SUN인증 310-610시험을 패스하는 지름길은ITExamDump에서 연구제작한 SUN 인증310-610시험대비 덤프를 마련하여 충분한 시험준비를 하는것입니다. 덤프는 SUN 인증310-610시험의 모든 범위가 포함되어 있어 시험적중율이 높습니다. SUN 인증310-610시험패는 바로 눈앞에 있습니다. 링크를 클릭하시고ITExamDump의SUN 인증310-610시험대비 덤프를 장바구니에 담고 결제마친후 덤프를 받아 공부하는것입니다.
현재SUN 310-610인증시험을 위하여 노력하고 있습니까? 빠르게SUN인증 310-610시험자격증을 취득하고 싶으시다면 우리 ITExamDump 의 덤프를 선택하시면 됩니다,. ITExamDump를 선택함으로SUN 310-610인증시험패스는 꿈이 아닌 현실로 다가올 것입니다,
시험 번호/코드: 310-610
시험 이름: SUN (EDS Certified Sun Fire Workgroup Administrator)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 139 문항
업데이트: 2013-09-10
310-610인증시험패스는 쉬운 일은 아닙니다. 높은 전문지식은 필수입니다.하지만 자신은 이 방면 지식이 없다면 ITExamDump가 도움을 드릴 수 있습니다. ITExamDump의 전문가들이 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어 여러분들의 고민을 해결해드릴 수 있습니다. 우리는 최고의310-610인증시험문제와 답을 제공합니다. ITExamDump는 최선을 다하여 여러분이 한번에310-610인증시험을 패스하도록 도와드릴 것입니다. 여러분은 우리 ITExamDump 선택함으로 일석이조의 이익을 누릴 수 있습니다. 첫쨰는 관여지식은 아주 알차게 공부하실 수 있습니다.둘째는 바로 시험을 안전하게 한번에 통과하실 수 있다는 거죠.그리고 우리는 일년무료 업데이트서비스를 제공합니다.덤프가 업뎃이되면 우리는 모두 무료로 보내드립니다.만약 시험에서 실패한다면 우리 또한 덤프비용전액을 환불해 드립니다.
경쟁이 치열한 IT업계에서 굳굳한 자신만의 자리를 찾으려면 국제적으로 인정받는 IT자격증 취득은 너무나도 필요합니다. SUN인증 310-610시험은 IT인사들중에서 뜨거운 인기를 누리고 있습니다. ITExamDump는 IT인증시험에 대비한 시험전 공부자료를 제공해드리는 전문적인 사이트입니다.한방에 쉽게SUN인증 310-610시험에서 고득점으로 패스하고 싶다면ITExamDump의SUN인증 310-610덤프를 선택하세요.저렴한 가격에 비해 너무나도 높은 시험적중율과 시험패스율, 언제나 여러분을 위해 최선을 다하는ITExamDump가 되겠습니다.
ITExamDump의 SUN인증 310-610덤프의 무료샘플을 이미 체험해보셨죠? ITExamDump의 SUN인증 310-610덤프에 단번에 신뢰가 생겨 남은 문제도 공부해보고 싶지 않나요? ITExamDump는 고객님들의 시험부담을 덜어드리기 위해 가벼운 가격으로 덤프를 제공해드립니다. ITExamDump의 SUN인증 310-610로 시험패스하다 더욱 넓고 좋은곳으로 고고싱 하세요.
수많은SUN인증 310-610시험공부자료중에서ITExamDump의SUN인증 310-610덤프가 가장 출중한 원인은 무엇일가요? ITExamDump의SUN인증 310-610덤프는 실제시험문제의 출제방향을 연구하여 IT전문가로 되어있는 덤프제작팀이 만든 최신버전 덤프입니다. ITExamDump의SUN인증 310-610덤프가 있으면 힘든SUN인증 310-610시험이 쉬어져서 자격증을 제일 빠른 시간내에 취득할수 있습니다.제일 어려운 시험을 제일 간단한 방법으로 패스하는 방법은ITExamDump의SUN인증 310-610덤프로 시험준비 공부를 하는것입니다.
310-610 덤프무료샘플다운로드하기: http://www.itexamdump.com/310-610.html
NO.1 You want to change the background color of a cell or cell range? Which of the following menus and/or
commands enables you to do this?
A. Highlight the cells and select Format > Cells > Background
B. Highlight the cells, right-click with the mouse and select Format Cells > Background
C. Highlight the cells and press F11 to display the Styles and Formatting Palette, select the highlighted
style, right-click the mouse button and select Modify > Background
D. Highlight the cells, right-click the mouse button, and select a color from the Background Color
drop-down menu
Answer: ABC
SUN최신덤프 310-610 310-610 310-610
NO.2 Which of the following statements about OpenOffice.org 3 Calc is correct?
A. Calc is a spreadsheet program in which you can enter text, numbers and formulas.
B. Calc is primarily an image-processing tool.
C. A major benefit of Calc is the ability to enter formulas and recalculate the results automatically after
changing the initial values.
D. Calc saves each individual table (data sheet) as a separate file.
Answer: AC
SUN 310-610 dumps 310-610기출문제 310-610 310-610 dump
NO.3 Which of the following statements best describes a template?
A. A template is a document that contains specific user information (e.g., company, name, telephone
number)
B. A template is a document that contains specific formatting styles, graphics, tables, object, and other
information. A template is used as the basis for creating other documents
C. A template is a pool of formats, collected in the normal.dot file for central usage
D. A template is a well-formatted document. To reuse a template you must copy and save with a new
name for further usage
Answer: C
SUN 310-610 310-610 pdf
NO.4 You want to nest the following series of functions in a single cell: sum(sum(sum(a1:a17);b1:b17). Does
OpenOffice.org 3 Calc allow such nesting of functions?
A. Yes
B. No
C. Yes, but only for up to three separate functions in a single cell
D. By default no, but you can enable function nesting under Tools > Options > OpenOffice.org Calc
Answer: A
SUN 310-610 310-610기출문제
NO.5 You want to apply the following effect to the headline of your sheet. Which of the following menus
and/or commands enables you to do this?
A. Highlight the cells, right-click with the mouse and select Format Cells > Font Effects > Text Alignment
45 Deg
B. Display the Text Container Component from the Drawing Bar an rotate the cell in the Cell Alignment
dialog box
C. Highlight the cells, right-click with the mouse and select Format Cells > Alignment > Text Orientation 45
Deg
D. Highlight the cells and press the icon rai4a36be783f21 to rotate the cell content
Answer: C
SUN 310-610 310-610최신덤프 310-610 310-610 pdf
NO.6 How many conditions can be defined maximum for a single cell or cell range using the menu
command Format > Conditional Formatting?
A. 3
B. 4
C. 6
D. Unlimited
Answer: A
SUN시험문제 310-610 pdf 310-610자격증 310-610기출문제 310-610 dumps
NO.7 You want to add a customized header to your spreadsheet. Which of the following menus and/or
commands enables you to do this?
A. Format > Page > Header, set the checkbox Header on and edit it
B. Right-click on the sheet and select Page > Header, set the checkbox Header on and edit it
C. Open the Styles and Formatting Palette and select the wanted Page Style > Modify > Header, set the
checkbox Header on and edit it
D. Select Format > Header, set the checkbox Header on and edit it
Answer: AC
SUN 310-610 310-610 310-610 dump
NO.8 You want to change the font type or font size of the main chart title. Which of the following menus
and/or commands enables you to do this?
A. Double click on the chart, select Format > Title > Main Title
B. Double click on the chart, single click on the title, right-click on the selected title and select object
properties
C. Double click on the chart, select Format > Title > All Titles
D. Right-click on the chart, select Format, select Chart Properties, from the Title section of the Chart
Properties dialog box, change the formatting options
Answer: ABC
SUN자격증 310-610 310-610 310-610최신덤프
NO.9 You want to create a new chart. Which of the following menus and/or commands enables you to do
this?
A. Select the appropriate data, start the chart wizard by selecting Format > Chart
B. Select the appropriate data, start the chart wizard by selecting the following icon: "Xddq4a36be901ff8
C. Select the appropriate data, start the chart wizard by selecting Edit > Chart
D. Select the appropriate data, start the chart wizard by selecting the following icon fcQ4a36be904f00
Answer: B
SUN덤프 310-610 310-610
NO.10 You want to apply conditional formatting to a cell or cell range. Which of the following must you
consider?
A. You have to define a minimum set of 3 different cell formats first
B. You have to define a minimum set of 2 different cell formats first
C. You have to define a minimum set of 4 different cell formats first
D. You have to define a minimum set of 1 different cell formats first
Answer: D
SUN 310-610기출문제 310-610 310-610 310-610인증
NO.11 What do you have to do to print out a single sheet in landscape format and all other sheets in portrait
format if you want to perform it with a single print job?
A. Select the appropriate sheet, then select Format > Page > Tab Page, and then select Landscape.
Portrait is now the default page orientation for all other sheets
B. Select the appropriate sheet, display the Styles and Formatting Palette, under the formatting tab select
Page Styles > Select Default > Modify, select the Page tab, and select Page Orientation Landscape, press
OK. Portrait is the default page orientation for all other sheets
C. Display the Styles and Formatting Palette, under the formatting tab select Page Styles > right-click,
select New, select the Page tab, under Page Orientation select Landscape and press OK. Apply new
page style to specific sheet. Portrait is the default page orientation for all other sheets
D. Display the Styles and Formatting Palette, under the formatting tab select Page Styles > Select
Default > New > Define A New Page Style, select the Page tab, and select Page Orientation Portrait,
press OK. Apply new page style to all specific sheets. Landscape is the default page orientation for all
other sheets
Answer: C
SUN dumps 310-610 310-610자료 310-610시험문제
NO.12 What happens when you apply the Autoformat function to a cell range?
A. You select a predefined print layout with customized headings, footer etc.
B. You select a predefined cell or table layout with predefined cell formats (fonts, colors, number
formats...)
C. You can select from a set of predefined document formats for complex spreadsheets including
formulas and links to databases, etc.
D. You start a wizard to customize the layout of your spreadsheet
Answer: C
SUN 310-610 pdf 310-610
NO.13 What will happen when you press this icon? (Select some cells to enable the icon)
A. A selected cell range will be merged as a single cell
B. The content of a selected cell or cell range will be cleared
C. A merged cell range will be split again into single cells
D. A merged cell range dialog box displays allowing you to name the range to be used as a variable in a
formula
Answer: AC
SUN최신덤프 310-610인증 310-610 310-610
NO.14 What do you have to do to create a new cell style?
A. Format a cell or cell range, select it and select Format > Cells > New Style
B. Format a cell or cell range, select it, right-click and select Entry Apply Style
C. Format a cell or cell range, select it, display the Styles and Formatting Palette and select New Style
from Selection
D. Format a cell or cell range, select it and select Format > New Styles
Answer: C
SUN 310-610 310-610시험문제 310-610 310-610
NO.15 You copy the content of a cell or cell range from one spreadsheet document to another spreadsheet
document. Which of the following must you consider?
A. By default the cell content and all formats will be copied to the new spreadsheet
B. If a cell format with the same name exists in the target sheet, the cell format from the copied content
overwrites the target sheets formatting, retaining the original formatting from the source
C. If a cell format with the same name exists in the target sheet, all format information from the source
sheet is lost
D. If a cell format with the same name exists in the target sheet, a dialog will be prompted and you can
select overwrite existing styles
Answer: AC
SUN덤프 310-610 310-610시험문제 310-610기출문제 310-610
NO.16 If you enable the entry Tools > Options > Openoffice.Org 3 Calc > General > Expand references when
new columns / rows are inserted. Which of the following statements is true?
A. If you insert a new entry to a column of values, a formula referencing this column (e.g., sum(A1:A4) )
will expand the reference (e.g. sum(A1:A5) )
B. If you insert a new row to the column of values, a formula referencing this column (e.g., sum(A1:A4) )
will expand the reference (e.g. sum(A1:A5) ) automatically
C. If you insert a new row to the column of values, a formula referencing this column (e.g., sum(A1:A4) )
will not expand the reference (e.g. sum(A1:A5) ) automatically, you have to do it by hand.
D. If you insert a new row to the column of values, a formula referencing this column (e.g., sum(A1:A4) )
will not be changed, this option takes only effect on styles.
Answer: E
SUN 310-610 310-610 dumps 310-610
NO.17 To define your own AutoFormat settings, what is the minimum range of cells you have to format first?
A. A single cell is enough
B. You need 2x2 cells minimum
C. You need 3x3 cells minimum
D. You need 4x4 cells minimum
Answer: D
SUN자격증 310-610 310-610
NO.18 You want to display the formulas in each cell rather than the result of the formula. Which of the following
menus and/or commands enables you to do this?
A. View > Formulas
B. Right-click into a cell and select Formulas Visible from the context menu
C. Tools > Options > OpenOffice.org Calc > View > select the Formulas checkbox from the Display
section
D. View > Data Sources
Answer: C
SUN최신덤프 310-610자격증 310-610 310-610
NO.19 To apply a predefined AutoFormat to a cell range, what is the minimum cell range you have to select?
A. A single cell is enough
B. You need 2x2 cells minimum
C. You need 3x3 cells minimum
D. You need 4x4 cells minimum
Answer: D
SUN 310-610 310-610시험문제 310-610
NO.20 You want to make the Tools Toolbar permanently visible. Which of the following menus and/or
commands enables you to do this?
A. Tools > Toolbars Bars > select make active Toolbars default
B. Tools > Customize > Toolbars > set the Tools Toolbar to default
C. View > Toolbars > select Tools
D. View > Toolbars > select visible tools checkbox
Answer: C
SUN시험문제 310-610 310-610덤프 310-610 310-610
NO.21 You want to format a cell or cell range as currency. Which of the following icons enables you to do this?
A. _
댓글 없음:
댓글 쓰기