ITExamDump는 유일하게 여러분이 원하는IFPUG인증I40-420시험관련자료를 해결해드릴 수 잇는 사이트입니다. ITExamDump에서 제공하는 자료로 응시는 문제없습니다, 여러분은 고득점으로 시험을 통과할 것입니다.
ITExamDump에서 제공해드리는 IFPUG인증 I40-420덤프는 가장 출중한IFPUG인증 I40-420시험전 공부자료입니다. 덤프품질은 수많은 IT인사들로부터 검증받았습니다. IFPUG인증 I40-420덤프뿐만아니라 ITExamDump에서는 모든 IT인증시험에 대비한 덤프를 제공해드립니다. IT인증자격증을 취득하려는 분들은ITExamDump에 관심을 가져보세요. 구매의향이 있으시면 할인도 가능합니다. 고득점으로 패스하시면 지인분들께 추천도 해주실거죠?
시험 번호/코드: I40-420
시험 이름: IFPUG (Certified Function Point Specialist )
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 249 문항
업데이트: 2014-02-10
IFPUG I40-420 시험을 어떻게 통과할수 있을가 고민중이신 분들은ITExamDump를 선택해 주세요. ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공하도록 도와주는 사이트입니다. 최고급 품질의IFPUG I40-420시험대비 덤프는IFPUG I40-420시험을 간단하게 패스하도록 힘이 되어드립니다. ITExamDump 의 덤프는 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다.
ITExamDump의IFPUG인증 I40-420덤프를 공부하시면 한방에 시험을 패스하는건 문제가 아닙니다. ITExamDump의IFPUG인증 I40-420덤프는 시험적중율 최고의 인지도를 넓히 알리고 있습니다.저희가 제공한 시험예상문제로 시험에 도전해보지 않으실래요? IFPUG인증 I40-420덤프를 선택하시면 성공의 지름길이 눈앞에 다가옵니다.
IFPUG I40-420인증시험패스 하는 동시에 여러분의 인생에는 획기적인 일 발생한것이죠, 사업에서의 상승세는 당연한것입니다. IT업계종사자라면 누구나 이런 자격증을 취득하고싶어하리라고 믿습니다. 많은 분들이 이렇게 좋은 인증시험은 아주 어렵다고 생각합니다. 네 많습니다. 패스할확율은 아주 낮습니다. 노력하지않고야 당연히 불가능하죠.IFPUG I40-420시험은 기초지식 그리고 능숙한 전업지식이 필요요 합니다. 우리ITExamDump는 여러분들한테IFPUG I40-420시험을 쉽게 빨리 패스할 수 있도록 도와주는 사이트입니다. 우리ITExamDump의IFPUG I40-420시험관련자료로 여러분은 짧은시간내에 간단하게 시험을 패스할수 있습니다. 시간도 절약하고 돈도 적게 들이는 이런 제안은 여러분들한테 딱 좋은 해결책이라고 봅니다.
IFPUG인증 I40-420시험을 패스하고 싶다면ITExamDump에서 출시한IFPUG인증 I40-420덤프가 필수이겠죠. IFPUG인증 I40-420시험을 통과하여 원하는 자격증을 취득하시면 회사에서 자기만의 위치를 단단하게 하여 인정을 받을수 있습니다.이 점이 바로 많은 IT인사들이IFPUG인증 I40-420시험에 도전하는 원인이 아닐가 싶습니다. ITExamDump에서 출시한IFPUG인증 I40-420덤프 실제시험의 거의 모든 문제를 커버하고 있어 최고의 인기와 사랑을 받고 있습니다. 어느사이트의IFPUG인증 I40-420공부자료도ITExamDump제품을 대체할수 없습니다.학원등록 필요없이 다른 공부자료 필요없이 덤프에 있는 문제만 완벽하게 공부하신다면IFPUG인증 I40-420시험패스가 어렵지 않고 자격증취득이 쉬워집니다.
I40-420 덤프무료샘플다운로드하기: http://www.itexamdump.com/I40-420.html
NO.1 Which of the following is NOT an example of the purpose of a function point count?
A. To enable comparison of functionality delivered by two applications
B. To determine maintenance support cost per function point
C. To understand the percentage of lines of code that is being reused across three different applications
D. To determine the effort and duration of a development project
Answer: C
IFPUG I40-420 I40-420자격증 I40-420자격증
NO.2 "Requirements specifically requested by the user to complete an elementary process" defines which of
the following terms?
A. Control information
B. Processing logic
C. Maintain
D. User identifiable
Answer: B
IFPUG인증 I40-420 I40-420 I40-420시험문제
NO.3 Which of the following statements regarding functional size measurement is true?
A. Early functional size measurements can never change during design and coding phase
B. It is quite normal to identify additional functionality that was not specified in the original requirements in
the form of scope creep
C. It is not necessary to update the application functional size upon completion of an enhancement.
D. Both B and C
Answer: B
IFPUG I40-420시험문제 I40-420
NO.4 An EI is defined as:
A. an elementary process that processes data sent from outside the application boundary
B. control information sent from outside the user view
C. an elementary process that processes data or control information sent from outside the application's
boundary
D. All of the above
Answer: C
IFPUG자료 I40-420 I40-420 I40-420 I40-420
NO.5 When counting DETs which of the following rules apply?
A. Count a DET for each recursive field on the ILF or EIF
B. Count a DET for each piece of data in an ILF or EIF required by the user to establish a relationship with
another ILF or EIF
C. Count a DET for each repeating field that is identical in format
D. Count a DET for each field that appears more than once in an ILF or EIF
Answer: B
IFPUG I40-420시험문제 I40-420
NO.6 What is true about conversion functionality?
A. Transactional or data functions provided to convert data and /or provide other user specified
conversion requirements
B. Exists only during the development or enhancement of an application
C. Conversion functionality is outside the scope of FP counting
D. Both A and B
Answer: D
IFPUG dumps I40-420 dumps I40-420인증 I40-420 I40-420
NO.7 Which of the following is an attribute used to represent relationships of one entity to another.?
A. Primary key
B. Secondary key
C. Foreign key
D. Domestic key
Answer: C
IFPUG I40-420 I40-420 dumps I40-420덤프 I40-420자료
NO.8 Control information is defined as data that:
A. defines an elementary process of the application being counted
B. influences an elementary process of the application being counted
C. controls an elementary process of the application being counted
D. does not influence an elementary process of the application being counted
Answer: B
IFPUG I40-420덤프 I40-420 dump
NO.9 Which of the following statements regarding the counting scope is true?
A. It defines the set of Functional User Requirements to be included in the FP count
B. It always includes more than one application
C. It determines the purpose of the applications being counted
D. It defines a (sub) set of the modules being sized
Answer: A
IFPUG인증 I40-420 I40-420기출문제 I40-420 I40-420 pdf
NO.10 The primary intent of an EI is to maintain:
A. One or more ILFs or alter the behavior of the application
B. One or more ILFs
C. One or more EIFs or alter the behavior of the application
D. One or more EIFs
Answer: A
IFPUG기출문제 I40-420 I40-420 I40-420 dump
NO.11 Which of the following defines the purpose of a count?
A. Provides an answer to a business question, and it is the business question that determines the
purpose
B. Influences the positioning of the application between the software under review and the surrounding
software
C. Influences the type of FP count to answer the business problem under investigation
D. Provides an input to the estimation process needed to determine the level of effort required to develop
the first release of an application
Answer: A
IFPUG I40-420자료 I40-420
NO.12 What is a user identifiable group of logically related data or control information referenced by the
application, but maintained within the boundary of another application?
A. An ILF
B. An IIF
C. An EIF
D. An ELF
Answer: C
IFPUG dump I40-420자격증 I40-420
NO.13 What is a (are) valid example(s) of code data?
A. Substitution data
B. Static data
C. Valid values
D. All of the above
Answer: D
IFPUG덤프 I40-420 I40-420자료
NO.14 An application FP count is defined as:
A. a measure of the current functions the application provides the user
B. the initial development project FP count
C. an enhancement project that alters the applications functions
D. the activity of applying this International Standard to measure the functional size of an application
Answer: D
IFPUG덤프 I40-420 I40-420
NO.15 Which category (ies) of data entities is (are) usually identified to satisfy the Functional User
Requirements?
A. Business data
B. Reference data
C. Code data
D. Both A and B
Answer: D
IFPUG I40-420 I40-420 I40-420기출문제
NO.16 What is an elementary process?
A. The smallest unit of activity that is meaningful to the developer
B. The largest unit of activity that is meaningful to the user
C. The smallest unit of activity that is meaningful to the user
D. The largest unit of activity that is meaningful to the developer
Answer: C
IFPUG시험문제 I40-420 I40-420 dumps I40-420 I40-420
NO.17 An example of the purpose of an FP count is to provide:
A. input to the estimation process needed to determine the level of effort to develop the first release of an
application
B. a comparison of functionality delivered by two different suppliers' packages
C. determine the size of an application as part of the organization's effort to determine the size of its
software portfolio
D. All of the above
Answer: D
IFPUG I40-420 I40-420기출문제 I40-420 I40-420
NO.18 Which of the following statements about an External Input is true?
A. Has the primary intent to maintain one or more ILFs
B. An elementary process to hold data or control information from outside the boundary
C. Has the primary intent to alter the behavior of a transaction
D. Has the primary intent to reference one or more EIFs
Answer: A
IFPUG자격증 I40-420 dump I40-420 I40-420
NO.19 Which of the following is NOT true of a boundary?
A. It encloses the logical data maintained by the application
B. It is the physical interface between the software under study and its users
C. It is dependent on the user's external business view of the application and is independent of technical
and/or implementation considerations
D. It defines what is external to the application
Answer: B
IFPUG자료 I40-420 I40-420 I40-420시험문제 I40-420
NO.20 Which of the following statements is (are) true regarding an application functional size (FS)?
A. It provides a measure of the functionalities that an application provides to the user
B. It is never updated after the initial application installation
C. It is associated with an application's lifecycle
D. Both A and C
Answer: D
IFPUG최신덤프 I40-420 dumps I40-420 I40-420덤프
ITexamdump의 70-462덤프의 VCE테스트프로그램과 70-465덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP2-N44시험에 대비한 고품질 덤프와 JN0-696시험 최신버전덤프를 제공해드립니다. 최고품질 C4120-783시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기