Microsoft 인증 70-502시험대비덤프를 찾고 계시다면ITExamDump가 제일 좋은 선택입니다.저희ITExamDump에서는 여라가지 IT자격증시험에 대비하여 모든 과목의 시험대비 자료를 발췌하였습니다. ITExamDump에서 시험대비덤프자료를 구입하시면 시험불합격시 덤프비용환불신청이 가능하고 덤프 1년 무료 업데이트서비스도 가능합니다. ITExamDump를 선택하시면 후회하지 않을것입니다.
ITExamDump는 저희 제품을 구매한 분들이 100%통과율을 보장해드리도록 최선을 다하고 있습니다. ITExamDump를 선택한것은 시험패스와 자격증취득을 예약한것과 같습니다. ITExamDump의 믿음직한 Microsoft인증 70-502덤프를 공부해보세요.
만약 아직도Microsoft 70-502시험패스를 위하여 고군분투하고 있다면 바로 우리 ITExamDump를 선택함으로 여러분의 고민을 날려버릴 수 잇습니다, 우리 ITExamDump에서는 최고의 최신의 덤프자료를 제공 합으로 여러분을 도와Microsoft 70-502인증자격증을 쉽게 취득할 수 있게 해드립니다. 만약Microsoft 70-502인증시험으로 한층 업그레이드된 자신을 만나고 싶다면 우리ITExamDump선택을 후회하지 않을 것입니다, 우리ITExamDump과의 만남으로 여러분은 한번에 아주 간편하게Microsoft 70-502시험을 패스하실 수 있으며,Microsoft 70-502자격증으로 완벽한 스펙을 쌓으실 수 있습니다,
시험 번호/코드: 70-502
시험 이름: Microsoft (TS: Microsoft .NET Framework 3.5 – Windows Presentation Foundation)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 128 문항
업데이트: 2013-09-29
한번에Microsoft인증70-502시험을 패스하고 싶으시다면 완전 페펙트한 준비가 필요합니다. 완벽한 관연 지식터득은 물론입니다. 우리ITExamDump의 자료들은 여러분의 이런 시험준비에 많은 도움이 될 것입니다.
70-502인증시험은Microsoft사의 인중시험입니다.Microsoft인증사의 시험을 패스한다면 it업계에서의 대우는 달라집니다. 때문에 점점 많은 분들이Microsoft인증70-502시험을 응시합니다.하지만 실질적으로70-502시험을 패스하시는 분들은 너무 적습니다.전분적인 지식을 터득하면서 완벽한 준비하고 응시하기에는 너무 많은 시간이 필요합니다.하지만 우리ITExamDump는 이러한 여러분의 시간을 절약해드립니다.
IT인증자격증을 취득하는 것은 IT업계에서 자신의 경쟁율을 높이는 유력한 수단입니다. 경쟁에서 밀리지 않으려면 자격증을 많이 취득하는 편이 안전합니다.하지만 IT자격증취득은 생각보다 많이 어려운 일입니다. Microsoft인증 70-502시험은 인기자격증을 취득하는데 필요한 시험과목입니다. ITExamDump는 여러분이 자격증을 취득하는 길에서의 없어서는 안될 동반자입니다. ITExamDump의Microsoft인증 70-502덤프로 자격증을 편하게 취득하는게 어떨가요?
70-502 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-502.html
NO.1 You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
The application defines a BrowserWindow class. Each instance of the BrowserWindow class allows the
user to browse a Web site in a separate window. When a new browser window is opened, the user is
redirected to a predefined URL.
You write the following code segment.
01 private void OpenNewWindow(object sender, RoutedEventArgs e)
02 {
03 Thread newWindowThread = new Thread(new
ThreadStart(NewThreadProc));
04
05 newWindowThread.Start();
06 }
07 private void NewThreadProc()
08 {
09 10 ?}
You need to ensure that the following requirements are met:
?The main window of the application is not blocked when an additional browser window is created.
?The application completes execution when the main window of the application is closed.
What should you do?
A. Insert the following code segment at line 04.
newWindowThread.SetApartmentState(ApartmentState.STA);
newWindowThread.IsBackground = true;
Insert the following code segment at line 09.
BrowserWindow newWindow = new BrowserWindow();
newWindow.Show();
Application app = new Application();
app.Run(newWindow);
B. Insert the following code segment at line 04.
newWindowThread.IsBackground = true;
Insert the following code segment at line 09.
newWindowThread.SetApartmentState(ApartmentState.STA);
BrowserWindow newWindow = new BrowserWindow();
newWindow.Show();
Application app = new Application();
app.Run(newWindow);
C. Insert the following code segment at line 04.
newWindowThread.SetApartmentState(ApartmentState.STA);
newWindowThread.IsBackground = false;
Insert the following code segment at line 09.
BrowserWindow newWindow = new BrowserWindow();
System.Windows.Threading.Dispatcher.Run();
newWindow.Show();
D. Insert the following code segment at line 04.
newWindowThread.SetApartmentState(ApartmentState.STA);
newWindowThread.IsBackground = true;
Insert the following code segment at line 09.
BrowserWindow newWindow = new BrowserWindow();
newWindow.Show();
System.Windows.Threading.Dispatcher.Run();
Answer: D
Microsoft기출문제 70-502 70-502 70-502 dumps
NO.2 5.
You add a CommandBinding element to the Window element. The command has a keyboard gesture
CTRL+H. The Window contains the following MenuItem control.
<MenuItem Header="Highlight Content"
Command="local:CustomCommands.Highlight" />
You need to ensure that the MenuItem control is disabled and the command is not executable when the
focus shifts to a TextBox control that does not contain any text.
What should you do?
A. Set the IsEnabled property for the MenuItem control in the GotFocus event handler for the TextBox
controls.
B. Set the CanExecute property of the command to Highlight_CanExecute.
Add the following method to the code-behind file for the window.
Private Sub Highlight_CanExecute(ByVal sender As Object, _
ByVal e As CanExecuteRoutedEventArgs)
Dim txtBox As TextBox = CType(sender, TextBox)
e.CanExecute = (txtBox.Text.Length > 0)
End Sub
C. Set the CanExecute property of the command to Highlight_CanExecute.
Add the following method to the code-behind file for the window.
Private Sub Highlight_CanExecute(ByVal sender As Object, _
ByVal e As CanExecuteRoutedEventArgs)
Dim txtBox As TextBox
txtBox = CType(e.Source, TextBox)
e.CanExecute = (txtBox.Text.Length > 0)
End Sub
D. Set the CanExecute property of the command to Highlight_CanExecute.
Add the following method to the code-behind file for the window.
Private Sub Highlight_CanExecute(ByVal sender As Object, _
?ByVal e As CanExecuteRoutedEventArgs)
Dim Menu As MenuItem = CType(e.Source, MenuItem)
Dim txtBox As TextBox = CType(Menu.CommandTarget, TextBox)
Menu.IsEnabled = (txtBox.Text.Length > 0)
End Sub
Answer: C
Microsoft 70-502 70-502 70-502최신덤프
3. You create a Windows Presentation Foundation application by using Microsoft .NET Framework 3.5.
The application is named EnterpriseApplication.exe.
You add the WindowSize parameter and the WindowPosition parameter to the Settings.settings file by
using the designer at the User Scope Level. The dimensions and position of the window are read from the
user configuration file.
The application must retain the original window size and position for each user who executes the
application.
You need to ensure that the following requirements are met:
?The window dimensions for each user are saved in the user configuration file.
?The user settings persist when a user exits the application.
Which configuration setting should you use?
A. private void OnClosing(object sender,
System.ComponentModel.CancelEventArgs e){
Settings.Default.WindowPosition = new Point (this.Left,
this.Top);
Settings.Default.WindowSize = new Size (this.Width,
this.Height);
Settings.Default.Save();
B. private void OnClosing(object sender,
System.ComponentModel.CancelEventArgs e){
RegistryKey appKey =
Registry.CurrentUser.CreateSubKey("Software\\EnterpriseApplication");
RegistryKey settingsKey = appKey.CreateSubKey("WindowSettings");
RegistryKey windowPositionKey =
settingsKey.CreateSubKey("WindowPosition");
RegistryKey windowSizeKey = settingsKey.CreateSubKey("WindowSize");
windowPositionKey.SetValue("X", this.Left);
windowPositionKey.SetValue("Y", this.Top);
windowSizeKey.SetValue("Width", this.Width);
windowSizeKey.SetValue("Height", this.Height);
C. private void OnClosing(object sender,
System.ComponentModel.CancelEventArgs e){
XmlDocument doc = new XmlDocument();
doc.Load("EnterpriseApplication.exe.config");
XmlNode nodePosition =
doc.SelectSingleNode("//setting[@name=\'WindowPosition\']");
nodePosition.ChildNodes[0].InnerText = String.Format("{0},{1}",
this.Left, this.Top);
XmlNode nodeSize =
doc.SelectSingleNode("//setting[@name=\'WindowSize\']");
nodeSize.ChildNodes[0].InnerText = String.Format("{0},{1}",
this.Width, this.Height);
doc.Save("UserConfigDistractor2.exe.config");
D. private void Window_Closing(object sender,
System.ComponentModel.CancelEventArgs e){
StreamWriter sw =
new StreamWriter("EnterpriseApplication.exe.config", true);
sw.WriteLine("<EnterpriseApplication.Properties.Settings>");
sw.WriteLine("<setting name=
\"WindowSize\" serializeAs=\"String\">");
sw.WriteLine(String.Format("<value>{0},{1}</value>",
this.Width, this.Height));
sw.WriteLine("</setting>");
sw.WriteLine("<setting name=
\"WindowPosition\" serializeAs=\"String\">");
sw.WriteLine(String.Format("<value>{0},{1}</value>", this.Left,
this.Top));
sw.WriteLine("</setting>");
sw.WriteLine("</UserConfigProblem.Properties.Settings>");
sw.Close();
Answer: A
Microsoft자료 70-502최신덤프 70-502 70-502
NO.3 You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
The application defines a BrowserWindow class. Each instance of the BrowserWindow class allows the
user to browse a Web site in a separate window. When a new browser window is opened, the user is
redirected to a predefined URL.
You write the following code segment.
01 Private Sub OpenNewWindow(ByVal sender As Object, _
02 ?ByVal e As RoutedEventArgs)
03 Dim newWindowThread As New Thread(New _
04 ThreadStart(AddressOf NewThreadProc))
05
06 newWindowThread.Start()
07 End Sub
08 Private Sub NewThreadProc()
09 10 End Sub
You need to ensure that the following requirements are met:
?The main window of the application is not blocked when an additional browser window is created.
?The application completes execution when the main window of the application is closed.
What should you do?
A. Insert the following code segment at line 05.
newWindowThread.SetApartmentState(ApartmentState.STA)
newWindowThread.IsBackground = True
Insert the following code segment at line 09.
Dim newWindow As New BrowserWindow()
newWindow.Show()
Dim app As New Application()
app.Run(newWindow)
B. Insert the following code segment at line 05.
newWindowThread.IsBackground = True
Insert the following code segment at line 09.
newWindowThread.SetApartmentState(ApartmentState.STA)
Dim newWindow As New BrowserWindow()
newWindow.Show()
Dim app As New Application()
app.Run(newWindow)
C. Insert the following code segment at line 05.
newWindowThread.SetApartmentState(ApartmentState.STA)
newWindowThread.IsBackground = False
Insert the following code segment at line 09.
Dim newWindow As New BrowserWindow()
System.Windows.Threading.Dispatcher.Run()
newWindow.Show()
D. Insert the following code segment at line 05.
newWindowThread.SetApartmentState(ApartmentState.STA)
newWindowThread.IsBackground = True
Insert the following code segment at line 09.
Dim newWindow As New BrowserWindow()
newWindow.Show()
System.Windows.Threading.Dispatcher.Run()
Answer: D 7. You are creating a Windows Presentation Foundation application by using Microsoft .NET
Framework 3.5.
The application uses several asynchronous operations to calculate data that is displayed to the user. An
operation named tommorowsWeather performs calculations that will be used by other operations.
You need to ensure that tommorowsWeather runs at the highest possible priority.
Which code segment should you use?
A. tomorrowsWeather.Dispatcher.BeginInvoke(
System.Windows.Threading.DispatcherPriority.Normal,
new OneArgDelegate(UpdateUserInterface),
weather);
B. tomorrowsWeather.Dispatcher.BeginInvoke(
System.Windows.Threading.DispatcherPriority.DataBind,
new OneArgDelegate(UpdateUserInterface),
weather);
C. tomorrowsWeather.Dispatcher.BeginInvoke(
System.Windows.Threading.DispatcherPriority.Send,
new OneArgDelegate(UpdateUserInterface),
weather);
D. tomorrowsWeather.Dispatcher.BeginInvoke(
System.Windows.Threading.DispatcherPriority.Render,
new OneArgDelegate(UpdateUserInterface),
weather);
Answer: C 8. You are creating a Windows Presentation Foundation application by using Microsoft .NET
Framework 3.5.
The application uses several asynchronous operations to calculate data that is displayed to the user. An
operation named tommorowsWeather performs calculations that will be used by other operations.
You need to ensure that tommorowsWeather runs at the highest possible priority.
Which code segment should you use?
A. tomorrowsWeather.Dispatcher.BeginInvoke( _
System.Windows.Threading.DispatcherPriority.Normal, _
New OneArgDelegate(AddressOf UpdateUserInterface), weather)
B. tomorrowsWeather.Dispatcher.BeginInvoke( _
?System.Windows.Threading.DispatcherPriority.DataBind, _
?New OneArgDelegate(AddressOf UpdateUserInterface), weather)
C. tomorrowsWeather.Dispatcher.BeginInvoke( _
System.Windows.Threading.DispatcherPriority.Send, _
New OneArgDelegate(AddressOf UpdateUserInterface), weather)
D. tomorrowsWeather.Dispatcher.BeginInvoke( _
System.Windows.Threading.DispatcherPriority.Render, _
New OneArgDelegate(AddressOf UpdateUserInterface), weather)
Answer: C 9. You are creating a Windows Presentation Foundation application by using Microsoft .NET
Framework 3.5.
You create a window for the application.
You need to ensure that the following requirements are met:
?An array of strings is displayed by using a ListBox control in a two-column format.
?The data in the ListBox control flows from left to right and from top to bottom.
What should you do?
A. Use a ListBox control defined in the following manner.
<ListBox Name="myList">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<UniformGrid Columns="2"/>
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
Use the following C# code to associate the array of strings to the ListBox control.
myList.ItemsSource = arrayOfString;
B. Use a ListBox control defined in the following manner.
<ListBox Name="myList">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
Use the following C# code to associate the array of strings to the ListBox control.
myList.ItemsSource = arrayOfString;
C. Use a ListBox control defined in the following manner.
<ListBox Name="myList">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<WrapPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
Use the following C# code to associate the array of strings to the ListBox control.
myListView.ItemsSource = arrayOfString;
D. Use a ListBox control defined in the following manner.
<ListBox Name="myList">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition />
<ColumnDefinition />
</Grid.ColumnDefinitions>
</Grid>
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
Use the following C# code to associate the array of strings to the ListBox control.
myList.ItemsSource = arrayOfString;
Answer: A
Microsoft기출문제 70-502덤프 70-502시험문제 70-502
10. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
You create a window for the application.
You need to ensure that the following requirements are met:
?An array of strings is displayed by using a ListBox control in a two-column format.
?The data in the ListBox control flows from left to right and from top to bottom.
What should you do?
A. Use a ListBox control defined in the following manner.
<ListBox Name="myList">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<UniformGrid Columns="2"/>
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
Use the following VB.net code to associate the array of strings to the ListBox control.
myList.ItemsSource = arrayOfString
B. Use a ListBox control defined in the following manner.
<ListBox Name="myList">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
Use the following vb.net code to associate the array of strings to the ListBox control.
myList.ItemsSource = arrayOfString
C. Use a ListBox control defined in the following manner.
<ListBox Name="myList">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<WrapPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
Use the following vb.net code to associate the array of strings to the ListBox control.
myListView.ItemsSource = arrayOfString
D. Use a ListBox control defined in the following manner.
<ListBox Name="myList">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition />
<ColumnDefinition />
</Grid.ColumnDefinitions>
</Grid>
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
Use the following vb.net code to associate the array of strings to the ListBox control.
myList.ItemsSource = arrayOfString
Answer: A
Microsoft dumps 70-502덤프 70-502최신덤프 70-502
11. You create a form by using Windows Presentation Foundation and Microsoft .NET Framework 3.5.
The form contains a status bar.
You plan to add a ProgressBar control to the status bar.
You need to ensure that the ProgressBar control displays the progress of a task for which you cannot
predict the completion time.
Which code segment should you use?
A. progbar.IsIndeterminate = true;
B. progbar.IsIndeterminate = false;
C. progbar.HasAnimatedProperties = true;
D. progbar.HasAnimatedProperties = false;
Answer: A
Microsoft 70-502 dump 70-502인증 70-502 70-502기출문제
12. You create a form by using Windows Presentation Foundation and Microsoft .NET Framework 3.5.
The form contains a status bar.
You plan to add a ProgressBar control to the status bar.
You need to ensure that the ProgressBar control displays the progress of a task for which you cannot
predict the completion time.
Which code segment should you use?
A. progbar.IsIndeterminate = True
B. progbar.IsIndeterminate = False
C. progbar.HasAnimatedProperties = True
D. progbar.HasAnimatedProperties = False
Answer: A
Microsoft 70-502시험문제 70-502덤프 70-502 70-502최신덤프 70-502
13. You are converting a Windows Forms application to a Windows Presentation Foundation (WPF)
application. You use Microsoft .NET Framework 3.5 to create the WPF application.
The WPF application will reuse 30 forms of the Windows Forms application.
The WPF application contains the following class definition.
public class OwnerWindow :
System.Windows.Forms.IWin32Window
private IntPtr handle;
public IntPtr Handle
get { return handle; }
set { handle=value; }
}
}
You write the following code segment in the WPF application. (Line numbers are included for reference
only.)
01 public DialogResult LaunchWindowsFormsDialog(
02 ?Form dialog, Window wpfParent)
03 {
04 WindowInteropHelper helper=new
05 ?WindowInteropHelper(wpfParent);
06 OwnerWindow owner=new OwnerWindow();
07
08 }
You need to ensure that the application can launch the reusable forms as modal dialogs.
Which code segment should you insert at line 07?
A.owner.Handle = helper.Owner;
return dialog.ShowDialog(owner);
B. owner.Handle = helper.Handle;
return dialog.ShowDialog(owner);
C. owner.Handle = helper.Owner;
bool? result = wpfParent.ShowDialog();
if (result.HasValue)
return result.Value ? System.Windows.Forms.DialogResult.OK :
System.Windows.Forms.DialogResult.Cancel;
else
return System.Windows.Forms.DialogResult.Cancel;
D. owner.Handle = helper.Handle;
bool? result = wpfParent.ShowDialog();
if (result.HasValue)
return result.Value ? System.Windows.Forms.DialogResult.OK :
System.Windows.Forms.DialogResult.Cancel;
else
return System.Windows.Forms.DialogResult.Cancel;
Answer: B
Microsoft 70-502 70-502 70-502 dump
14. You are converting a Windows Forms application to a Windows Presentation Foundation (WPF)
application. You use Microsoft .NET Framework 3.5 to create the WPF application.
The WPF application will reuse 30 forms of the Windows Forms application.
The WPF application contains the following class definition.
Public Class OwnerWindow
Implements System.Windows.Forms.IWin32Window
Private handle_Renamed As IntPtr
Public Property Handle() As IntPtr _
Implements System.Windows.Forms.IWin32Window.Handle
Get
Return handle_Renamed
End Get
Set(ByVal value As IntPtr)
handle_Renamed = value
End Set
End Property
End Class
You write the following code segment in the WPF application. (Line numbers are included for reference
only.)
01 Public Function LaunchWindowsFormsDialog(ByVal dialog As _
02 ?System.Windows.Forms.Form, ByVal wpfParent As Window) As _
03 ?System.Windows.Forms.DialogResult
04 Dim helper As New
05 System.Windows.Interop.WindowInteropHelper(wpfParent)
07 Dim owner As New OwnerWindow()
08
09 End Function
You need to ensure that the application can launch the reusable forms as modal dialogs.
Which code segment should you insert at line 08?
Aowner.Handle = helper.Owner
Dim db As New System.Windows.Forms.DialogResult()
Return db
B. owner.Handle = helper.Owner
Return dialog.ShowDialog(owner)
C. owner.Handle = helper.Owner
Dim result As Nullable(Of Boolean) = wpfParent.ShowDialog()
If result.HasValue Then
eturn If(result.Value, System.Windows.Forms.DialogResult.OK, _
?System.Windows.Forms.DialogResult.Cancel)
Else
Return System.Windows.Forms.DialogResult.Cancel
End If
D. owner.Handle = helper.Handle
Dim result As Nullable(Of Boolean) = wpfParent.ShowDialog()
If result.HasValue Then
Return If(result.Value, System.Windows.Forms.DialogResult.OK, _
?System.Windows.Forms.DialogResult.Cancel)
Else
Return System.Windows.Forms.DialogResult.Cancel
End If
Answer: B 15. You are creating a Windows Presentation Foundation (WPF) application by using
Microsoft .NET Framework 3.5.
The WPF application has a Grid control named rootGrid.
You write the following XAML code fragment.
<Window x:Class="MCP.HostingWinFormsControls"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/
presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="HostingWinFormsControls"
Loaded="Window_Loaded">
<Grid x:Name="rootGrid">
</Grid>
</Window>
You need to ensure that each time the WPF window opens, a Windows Forms control named
MyCustomFormsControl is added to rootGrid.
Which code segment should you use?
A.private void Window_Loaded(object sender, RoutedEventArgs e)
WindowsFormsHost host = new WindowsFormsHost();
MyCustomFormsControl formsControl = new MyCustomFormsControl();
host.Child = formsControl;
rootGrid.Children.Add(host);
B. private void Window_Loaded(object sender, RoutedEventArgs e)
ElementHost host = new ElementHost();
MyCustomFormsControl formsControl=new MyCustomFormsControl();
host.Child=formsControl;
rootGrid.Children.Add(host);
C. private void Window_Loaded(object sender, RoutedEventArgs e)
MyCustomFormsControl formsControl=new MyCustomFormsControl();
formsControl.CreateControl();
HwndSource source = HwndSource.FromHwnd(formsControl.Handle);
UIElement formsElement = source.RootVisual as UIElement;
rootGrid.Children.Add(formsElement);
D. private void Window_Loaded(object sender, RoutedEventArgs e)
MyCustomFormsControl formsControl=new MyCustomFormsControl();
formsControl.CreateControl();
HwndTarget target = new HwndTarget(formsControl.Handle);
UIElement formsElement = target.RootVisual as UIElement;
rootGrid.Children.Add(formsElement);
Answer: A
Microsoft 70-502 70-502 dumps
16.You are creating a Windows Presentation Foundation (WPF) application by using Microsoft .NET
Framework 3.5.
The WPF application has a Grid control named rootGrid.
You write the following XAML code fragment.
<Window x:Class="MCP.HostingWinFormsControls"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/
presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="HostingWinFormsControls"
Loaded="Window_Loaded">
<Grid x:Name="rootGrid">
</Grid>
</Window>
You need to ensure that each time the WPF window opens, a Windows Forms control named
MyCustomFormsControl is added to rootGrid.
Which code segment should you use?
APrivate Sub Window_Loaded(ByVal sender As Object, ByVal e As _
RoutedEventArgs)
Dim host As New WindowsFormsHost()
Dim formsControl As New MyCustomFormsControl()
host.Child = formsControl;
rootGrid.Children.Add(host);
End Sub
B. Private Sub Window_Loaded(ByVal sender As Object, ByVal e As _
RoutedEventArgs)
Dim host As New ElementHost()
Dim formsControl As New MyCustomFormsControl()
host.Child = formsControl;
rootGrid.Children.Add(host);
End Sub
C. Private Sub Window_Loaded(ByVal sender As Object, ByVal e As _
RoutedEventArgs)
Dim formsControl As New MyCustomFormsControl()
formsControl.CreateControl()
Dim target As New HwndTarget(formsControl.Handle)
Dim formsElement As UIElement = TryCast(target.RootVisual, _
UIElement)
rootGrid.Children.Add(formsElement)
End Sub
D. Private Sub Window_Loaded(ByVal sender As Object, ByVal e As _
RoutedEventArgs)
Dim formsControl As New MyCustomFormsControl()
formsControl.CreateControl()
Dim source As HwndSource = HwndSource.FromHwnd(formsControl.Handle)
Dim formsElement As UIElement = TryCast(source.RootVisual, _
UIElement)
rootGrid.Children.Add(formsElement)
End Sub
Answer: A
Microsoft 70-502 pdf 70-502
17. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
You include functionality in the application to troubleshoot the window behavior.
You need to display a list of UI elements at a position in the window that is decided by the mouse click.
You also need to ensure that the list of elements is displayed in a message box.
Which code segment should you include in the code-behind file?
Astring controlsToDisplay = string.Empty;
private void Window_MouseDown(object sender, MouseButtonEventArgs e) {
controlsToDisplay = ((UIElement)sender).ToString();
MessageBox.Show(controlsToDisplay);
B. string controlsToDisplay = string.Empty;
private void Window_MouseDown(object sender, MouseButtonEventArgs e) {
for (int i = 0; i < this.VisualChildrenCount; i++) {
controlsToDisplay + = this.GetVisualChild(i).ToString() + "\r\n";
MessageBox.Show(controlsToDisplay);
C. string controlsToDisplay = string.Empty;
private void Window_MouseDown (object sender, MouseButtonEventArgs e)
Visual myVisual;
for (int i = 0; i < VisualTreeHelper.GetChildrenCount(sender as
Visual); i++) {
myVisual = (Visual)VisualTreeHelper.GetChild(sender as Visual, i);
controlsToDisplay += myVisual.GetType().ToString() + "\r\n";
MessageBox.Show(controlsToDisplay);
D. string controlsToDisplay = string.Empty;
private void Window_MouseDown(object sender, MouseButtonEventArgs e) {
Point pt = e.GetPosition(this);
VisualTreeHelper.HitTest(this, null, new
HitTestResultCallback(HitTestCallback), new
PointHitTestParameters(pt));
MessageBox.Show(controlsToDisplay);
private HitTestResultBehavior HitTestCallback(HitTestResult result) {
controlsToDisplay += result.VisualHit.GetType().ToString() + "\r\n";
return HitTestResultBehavior.Continue;
Answer: D
Microsoft 70-502자격증 70-502 70-502자격증
18. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
You include functionality in the application to troubleshoot the window behavior.
You need to display a list of UI elements at a position in the window that is decided by the mouse click.
You also need to ensure that the list of elements is displayed in a message box.
Which code segment should you include in the code-behind file?
A.Dim controlsToDisplay As String = String.Empty
Private Sub Window_MouseDown(ByVal sender As Object, _
ByVal e As MouseButtonEventArgs)
controlsToDisplay = CType(sender, UIElement).ToString()
MessageBox.Show(controlsToDisplay)
End Sub
B. Dim controlsToDisplay As String = String.Empty
Private Sub Window_MouseDown(ByVal sender As Object, _
ByVal e As MouseButtonEventArgs)
For i = 0 To VisualChildrenCount - 1
controlsToDisplay += GetVisualChild(i).ToString() + "\r\n"
Next
MessageBox.Show(controlsToDisplay)
End Sub
C. Dim controlsToDisplay As String = String.Empty
Private Sub Window_MouseDown(ByVal sender As Object, _
ByVal e As MouseButtonEventArgs)
Dim myVisual As Visual()
For i = 0 To VisualTreeHelper.GetChildrenCount(CType(sender, _
Visual)) - 1
myVisual(i) = CType(VisualTreeHelper.GetChild(CType(sender, _
Visual), i), Visual)
controlsToDisplay += myVisual.GetType().ToString() + "\r\n"
Next
MessageBox.Show(controlsToDisplay)
End Sub
D. Dim controlsToDisplay As String = String.Empty
Private Sub Window_MouseDown(ByVal sender As Object, _
ByVal e As MouseButtonEventArgs)
Dim pt As Point = e.GetPosition(Me)
VisualTreeHelper.HitTest(Me, Nothing, _
New HitTestResultCallback(AddressOf HitTestCallback), _
New PointHitTestParameters(pt))
MessageBox.Show(controlsToDisplay)
End Sub
Private Function HitTestCallback(ByVal result As HitTestResult) As _
HitTestResultBehavior
controlsToDisplay += result.VisualHit.GetType().ToString() + "\r\n"
Return HitTestResultBehavior.Continue
End Function
Answer: D
Microsoft덤프 70-502 70-502 70-502기출문제 70-502
19. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
You write the following code segment (Line numbers are included for reference only).
01 Dim content As Object
02 Dim fileName As String = "theFile"
03 Using xamlFile As New FileStream(fileName & ".xaml", _
04 FileMode.Open, FileAccess.Read)
06 content = TryCast(XamlReader.Load(xamlFile), Object)
07 End Using
08 Using container As Package = Package.Open(fileName & ".xps", _
09 FileMode.Create)1011 End Using
You need to ensure that the following requirements are met:
The application converts an existing flow document into an XPS document.
The XPS document is generated by using the flow document format.
The XPS document has the minimum possible size.
Which code segment should you insert at line 10?
A
Using xpsDoc As New XpsDocument(container, _
CompressionOption.SuperFast)
Dim rsm As XpsSerializationManager = New _
System.Windows.Xps.XpsSerializationManager(New _
XpsPackagingPolicy(xpsDoc), False)
rsm.SaveAsXaml(paginator)
End Using
B. Using xpsDoc As New XpsDocument(container, _
CompressionOption.SuperFast)
Dim rsm As New XpsSerializationManager(New _
XpsPackagingPolicy(xpsDoc), False)
rsm.Commit()
End Using
C. Using xpsDoc As New XpsDocument(container, _
CompressionOption.Maximum)
Dim rsm As New XpsSerializationManager(New _
XpsPackagingPolicy(xpsDoc), False)
Dim paginator As DocumentPaginator = (CType(content, _
IDocumentPaginatorSource)).DocumentPaginator
rsm.SaveAsXaml(paginator)
End Using
D. Using xpsDoc As New XpsDocument(container, _
CompressionOption.SuperFast)
Dim rsm As New XpsSerializationManager(New _
XpsPackagingPolicy(xpsDoc), False)
Dim paginator As DocumentPaginator = (CType(content, _
IDocumentPaginatorSource)).DocumentPaginator
rsm.SaveAsXaml(paginator)
End Using
Answer: C
Microsoft 70-502 70-502 pdf
20. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
You write the following code segment (Line numbers are included for reference only).
01 Dim content As Object
02 Dim fileName As String = "theFile"
03 Using xamlFile As New FileStream(fileName & ".xaml", _
04 ?FileMode.Open, FileAccess.Read)
06 content = TryCast(XamlReader.Load(xamlFile), Object)
07 End Using
08 Using container As Package = Package.Open(fileName & ".xps", _
09 ?FileMode.Create)10 11 End Using
You need to ensure that the following requirements are met:
The application converts an existing flow document into an XPS document.
The XPS document is generated by using the flow document format.
The XPS document has the minimum possible size.
Which code segment should you insert at line 10?
A.Using xpsDoc As New XpsDocument(container, _
CompressionOption.SuperFast)
Dim rsm As XpsSerializationManager = New _
System.Windows.Xps.XpsSerializationManager(New _
XpsPackagingPolicy(xpsDoc), False)
rsm.SaveAsXaml(paginator)
End Using
B. Using xpsDoc As New XpsDocument(container, _
CompressionOption.SuperFast)
Dim rsm As New XpsSerializationManager(New _
XpsPackagingPolicy(xpsDoc), False)
rsm.Commit()
End Using
C. Using xpsDoc As New XpsDocument(container, _
CompressionOption.Maximum)
Dim rsm As New XpsSerializationManager(New _
XpsPackagingPolicy(xpsDoc), False)
Dim paginator As DocumentPaginator = (CType(content, _
IDocumentPaginatorSource)).DocumentPaginator
rsm.SaveAsXaml(paginator)
End Using
D. Using xpsDoc As New XpsDocument(container, _
CompressionOption.SuperFast)
Dim rsm As New XpsSerializationManager(New _
XpsPackagingPolicy(xpsDoc), False)
Dim paginator As DocumentPaginator = (CType(content, _
IDocumentPaginatorSource)).DocumentPaginator
rsm.SaveAsXaml(paginator)
End Using
Answer: C
Microsoft인증 70-502 dump 70-502자격증 70-502
21. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
The application displays documents by using an instance of the FlowDocumentPageViewer class. The
instance is named fdpv. Users can highlight and annotate the content of the documents.
You need to ensure that annotations made to a document are saved and rendered when the document is
displayed again.
Which code segment should you use?
A.protected void OnTextInput(object sender, RoutedEventArgs e) {
AnnotationService service = AnnotationService.GetService(fdpv);
if (service == null) {
AnnotationStream = new FileStream("annotations.xml",
FileMode.Open, FileAccess.ReadWrite);
service = new AnnotationService(fdpv);
AnnotationStore store = new XmlStreamStore(AnnotationStream);
service.Enable(store);
}
}
private void OnClosing(object sender,
System.ComponentModel.CancelEventArgs e) {
AnnotationService service = AnnotationService.GetService(fdpv);
if (service != null && service.IsEnabled) {
service.Store.Flush();
service.Disable();
AnnotationStream.Close();
}
}
B. protected void OnLoaded(object sender, RoutedEventArgs e) {
AnnotationService service = AnnotationService.GetService(fdpv);
if (service == null) {
AnnotationStream = new FileStream("annotations.xml",
FileMode.Open, FileAccess.ReadWrite);
service = new AnnotationService(fdpv);
}
}
private void OnClosing(object sender,
?System.ComponentModel.CancelEventArgs e) {
AnnotationService service = AnnotationService.GetService(fdpv);
if (service != null && service.IsEnabled) {
service.Store.Flush();
service.Disable();
AnnotationStream.Close();
}
}
C. protected void OnLoaded(object sender, RoutedEventArgs e) {
AnnotationService service = AnnotationService.GetService(fdpv);
if (service == null) {
AnnotationStream = new FileStream("annotations.xml",
FileMode.Open, FileAccess.ReadWrite);
service = new AnnotationService(fdpv);
AnnotationStore store = new XmlStreamStore(AnnotationStream);
service.Enable(store);
}
}
private void OnClosing(object sender,
System.ComponentModel.CancelEventArgs e) {
AnnotationService service = AnnotationService.GetService(fdpv);
if (service != null && service.IsEnabled) {
service.Store.Flush();
service.Disable();
AnnotationStream.Close();
}
}
D. protected void OnLoaded(object sender, RoutedEventArgs e) {
AnnotationService service = AnnotationService.GetService(fdpv);
if (service == null) {
AnnotationStream = new FileStream("annotations.xml",
FileMode.Open, FileAccess.ReadWrite);
service = new AnnotationService(fdpv);
AnnotationStore store = new XmlStreamStore(AnnotationStream);
service.Enable(store);
}
}
private void OnClosing(object sender,
System.ComponentModel.CancelEventArgs e) {
AnnotationService service = AnnotationService.GetService(fdpv);
if (service != null && service.IsEnabled) {
service.Disable();
AnnotationStream.Close();
}
}
Answer: C
Microsoft dumps 70-502 70-502자료
22. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
The application will display documents by using an instance of the FlowDocumentPageViewer class. The
instance is named fdpv. Users can highlight and annotate the content of the documents.
You need to ensure that annotations made to a document are saved and rendered when the document is
displayed again.
Which code segment should you use?
A. Protected Sub OnTextInput(ByVal sender As Object, _
ByVal e As RoutedEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If service Is Nothing Then
AnnotationStream = New FileStream("annotations.xml", _
FileMode.Open, FileAccess.ReadWrite)
service = New AnnotationService(fdpv)
Dim store As AnnotationStore = _
New XmlStreamStore(AnnotationStream)
service.Enable(store)
End If
End Sub
Private Sub OnClosing(ByVal sender As Object, _
ByVal e As System.ComponentModel.CancelEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If Not service Is Nothing AndAlso service.IsEnabled Then
service.Store.Flush()
srvice.Disable()
AnnotationStream.Close()
End If
End Sub
B. Protected Sub OnLoaded(ByVal sender As Object, _
ByVal e As RoutedEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If service Is Nothing Then
AnnotationStream = New FileStream("annotations.xml", _
FileMode.Open, FileAccess.ReadWrite)
service = New AnnotationService(fdpv)
End If
End Sub
Private Sub OnClosing(ByVal sender As Object, _
ByVal e As System.ComponentModel.CancelEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If Not service Is Nothing AndAlso service.IsEnabled Then
service.Store.Flush()
service.Disable()
AnnotationStream.Close()
End If
End Sub
C. Protected Sub OnLoaded(ByVal sender As Object, _
ByVal e As RoutedEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If service Is Nothing Then
AnnotationStream = New FileStream("annotations.xml", _
FileMode.Open, FileAccess.ReadWrite)
service = New AnnotationService(fdpv)
Dim store As AnnotationStore = New _
XmlStreamStore(AnnotationStream)
service.Enable(store)
End If
End Sub
Private Sub OnClosing(ByVal sender As Object, _
ByVal e As System.ComponentModel.CancelEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If Not service Is Nothing AndAlso service.IsEnabled Then
service.Store.Flush()
service.Disable()
AnnotationStream.Close()
End If
End Sub
D. Protected Sub OnLoaded(ByVal sender As Object, _
ByVal e As RoutedEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If service Is Nothing Then
AnnotationStream = New FileStream("annotations.xml", _
FileMode.Open, FileAccess.ReadWrite)
service = New AnnotationService(fdpv)
Dim store As AnnotationStore = New _
XmlStreamStore(AnnotationStream)
service.Enable(store)
End If
End Sub
Private Sub OnClosing(ByVal sender As Object, _
ByVal e As System.ComponentModel.CancelEventArgs)
Dim service As AnnotationService = _
AnnotationService.GetService(fdpv)
If Not service Is Nothing AndAlso service.IsEnabled Then
service.Disable()
AnnotationStream.Close()
End If
End Sub
Answer: C
Microsoft 70-502기출문제 70-502 70-502시험문제
23. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
You plan to use the application to preview video files.
You write the following XAML code fragment.
01 <Window
01 x:Class="myClass" xmlns=
01 "http://schemas.microsoft.com/winfx/2006/xaml/presentation"
01 xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
01 Title="myWindow" Height="300" Width="300">
02 <StackPanel Background="Black">
03
04 <StackPanel HorizontalAlignment="Center"
04 Orientation="Horizontal">
05 ?<Button Name="btnPlay" Margin="10" Content="Play" />
06 </StackPanel>
07
08 </StackPanel>
09 </Window>
You need to ensure that the application plays only the first 10 seconds of a video that you want to preview.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Insert the following XAML fragment at line 03.
<MediaElement Name="myMediaElement" Stretch="Fill" />
B. Insert the following XAML fragment at line 03.
<MediaElement Name="myMediaElement"
Source="MediaFileSelected.wmv" Stretch="Fill" />
C. Create the following method in the code-behind file.
public void PlayMedia(object sender, RoutedEventArgs args) {
myMediaElement.Play();
}
D. Insert the following XAML fragment at line 07.
<StackPanel.Triggers>
<EventTrigger RoutedEvent="Button.Click" SourceName="btnPlay">
<EventTrigger.Actions>
<BeginStoryboard Name= "myBegin">
<Storyboard SlipBehavior="Slip">
<MediaTimeline Source="MediaFileSelected.wmv"
Storyboard.TargetName="myMediaElement"
BeginTime="0:0:0" Duration="0:0:10" />
</Storyboard>
</BeginStoryboard>
</EventTrigger.Actions>
</EventTrigger>
</StackPanel.Triggers>
E. Insert the following XAML fragment at line 07.
<StackPanel.Triggers>
<EventTrigger RoutedEvent="Button.Click" SourceName="btnPlay">
<EventTrigger.Actions>
<BeginStoryboard Name= "myBegin">
<Storyboard SlipBehavior="Slip">
<MediaTimeline
Storyboard.TargetName="myMediaElement"
BeginTime="0:0:0" Duration="0:0:10" />
</Storyboard>
</BeginStoryboard>
</EventTrigger.Actions>
</EventTrigger>
</StackPanel.Triggers>
Answer: A AND D
Microsoft 70-502 70-502최신덤프 70-502
24. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
You plan to use the application to preview video files.
You write the following XAML code fragment.
01 <Window
01 x:Class="myClass" xmlns=
01 "http://schemas.microsoft.com/winfx/2006/xaml/presentation"
01 xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
01 Title="myWindow" Height="300" Width="300">
02 <StackPanel Background="Black">
03
04 <StackPanel HorizontalAlignment="Center"
04 Orientation="Horizontal">
05 ?<Button Name="btnPlay" Margin="10" Content="Play" />
06 </StackPanel>
07
08 </StackPanel>
09 </Window>
You need to ensure that the application plays only the first 10 seconds of a video that you want to preview.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Insert the following XAML fragment at line 03.
<MediaElement Name="myMediaElement" Stretch="Fill" />
B. Insert the following XAML fragment at line 03.
<MediaElement Name="myMediaElement"
Source="MediaFileSelected.wmv" Stretch="Fill" />
C. Create the following method in the code-behind file.
Public Sub PlayMedia(ByVal sender As Object, _
ByVal args As RoutedEventArgs)
myMediaElement.Play()
End Sub
D. Insert the following XAML fragment at line 07.
<StackPanel.Triggers>
<EventTrigger RoutedEvent="Button.Click" SourceName="btnPlay">
<EventTrigger.Actions>
<BeginStoryboard Name= "myBegin">
<Storyboard SlipBehavior="Slip">
<MediaTimeline Source="MediaFileSelected.wmv"
Storyboard.TargetName="myMediaElement"
BeginTime="0:0:0" Duration="0:0:10" />
</Storyboard>
</BeginStoryboard>
</EventTrigger.Actions>
</EventTrigger>
</StackPanel.Triggers>
E. Insert the following XAML fragment at line 07.
<StackPanel.Triggers>
<EventTrigger RoutedEvent="Button.Click" SourceName="btnPlay">
<EventTrigger.Actions>
<BeginStoryboard Name= "myBegin">
<Storyboard SlipBehavior="Slip">
<MediaTimeline
Storyboard.TargetName="myMediaElement"
BeginTime="0:0:0" Duration="0:0:10" />
</Storyboard>
</BeginStoryboard>
</EventTrigger.Actions>
</EventTrigger>
</StackPanel.Triggers>
Answer: A AND D
Microsoft 70-502 70-502 70-502 70-502기출문제
25. You are creating a Windows Presentation Foundation application.
You create a window for the application. The application contains an audio file named
AudioFileToPlay.wav.
You need to ensure that the audio file is played each time you click the client area of the window.
What should you do?
A. Add the following XAML line of code to the window.
<MediaElement Source="AudioFileToPlay.wav" />
B. Add the following code segment to the window constructor method in the code-behind file.
SoundPlayer player = new SoundPlayer();
player.SoundLocation = "AudioFileToPlay.wav";
player.Play();
C. Add the following code segment to the window MouseDown method in the code-behind file.
MediaPlayer player = new MediaPlayer();
player.SetValue(MediaElement.SourceProperty,new Uri("AudioFileToPlay.wav", UriKind.Relative));
player.Play();
D. Add the following XAML code fragment to the window.
<Window.Triggers>
<EventTrigger RoutedEvent="Window.MouseDown">
<EventTrigger.Actions>
<SoundPlayerAction Source="AudioFileToPlay.wav"/>
</EventTrigger.Actions>
</EventTrigger>
</Window.Triggers>
Answer: D
Microsoft pdf 70-502덤프 70-502 dumps 70-502
26. You are creating a Windows Presentation Foundation application.
You create a window for the application. The application contains an audio file named
AudioFileToPlay.wav.
You need to ensure that the following requirements are met:
The audio file is played each time you click the client area of the window.
The window provides optimal performance when the audio file is being played.
What should you do?
A
Add the following XAML line of code to the window.
<MediaElement Source="AudioFileToPlay.wav" />
B. Add the following code segment to the window constructor method in the code-behind file.
Dim player As New SoundPlayer()
player.SoundLocation = "AudioFileToPlay.wav"
player.Play()
C. Add the following code segment to the window MouseDown method in the code-behind file.
Dim player As New MediaElement()
player.Source = New Uri("AudioFileToPlay.wav", UriKind.Relative)
player.LoadedBehavior = MediaState.Manual
player.Play()
D. Add the following XAML code fragment to the window.
<Window.Triggers>
<EventTrigger RoutedEvent="Window.MouseDown">
<EventTrigger.Actions>
<SoundPlayerAction Source="AudioFileToPlay.wav"/>
</EventTrigger.Actions>
</EventTrigger>
</Window.Triggers>
Answer: D
Microsoft 70-502 70-502인증 70-502 dump 70-502최신덤프 70-502
27. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5. Your project contains a folder named Data.
You add an MP3 file named song.mp3 in the Data folder. You set the Build Action property of the MP3 file
to Resource.
You need to access the MP3 file from the application.
Which code segment should you use?
A. Uri uri = new Uri("/Data/song.mp3", UriKind.Relative);
StreamResourceInfo sri=Application.GetContentStream(uri);
Stream stream=sri.Stream;
B. Uri uri = new Uri("/Data/song.mp3", UriKind.Relative);
StreamResourceInfo sri=Application.LoadComponent(uri);
Stream stream=sri.Stream;
C. Uri uri = new Uri("/Data/song.mp3", UriKind.Relative);
StreamResourceInfo sri=Application.GetRemoteStream(uri);
Stream stream=sri.Stream;
D. Uri uri = new Uri("/Data/song.mp3", UriKind.Relative);
StreamResourceInfo sri=Application.GetResourceStream(uri);
Stream stream=sri.Stream;
Answer: D
Microsoft 70-502 70-502 70-502최신덤프
28. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5. Your project contains a folder named Data.
You add a .MP3 file named song.mp3 in the Data folder. You set the Build Action property of the
application to Resource.
You need to access the .MP3 file from one of the application classes.
Which code segment should you use?
A. Dim uri As New Uri("/Data/song.mp3", UriKind.Relative)
Dim sri As StreamResourceInfo = Application.GetContentStream(uri)
Dim stream As Stream = sri.Stream
B. Dim uri As New Uri("/Data/song.mp3", UriKind.Relative)
Dim sri As StreamResourceInfo = Application.LoadComponent(uri)
Dim stream As Stream = sri.Stream
C. Dim uri As New Uri("/Data/song.mp3", UriKind.Relative)
Dim sri As StreamResourceInfo = Application.GetRemoteStream(uri)
Dim stream As Stream = sri.Stream
D. Dim uri As New Uri("/Data/song.mp3", UriKind.Relative)
Dim sri As StreamResourceInfo = Application.GetResourceStream(uri)
Dim stream As Stream = sri.Stream
Answer: D
Microsoft자격증 70-502자격증 70-502 70-502 70-502
29. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
The application has a window that programatically displays an image. The window contains a grid named
theGrid.
The window displays images in their actual size of 1024 pixels wide or larger. You want the images to be
200 pixels wide.
You write the following code segment. (Line numbers are included for reference only.)
01 Image theImage=new Image();
02 theImage.Width=200;
03 BitmapImage theBitmapImage=new BitmapImage();
04
05 theImage.Source=theBitmapImage;
06 theGrid.Children.Add(theImage);
You need to ensure that the application meets the following requirements:
The window uses the least amount of memory to display the image.
The image is not skewed.
Which code segment should you insert at line 04?
A. theBitmapImage.UriSource=new Uri(@"imageToDisplay.jpg");
theBitmapImage.DecodePixelWidth=200;
B. theBitmapImage.BeginInit();
theBitmapImage.UriSource=new Uri(@"imageToDisplay.jpg");
theBitmapImage.EndInit();
C. theBitmapImage.BeginInit();
theBitmapImage.UriSource=new Uri(@"imageToDisplay.jpg");
theBitmapImage.DecodePixelWidth=200;
theBitmapImage.EndInit();
D. theBitmapImage.BeginInit();
theBitmapImage.UriSource=new Uri(@"imageToDisplay.jpg");
theBitmapImage.DecodePixelWidth=200;
theBitmapImage.DecodePixelHeight=200;
theBitmapImage.EndInit();
Answer: C
Microsoft 70-502 70-502 70-502최신덤프
30. You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
The application has a window that programatically displays an image. The window contains a grid named
theGrid.
The window displays images in their actual size. You want the images to be 200 pixels wide. You write the
following code segment.
01 Dim theImage As New Image()
02 theImage.Width = 200
03 Dim theBitmapImage As New BitmapImage()
04
05 theImage.Source = theBitmapImage
06 theGrid.Children.Add(theImage)
You need to ensure that the application meets the following requirements:
The window uses the least amount of memory to display the image.
The image is not skewed.
Which code segment should you insert at line 04?
A. theBitmapImage.UriSource = New Uri("imageToDisplay.jpg")
theBitmapImage.DecodePixelWidth = 200
B. theBitmapImage.BeginInit()
theBitmapImage.UriSource = New Uri("imageToDisplay.jpg")
theBitmapImage.EndInit()
C. theBitmapImage.BeginInit()
theBitmapImage.UriSource = New Uri("imageToDisplay.jpg")
theBitmapImage.DecodePixelWidth = 200
theBitmapImage.EndInit()
D. theBitmapImage.BeginInit()
theBitmapImage.UriSource = New Uri("imageToDisplay.jpg")
theBitmapImage.EndInit()
theBitmapImage.DecodePixelWidth = 200
theBitmapImage.DecodePixelHeight = 200
Answer: C
Microsoft 70-502인증 70-502 70-502기출문제
NO.4 You have created a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5. The application, named EnterpriseApplication.exe, runs over the network.
You add the WindowSize parameter and the WindowPosition parameter to the Settings.settings file by
using the designer at the User Scope Level. The dimensions and position of the window are read from the
user configuration file.
The application must retain the original window size and position for users executing the application.
You need to ensure that the following requirements are met:
?The window dimensions for each user are saved in the user configuration file.
?User settings persist when a user exits the application.
Which configuration setting should you use?
A. Private Sub OnClosing(ByVal sender As Object, ByVal e _
As System.ComponentModel.CancelEventArgs)
My.Settings.Default.WindowPosition = New Point(Me.Left, Me.Top)
My.Settings.Default.WindowSize = New Size(Me.Width, Me.Height)
My.Settings.Default.Save()
End Sub
B. Private Sub OnClosing(ByVal sender As Object, ByVal e As _
System.ComponentModel.CancelEventArgs)
Dim appKey As RegistryKey = _
Registry.CurrentUser.CreateSubKey("Software\EnterpriseApplication")
Dim settingsKey As RegistryKey = _
appKey.CreateSubKey("WindowSettings")
Dim windowPositionKey As RegistryKey = _
settingsKey.CreateSubKey("WindowPosition")
Dim windowSizeKey As RegistryKey = _
settingsKey.CreateSubKey("WindowSize")
windowPositionKey.SetValue("X", Me.Left)
windowPositionKey.SetValue("Y", Me.Top)
windowSizeKey.SetValue("Width", Me.Width)
windowSizeKey.SetValue("Height", Me.Height)
End Sub
C. Private Sub OnClosing(ByVal sender As Object, ByVal e As _
System.ComponentModel.CancelEventArgs)
Dim doc As New System.Xml.XmlDocument()
doc.Load("EnterpriseApplication.exe.config")
Dim nodePosition As System.Xml.XmlNode = _
doc.SelectSingleNode("//setting[@name='WindowPosition']")
nodePosition.ChildNodes(0).InnerText = String.Format("{0},{1}", _
Me.Left, Me.Top)
Dim nodeSize As System.Xml.XmlNode = _
doc.SelectSingleNode("//setting[@name='WindowSize']")
nodeSize.ChildNodes(0).InnerText = String.Format("{0},{1}", _
Me.Width, Me.Height)
doc.Save("UserConfigDistractor2.exe.config")
End Sub
D. Private Sub Window_Closing(ByVal sender As Object, ByVal e As _
System.ComponentModel.CancelEventArgs)
Dim sw As New StreamWriter("EnterpriseApplication.exe.config", True)
sw.WriteLine("<EnterpriseApplication.Properties.Settings>")
sw.WriteLine("<setting name=""WindowSize"" serializeAs=""String"">")
sw.WriteLine(String.Format("<value>{0},{1}</value>", Me.Width, _
Me.Height))
sw.WriteLine("</setting>")
sw.WriteLine("<setting name=""WindowPosition"" _
serializeAs=""String"">")
sw.WriteLine(String.Format("<value>{0},{1}</value>", Me.Left, _
Me.Top))
sw.WriteLine("</setting>")
sw.WriteLine("</UserConfigProblem.Properties.Settings>")
sw.Close()
End Sub
Answer: A
Microsoft 70-502 70-502자료 70-502 pdf
NO.5 You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
3.5.
You add a CommandBinding element to the Window element. The command has a keyboard gesture
CTRL+H. The Window contains the following MenuItem control.
<MenuItem Header="Highlight Content"
Command="local:CustomCommands.Highlight" />
You need to ensure that the MenuItem control is disabled and the command is not executable when the
focus shifts to a TextBox control that does not contain any text.
What should you do?
A. Set the IsEnabled property for the MenuItem control in the GotFocus event handler for the TextBox
controls.
B. Set the CanExecute property of the command to Highlight_CanExecute.
Add the following method to the code-behind file for the window.
private void Highlight_CanExecute(object sender, CanExecuteEventArgs e) {
TextBox txtBox = sender as TextBox;
e.CanExecute = (txtBox.Text.Length > 0);
}
C. Set the CanExecute property of the command to Highlight_CanExecute.
Add the following method to the code behind file for the window.
private void Highlight_CanExecute(object sender, CanExecuteEventArgs e) {
TextBox txtBox = e.Source as TextBox;
e.CanExecute = (txtBox.Text.Length > 0);
}
D. Set the CanExecute property of the command to Highlight_CanExecute.
Add the following method to the code behind file for the window.
private void Highlight_CanExecute(object sender, CanExecuteEventArgs e) {
MenuItem menu = e.Source as MenuItem;
TextBox txtBox = menu.CommandTarget as TextBox;
Menu.IsEnabled = (txtBox.Text.Length > 0);
}
Answer: C
Microsoft 70-502 70-502자료 70-502
NO.6 You are creating a Windows Presentation Foundation application by using Microsoft .NET Framework
ITexamdump의 000-123덤프의 VCE테스트프로그램과 100-101덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-480시험에 대비한 고품질 덤프와 700-104시험 최신버전덤프를 제공해드립니다. 최고품질 MB6-700시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기