공부방법을 찾고 있다면 제일 먼저ITExamDump를 추천해드리고 싶습니다. HP인증 HP0-J66시험이 많이 어렵다는것은 모두 알고 있는 것입니다. ITExamDump에서 출시한 HP인증 HP0-J66덤프는 실제시험을 대비하여 연구제작된 멋진 작품으로서 HP인증 HP0-J66시험적중율이 최고입니다. HP인증 HP0-J66시험패스를 원하신다면ITExamDump의 제품이 고객님의 소원을 들어줄것입니다.
HP인증 HP0-J66시험에 도전하고 싶으시다면 최강 시험패스율로 유명한ITExamDump의 HP인증 HP0-J66덤프로 시험공부를 해보세요. 시간절약은 물론이고 가격도 착해서 간단한 시험패스에 딱 좋은 선택입니다. HP 인증HP0-J66시험출제경향을 퍼펙트하게 연구하여ITExamDump에서는HP 인증HP0-J66시험대비덤프를 출시하였습니다. ITExamDump제품은 고객님의 IT자격증 취득의 앞길을 훤히 비추어드립니다.
HP0-J66 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-J66.html
NO.1 A customer needs to be able to recover their data in the event of a site failure.
They have a strict recovery point objective for their business-critical applications.
Which technique should the customer use?
A. snapshots
B. backups to tape
C. backups to disk
D. remote replication
Answer: D
HP자료 HP0-J66최신덤프 HP0-J66 HP0-J66최신덤프
Explanation:
Need replication to get the data to a backup site.
Note:
*Recovery Point Objective (RPO) refers to the required point-in-time to which a DR solution
canrestore the state of data for a particular service, for example, how much data loss is
acceptablefollowing a disaster. These requirements can range from "close to zero" data loss (for
high-valuefinancial transactions, for example) to some small number of minutes of the most recent
NO.2 A customer is planning to migrate their master database to a remote location. Their network
uses GbE for FCIP tunneling. Which Fibre Channel switch port interface must they use?
A. EX_Port
B. E_Port
C. VEX_Port
D. VE_Port
Answer: D
HP자료 HP0-J66 dump HP0-J66
Explanation:
*VE_Port-Virtual E_Port used with a GbE port for FCIP tunneling
*You can configure a Fibre Channel port as an F_Port, FL_Port, E_Port, or EX_Port (Fibre Channel
routing),and configure a GbE port as a VE_Port (FCIP) or VEX_Port (FCIP with Fibre Channel routing).
NO.3 As part of an upgrade of their existing infrastructure, a customer is considering replacing their
Fibre Channel host bus adapters (HBAs) and Ethernet converged network adapters (CNAs).
How can they expect to improve efficiency through this upgrade?
A. 3:1 port consolidation
B. path failover redundancy
C. greater aggregate throughput
D. cable reduction up to 75%
Answer: A
HP HP0-J66시험문제 HP0-J66 HP0-J66
Explanation:
The HP Dual Port Converged Network Adapters (CNAs) are dual port adapters that provide Ethernet,
iSCSI, and Fibre Channel (FC) connectivity over 10GbE using both Fibre Channel over Ethernet (FCoE)
and Converged Enhanced Ethernet (CEE) standards. By consolidating Ethernet, iSCSI, and Fibre
Channel onto a converged network adapter, HP CNAs reduce the number of separate adapters and
cables required for your datacenter and also reduce operational, power and cooling costs while
preserving existing Ethernet and Fibre Channel infrastructure.
NO.4 What are the benefits of migrating to an HP 3PAR StoreServ 7000?
A. Virtualizationof homogenous storage devices
B. increased efficiency through reduced capacity requirements
C. multi-tier storage availability in hyperscale enterprise platform
D. federated non-disruptive data mobility between third-party systems
Answer: D
HP HP0-J66인증 HP0-J66
Explanation:
HP 3PAR StoreServ 7000 Storageisthe only platform that offers the performance required to double
virtual machine (VM) density on your physical servers-guaranteed.
Store all of your data on a single system that supports advanced features such as storage federation
and automated tiering and enables you to start small and grow without disruption.
NO.5 A customer with multiple HP 3PAR P10000 Storage Systems needs to move data between the
arrays. They need to ensure that the migration will not disrupt their applications, users, or services.
Which storage method should the customer use to achieve this goal?
A. point-in-time copies
B. backups to disk
C. storage federation
D. deduplication
Answer: C
HP HP0-J66 HP0-J66 HP0-J66덤프 HP0-J66
Explanation:
Storage federation from HP enables the online non-disruptive movement of storage volumes
between arrays in a metro area. Unlike external storage virtualization appliances that add cost,
complexity and downtime, storage federation from HP creates a persistent pool of capacity using
native communication between system controllers.
NO.6 A customer is planning to migrate from an HP EVA to an HP 3PAR StoreServ 7000 Storage
System The customer uses disk groups on the EVA for fine-grained database management.
What can the customer use to achieve fine-grained database management on the HP 3PAR
StoreServ 7000?
A. logical volumes
B. common provisioning groups
C. disk groups
D. virtual volumes
Answer: B
HP덤프 HP0-J66 HP0-J66
Explanation:
Terminology comparison between EVA and HP 3PAR StoreServ EVA P6000:Disk Group HP 3PAR
StoreServ:Common Provisioning Group (CPG)
NO.7 A customer needs to migrate data to a new database environment. They need to make a
physical copy of their data that can be presented to the new environment with the highest level of
availability. Which form of replication should the customer use?
A. backups to disk
B. snapshots
C. clones
D. asynchronous replication
Answer: C
HP HP0-J66 HP0-J66최신덤프 HP0-J66
Explanation:
Incorrect: Not B:A storage snapshot is a set of reference markers, or pointers, to data stored on a
disk drive, on a tape, or in a storage area network (SAN). A snapshot is something like a detailed
table of contents, but it is treated by the computer as a complete data backup. Snapshots
streamline access to stored data and can speed up the process of data recovery. There are two main
types of storage snapshot, called the copy-on-write (or low-capacity) snapshot and the split-mirror
snapshot. Utilities are available that can automatically generate either type.
9. A customer needs to replicate data from a remote location to an HP StoreOnce B6200 Backup.
A. The HP D2D sizing tool should be usedto size link speed and understand concurrency restraints.
B. Concurrency control should be used if the replication isnot run at the same times as backups and
housekeeping jobs.
C. Separate replication jobs should be created for each datatype.
D. Backups and housekeeping jobs should berun in thereplication window.
Answer: A
HP인증 HP0-J66 HP0-J66 HP0-J66
Explanation:
The replication best practices that apply to HP StoreOnce D2D Backup Systems are
equally as valid for the HP B6200 StoreOnce Backup System.
Best practices include:
*Use the Sizing tool to size replication link speed and understand replication concurrency
restraints.
Reference; HP B6200 Backup System, Recommended Configuration Guidelines
10. In which HP rack is the factory Integration of an HP StoreServ 7000 supported?
A. HP 5642 rack
B. HP G3 rack
C. HP 10000 rack
D. HPV142 rack
Answer: C
HP HP0-J66 HP0-J66
Explanation:
Choose Racking Options The HP 3PAR StoreServ 7000 is compatible with most industry standard
4-post EIA 19 inch racks with square mounting holes, including the HP Intelligent Series Rack and
the HP 10000 G2 Series Rack. The HP 3PAR StoreServ 7000 can be factory configured and shipped in
a rack or shipped without a rack for field integration into an existing rack. The rack used for factory
integration is the HP Intelligent Series Rack.
NO.8 Your customer has an existing HP StoreServ 7400 with four controllers. The array has only SSD
drives installed. What should you consider when sizing a solution which includes Adaptive
Optimization?
A. Ensure that 3% of the capacity and 30% of the performance can be delivered by the SAS disks.
B. Include SAS 10/15K disks in the configuration.
C. Add SSDs or nearline disks to a single node pair.
D. Size the nearline tier for 30% of the performance requirement.
Answer: B
HP인증 HP0-J66 HP0-J66 HP0-J66 HP0-J66
Explanation:
Note:
*SAS stands for Serial Attached SCSI. Basically, a SAS drive utilizes the same form factor as a
SATA drive but has several high performance advantages. First of all, there's the platter speed.
While typical SATA drives operate at 7200RPM, a SAS drive operates at 10K or 15K. Although the
platter speed is double that of SATA, the MTBF (Mean Time Before Failure) remains at the
industry standard of 1.2 million hours.
*Make sure to define tier 0 to be on a higher performance level than tier 1, which in turn should be
higher performance than tier 2. For example, you may choose RAID 1 with SSDs for tier 0, RAID 5
with FC drives for tier 1 and RAID 6 with NL or SATA drives for tier 2.
*Best practices encourage you to begin your Adaptive Optimization configurations with your
application CPG starting with tier 1. For example, tier 1 could be CPG using your FC or SAS physical
disks. This allows you to add both higher and lower tier capabilities at a later date. If you don't have
higher or lower tier, you can add either or both at a later date by using a new CPG, such as tier 0
using SSDs or tier 2 using NL. Or, you could have CPG tiers with RAID 1 or RAID 5 and RAID 6. The
main point is that you should begin with middle CPG tier 1 when configuring Adaptive Optimization
with your application.
* Example: HP 3PAR Adaptive Optimization moved ~33 percent of the IOPS workload to the SSD
drives even though that involved moving only 1 percent of the space. Performance improved in two
ways: the 33 percent of the IOPS that were serviced by SSD drives got very good latencies (~2 ms),
and the latencies for the NL drives also improved (from ~40 ms to ~15 ms). Moreover, the
investment in the 16 SSD drives permitted them to add even more NL drives in the future, because
the SSD drives have both space and performance headroom remaining.
Reference;Adaptive Optimization for HP 3PAR StoreServ Storage
ITexamdump의 000-N38덤프의 VCE테스트프로그램과 P2090-010덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 C_TERP10_65시험에 대비한 고품질 덤프와 000-274시험 최신버전덤프를 제공해드립니다. 최고품질 000-540시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기