Juniper JN0-660 시험문제

ITExamDump의Juniper인증 JN0-660덤프는 고객님의 IT인증자격증을 취득하는 소원을들어줍니다. IT업계에 금방 종사한 분은 자격증을 많이 취득하여 자신만의 가치를 업그레이드할수 있습니다. ITExamDump의Juniper인증 JN0-660덤프는 실제 시험문제에 대비하여 연구제작된 퍼펙트한 시험전 공부자료로서 시험이 더는 어렵지 않게 느끼도록 편하게 도와드립니다.

ITExamDump에서는 Juniper인증 JN0-660시험을 도전해보시려는 분들을 위해 퍼펙트한 Juniper인증 JN0-660덤프를 가벼운 가격으로 제공해드립니다.덤프는Juniper인증 JN0-660시험의 기출문제와 예상문제로 제작된것으로서 시험문제를 거의 100%커버하고 있습니다. ITExamDump제품을 한번 믿어주시면 기적을 가져다 드릴것입니다.

안심하시고ITExamDump 를 선택하게 하기 위하여, ITExamDump에서는 이미Juniper JN0-660인증시험의 일부 문제와 답을 사이트에 올려놨으니 체험해보실 수 있습니다. 그러면 저희한테 신뢰가 갈 것이며 또 망설임 없이 선택하게 될 것입니다. 저희 덤프로 여러분은 한번에 시험을 패스할 수 있으며 또 개인시간도 절약하고 무엇보다도 금전상으로 절약이 제일 크다고 봅니다. ITExamDump는 여러분들한테 최고의Juniper JN0-660문제와 답을 제공함으로 100%로의 보장 도를 자랑합니다, 여러분은Juniper JN0-660인증시험의 패스로 IT업계여서도 또 직장에서도 한층 업그레이드되실 수 있습니다. 여러분의 미래는 더욱더 아름다울 것입니다.

시험 번호/코드: JN0-660

시험 이름: Juniper (Service Provider Routing and Switching, Professional)

우리사이트가 다른 덤프사이트보다 우수한 점은 바로 자료들이 모두 전면적이고 적중률과 정확입니다. 때문에 우리ITExamDump를 선택함으로Juniper인증JN0-660시험준비에는 최고의 자료입니다. 여러분이 성공을 위한 최고의 자료입니다.

저희는 수많은 IT자격증시험에 도전해보려 하는 IT인사들께 편리를 가져다 드리기 위해 Juniper JN0-660실제시험 출제유형에 근거하여 가장 퍼펙트한 시험공부가이드를 출시하였습니다. 많은 사이트에서 판매하고 있는 시험자료보다 출중한ITExamDump의 Juniper JN0-660덤프는 실제시험의 거의 모든 문제를 적중하여 고득점으로 시험에서 한방에 패스하도록 해드립니다. Juniper JN0-660시험은ITExamDump제품으로 간편하게 도전해보시면 후회없을 것입니다.

Juniper인증 JN0-660시험을 패스하고 싶다면ITExamDump에서 출시한Juniper인증 JN0-660덤프가 필수이겠죠. Juniper인증 JN0-660시험을 통과하여 원하는 자격증을 취득하시면 회사에서 자기만의 위치를 단단하게 하여 인정을 받을수 있습니다.이 점이 바로 많은 IT인사들이Juniper인증 JN0-660시험에 도전하는 원인이 아닐가 싶습니다. ITExamDump에서 출시한Juniper인증 JN0-660덤프 실제시험의 거의 모든 문제를 커버하고 있어 최고의 인기와 사랑을 받고 있습니다. 어느사이트의Juniper인증 JN0-660공부자료도ITExamDump제품을 대체할수 없습니다.학원등록 필요없이 다른 공부자료 필요없이 덤프에 있는 문제만 완벽하게 공부하신다면Juniper인증 JN0-660시험패스가 어렵지 않고 자격증취득이 쉬워집니다.

멋진 IT전문가로 거듭나는 것이 꿈이라구요? 국제적으로 승인받는 IT인증시험에 도전하여 자격증을 취득해보세요. IT전문가로 되는 꿈에 더 가까이 갈수 있습니다. Juniper인증 JN0-660시험이 어렵다고 알려져있는건 사실입니다. 하지만ITExamDump의Juniper인증 JN0-660덤프로 시험준비공부를 하시면 어려운 시험도 간단하게 패스할수 있는것도 부정할수 없는 사실입니다. ITExamDump의Juniper인증 JN0-660덤프는 실제시험문제의 출제방형을 철저하게 연구해낸 말 그대로 시험대비공부자료입니다. 덤프에 있는 내용만 마스터하시면 시험패스는 물론 멋진 IT전문가로 거듭날수 있습니다.

JN0-660 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-660.html

NO.1 In which two ways does VPLS populate the MAC table? (Choose two.)
A. dynamically using BGP
B. dynamically using the source MAC address on received frames
C. dynamically using LDP
D. statically using CLI
Answer: B, D

Juniper   JN0-660   JN0-660자료   JN0-660 pdf   JN0-660덤프

NO.2 Click the Exhibit button.
You are asked to configure an OSPF network based on the topology shown in the exhibit. You must keep
the link-state database in Area 1 as small as possible. What will accomplish this?
A. Area 0 should be configured as a stub area so that it will not announce routes into Area 1.
B. Area 1 should be configured as an NSSA to limit the size of the link-state database.
C. Area 1 should be configured as a stub area with no-summaries to limit the size of the link-state
database.
D. Area 0 should be configured with a virtual link to R4 to limit the size of the Area 1 link-state database.
Answer: C

Juniper   JN0-660인증   JN0-660자격증   JN0-660   JN0-660 dumps   JN0-660

NO.3 You manage an MPLS network where the PE devices consist of multiple vendors.
You are asked to conceal the MPLS topology for all LSPs.
Which global configuration parameter will accomplish this?
A. Configure no-decrement-ttl on the ingress router only.
B. Configure no-propagate-ttl on the ingress router only.
C. Configure no-decrement-ttl on all routers within the MPLS network.
D. Configure no-propagate-ttl on all routers within the MPLS network.
Answer: D

Juniper dumps   JN0-660자격증   JN0-660 pdf   JN0-660   JN0-660 dump   JN0-660기출문제

NO.4 Click the Exhibit button.
In the exhibit, Area 1 is a not-so-stubby area.
Three networks are redistributed into Area 1 on R2.
You must summarize the redistributed network addresses in Area 1 so that only one network prefix is
re-advertised into Area 0. You must also summarize the loopback addresses of R1 and R2 into a single
address in Area 0.Which configuration sample on R3 and R5 will complete this task?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C

Juniper   JN0-660 pdf   JN0-660   JN0-660덤프   JN0-660기출문제   JN0-660자격증

NO.5 Your multicast receivers are indirectly connected to an MX Series router. The receivers need to join
multicast group 224.2.2.2. What must be configured in IGMP to receive report messages from receivers
that are multiple hops away?
A. By default, IGMP accepts report messages from indirectly connected receivers.
B. Promiscuous mode must be enabled in IGMP.
C. Promiscuous mode must be disabled in IGMP.
D. DVMRP protocol must be configured.
Answer: B

Juniper   JN0-660   JN0-660   JN0-660자격증   JN0-660   JN0-660 dumps

NO.6 Click the Exhibit button.
On your MX Series router, traffic using the critical scheduler is out of profile. All other data is currently in
profile. Referring to the exhibit, which statement is correct?
A. The critical queue is serviced before the less-critical queue.
B. The critical queue is serviced after the left-over queue.
C. The critical queue is serviced before the data queue.
D. The critical queue is serviced before the voice queue.
Answer: B

Juniper기출문제   JN0-660 dumps   JN0-660 dumps   JN0-660

NO.7 Which two statements are true about OSPFv3? (Choose two.)
A. OSPFv3 uses a 32-bit router ID to uniquely identify a node in the network.
B. OSPFv3 uses a 128-bit router ID to uniquely identify a node in the network.
C. OSPFv3 routes are always preferred over OSPFv2 routes for all traffic.
D. OSPFv3 and OSPFv2 can be configured at the same time.
Answer: A, D

Juniper   JN0-660 dumps   JN0-660최신덤프

NO.8 Click the Exhibit button.
Referring to the exhibit, which MPLS feature was used to make the LSP the preferred path for internal
routes.?
A. traffic engineering bgp-igp
B. traffic engineering shortcuts
C. traffic engineering mpls-forwarding
D. install active
Answer: C

Juniper   JN0-660   JN0-660   JN0-660

NO.9 Which operational mode command displays the number of configured forwarding classes?
A. show interfaces queue ge-1/0/0
B. show interfaces terse
C. show class-of-service interface
D. show forwarding classes
Answer: A

Juniper   JN0-660 dumps   JN0-660 dump   JN0-660인증   JN0-660   JN0-660

NO.10 You are the administrator for a network that uses IBGP. As the network grows, you must examine
options to support increased scale.
Which two scaling options should you consider? (Choose two.)
A. route reflection
B. areas
C. zones
D. confederations
Answer: B, C

Juniper자격증   JN0-660   JN0-660최신덤프

NO.11 Click the Exhibit button.
Based on the configuration in the exhibit, which statement is correct?
A. The 172.20.20.0/24 route is installed in the inet.0 table with the next hop of the LSP.
B. The 172.20.20.0/24 route is installed in the mpls.0 table with the next hop of the LSP.
C. The 172.20.20.0/24 route is installed in the inet.3 table with the next hop of the LSP.
D. The 172.20.20.0/24 route is installed in the inet6.3 table with the next hop of the LSP.
Answer: C

Juniper   JN0-660인증   JN0-660 dump   JN0-660자격증   JN0-660최신덤프

NO.12 Your are the administrator for a network that uses IS-IS as its IGP. As the network grows, you find that
the protocol's default capabilities for setting metrics is limiting your options. Which feature can you
implement to provide a larger range of metric configuration capabilities?
A. extended metrics
B. wide metrics
C. expanded metrics
D. full metrics
Answer: D

Juniper dump   JN0-660   JN0-660시험문제   JN0-660

NO.13 Click the Exhibit button.
Referring to the exhibit, which type of traffic protection mechanism is used for the LSP?
A. fast-reroute
B. link-protection
C. node-link-protection
D. secondary
Answer: B

Juniper덤프   JN0-660최신덤프   JN0-660

NO.14 Click the Exhibit button.
In the exhibit, ISP A is charged a higher rate for traffic sent to R2. You are asked to lower costs for ISP A
by configuring R1 to send traffic to R3 whenever possible.
What are two ways to do this? (Choose two.)
A. set protocols bgp group isp-b neighbor 192.0.2.6 local-preference 120
B. set protocols bgp group isp-b neighbor 192.0.2.6 local-preference 80
C. set protocols bgp group isp-b neighbor 192.0.2.10 local-preference 120
D. set protocols bgp group isp-b neighbor 192.0.2.10 local-preference 80
Answer: B, C

Juniper시험문제   JN0-660기출문제   JN0-660덤프   JN0-660   JN0-660

NO.15 Click the Exhibit button.
All networks shown in the exhibit contain more than one BGP speaking router. You operate ISP A.
You must ensure that customer Y sends their traffic to you over the directly connected link but customer Y
is not used for transit into your network. What do you do to accomplish this? A. Advertise routes to
customer Y with the well-known no-transit community.
B. Advertise routes to customer X with the well-known no-advertise community.
C. Advertise routes to customer Y with the well-known no-export community.
D. Advertise routes to customer X with the well-known as-transit community.
Answer: C

Juniper최신덤프   JN0-660 dump   JN0-660인증   JN0-660최신덤프   JN0-660   JN0-660

NO.16 Which CoS feature supports per-VLAN queuing and scheduling?
A. multilevel scheduling
B. hierarchical scheduling
C. tagged queuing
D. per-instance queuing
Answer: C

Juniper   JN0-660자격증   JN0-660덤프   JN0-660시험문제

NO.17 Click the Exhibit button.
All routers in the exhibit are running IS-IS level 2 routing. The wide-metrics-only parameter is configured
on all routers. Which metric does R1 see for the path to R4?
A. 136
B. 138
C. 310
D. 320
Answer: D

Juniper   JN0-660   JN0-660인증   JN0-660자격증

NO.18 Click the Exhibit button.
Given the drop profile in the exhibit, what is the drop probability when the buffer reaches 90% full?
A. 60%
B. 70%
C. 85%
D. 90%
Answer: B

Juniper자격증   JN0-660시험문제   JN0-660

NO.19 Click the Exhibit button.
As shown in the exhibit, you have an adaptive LSP that requires 85 Mbps. The LSP is configured with a
primary path and a secondary path in standby mode. All connections in the MPLS network are Fast
Ethernet. Which statement is correct?
A. The primary and secondary paths are in an up state and operational.
B. The primary and secondary paths are in a down state and not operational.
C. The secondary path is in a down state and not operational.
D. The primary path is in a down state and not operational.
Answer: A

Juniper자격증   JN0-660 pdf   JN0-660덤프

NO.20 You are provisioning a new customer for access to your Layer 3 VPN. The customer is using
172.16.35.0/24 as their internal IP address space, which is also being used by an existing Layer 3 VPN
customer. The two customers share many PE routers in common across your network. Which mechanism
allows these duplicate addresses to exist in your network?
A. route origin
B. route target
C. route refresh
D. route distinguisher
Answer: D

Juniper인증   JN0-660   JN0-660덤프   JN0-660덤프

연구결과에 의하면Juniper인증 JN0-660시험은 너무 어려워 시험패스율이 낮다고 합니다. ITExamDump의 Juniper인증 JN0-660덤프와 만나면Juniper인증 JN0-660시험에 두려움을 느끼지 않으셔도 됩니다. ITExamDump의 Juniper인증 JN0-660덤프는 엘리트한 IT전문가들이 실제시험을 연구하여 정리해둔 퍼펙트한 시험대비 공부자료입니다. 저희 덤프만 공부하시면 시간도 절약하고 가격도 친근하며 시험준비로 인한 여러방면의 스트레스를 적게 받아Juniper인증 JN0-660시험패스가 한결 쉬워집니다.